I wonder how I can stream FLV videos live with Red5 open source flash server.
I've tried most of the methods I know of, but can not get it to.
script that can stream live FLV videos.
We have a Red5 Server that we use to host a video chat. We are looking for a way to overlay SWF files over the top of a live stream video.For example, we could overlay an SWF animation of snow falling in front of a live stream from a webcam.
View 1 RepliesI have started a stream from Flash media encoder to flash media server. According to my encoder, it should be located at: "rtmp://localhost/live" and is called livestream.In the Flash software I try and set the source of FLVPlayback component to rtmp://localhost/live/livestream", and I get this error: "NetStream.Play.StreamNotFound : Adobe Flash tried to play a live or recorded stream that does not exist. Source can't be found.". Both the server and encoder is runnind and I am encoding.
View 12 Repliessetup multicast event with recorded videos not with live stream. how to setup multicast address that ask in multicast configuration utility....
View 1 RepliesI am using Flash Media server 4.5 and i read the tutorial if i want to stream the live feed, i may need to use the media live encoder.
but what i found in media encoder is i have to manually setup everything and it only support camera devices. But in my case i have multiple video files keep received from another program and place it on file system (server),my goal is use the Flash Media server to perform a live boardcasting with these video file one by one. That means when client watching a live streaming, they will not notice the server is playing mov1, then mov2, then mov3, then mov4... and so on.
You can imagine i am trying to boardcast a live footage say for 60sec, but the video file will not recorded entirely after 60sec, instead for every 10sec i will save a new video file, so that when client watching the live by HLS [URL]when the time reach to 10sec, a mov1 video file available and FMS should boardcast this video on live123.when the time reach to 20sec, a mov2 video file available and FMS should Immediately follow the mov1 boardcast on live123.and so on...Also can FMS dynamically create a new streaming session (invoke by code), so that when client A uploading some video files to the server, the FMS open a new streaming session only stream cilent A video files?the configuration to boardcasting like screen size, bit rate, etc should be pre-defined on the server. [URL]
Is it possible to capture/encode a video file on a slow machine, then upload it live to a Red5 or Adobe Streaming server, and have that server stream to file live to flash clients? If so, what protocol is used to stream the data from the encoding machine to the Red5 / Adobe server? I see a lot of things about RTMP, but am I correct that this protocol is used between Streaming Server and Flash client, but not from encoding machine to Streaming Server?
View 1 RepliesI'm trying to send a video stream to a Red5 server using Flex.
My Red5 setup seems to work for remote method invocations and shared objects, but I've yet to succeed in getting video working.
This is the AS3 code that connects to Red5:
# connect to RTMP server
netConnection.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
netConnection.connect("rtmp://localhost/context_name");
# omitted code for waiting for connection success, and setting up shared
[Code].....
As said, note that the Red5 setup works flawlessly for remote method invocations and shared objects, but not for video which is strange.
I'm completely new to Flash and actionscript, so please bare with me. But I'm in a bind, so I thought I'd give this a shot.I'm needing to play a commercial before playing an actual video on my company's website. Once the commercials ends, I'd like for the video to start automatically. Is there an open souce (free) flash player that will let me do this?I've watched a tutorial on how to do so, but when I try to make it work with a player, it never works.
View 1 Repliesclose another live stream B if opening when stream A is closed? Does FMS support this kind of logic?
View 8 RepliesI build a client side application where is only a FLVPlayback2.5 component and a short AS3 script.
[Code]....
My Encoder is setup with three streams: Vid: 500 kbps - Audio: 48 kbpsVid: 800 kbps - Audio: 48 kbpsVid: 1500 kbps - Audio: 48 kbps I start the encoder and everything looks fine in the log. In my browser (Safari or Firefox) I go to my html site and the stream starts after 6-8 sec. But anytime with the lowest bitrate 548 kbps and nothing look like the stream is switching to another bitrate. I tried it with the smil playlist and the result is the same. Only the lowest bitrate is plublished.
[Code]....
I'm having a problem with recording a live webcam stream. The last few seconds of the stream is getting cut off.
The recording is stopped with the following piece of code:
vid.attachCamera(null);
vid.clear();
ns.attachCamera(null);
ns.attachAudio(null);
ns.pause();
What could be causing this? Is the stream cut off too soon? Is the client unable to send buffered data to the server?
I'm trying to stream a HDS live multi-bit stream, it seems to push to the FMS but my player doesn't display the stream.Are these settings and files correct? The documenation is confusing on what and which files need to be edited and/or created.
Encoder settings:
Bit Rate: 150,500,700
FMS URL: rtmp://myserver/livepkgr
Stream: liveevent%i?adbe-live-event?liveevent
FMS 4.5
I see the following directories being created when I start encoding and each directory has a single file with a .stream extension in them. Are these correct? fC:FMS-HOMEapplicationslivepkgrevents\_definst_liveevent1[code].....
Reading "Building the realtime user experience" by Ted Roden, I was wondering how to go further and get some video chat web app up and running without the use of flash.
So, in terms of feasibility:
client-side: how can one access to cam and mic local streams not using flash ?
server-side: are there any existing frameworks or open source servers (something like red5) that focus on this kind of use cases ? If not, what do I need to build my own (lightweight) visio chat server ?
I am trying to encode and stream live video. I have downloaded both the Flash Media Encoder and Flash Media Server. The problem i have now is, i can't able to connect to Flash Media Server. The FMS url is as default: rtmp://localhost/live. Do i have to purchase a FMS url? How do i make sure that my FMS is running/ activated?
View 1 RepliesOne server - is streaming server with Flash Media Interactive Server 3.5that host the application with asc files in FMS application directory.Second server - is the IIS web server that host thehtml,aspx,swf etc.. files.So basically i heve swf file on one server that have to connect to live streaming via rtmp on different server with different ip address.I did not find any clear explanation on this crossdomain rmtp issue.ys only HTTP can use crossdomain.xml policy filebut not rmtp.So what policy security procedure need to be done in order to enableswf file hosted on one server to connect and show rmtp live cam broadcasting from another server?
View 2 RepliesI want to make sure that only authenticated users are publishing streams to my Adobe Flash Media Server.
Ideally I would like to limit the IPs which are allowed to publish streams to the server.
I read about the Adobe Authentication Plugin, but apparently it is broken since it works only for Adobe Flash Media Live Enconder. It doesn't secure the server for other encoders that publish streams.
I've got:- FMS already installed on a XP server with IIS- FLV Videos residing in a folder on another serverHow do I:Stream videos from the other server where the videos reside?
View 4 Repliesinsert captions into a live flash video stream.[URL]this example uses a Flash client app wich can invoke something like video_nc.call("sendDataEvent",null,inputfield_txt.text);How can do this without any Flash client/environment ? (I of course still use an FMS 3.5) I would like to use a python (or php...whatever) piece of code to extract caption from VBI in the incoming video stream and insert it in the flash stream.
View 3 RepliesI know the stream can only be modified at publishing side by previous posts. I was thinking of using Server shared objects, but it's not supported by lite.
View 2 RepliesI have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 RepliesSomebody I know can't watch because they have a proxy server.The nc.connect() call to get the live stream fails because it goes direct from AS3 to FMS and doesn't go through the proxy server.
View 1 RepliesI use FMIE and FMLE.how can i do save to file Live Streaming in server installed fms, not local system ?
View 1 RepliesMy rtmp client connects to the server ok and rtmp data flowing ok for about 4hours, in the wireshark trace I can see that the server just stops sending data roughly after 4hours. The server version is 3.5.1, and I also try it on a 4.0 server the data stops coming from the server as well after 5+hours. There are no errors or any indication of session disconneciton in the diagnostic logs. I have also looked thru the settings in applicaiton.xml and server.xml I just don't see any obviious reason for the issue. I do send rtmp Acknowledgement to server after the client receives "window size" bytes, and the client sends ping response to server.
View 1 RepliesWe purchased Flash Media Streaming Server Interactive edition in order to have the security featuers of not allowing unauthorized connections streaming live content to the server. Is there a document with procedures that details how to make this happen, the allowedHTMLdomains.txt does not work when you place in IP ranges that you do not want connecting. I need some help just to figure out a way to keep someoen from connecting to the server and not streaming live content. Has anyone configured this in Linux because the documentation is mainly for Windows. Any help/advice would be great since this seems to be a common problem for anyone who runs Linux.
View 10 Replieswhen i try to live stream with FMS! I can stream video with Flash media live encoder to the server but when i create the player to recieve the livestream from server,i can not recieve the live stream,can anyone give me a step by step tutorial of how to do it?
View 1 RepliesI Need to Broadcast 20,000 to 40,000 Live Streams.! (Bitrate : 128Kbps / Viewers Per Stream Apprx-10 Server : Adobe FMS Server Amazon EC2 Instance - Bandwidth Apprx 100mbps)My Question is1. How Many Concurrent connections Possible for one Adobe FMS Server? (Amazon EC2 Instance)2. is this possible to use RTMFP for this process? (20,000 Connections Via Amazon Adobe FMS Server EC2 Instance )3. if Possible Over RTMFP then How Many Developer Keys Need for this Operation. (or) Pricing Details for the Developer Key. (or) Any Separate Key[s] Available For Amazon EC2 Instance?
View 1 RepliesI'd like to push a prerecorded flv as live stream to another server, from wich clients can receive the video as live stream.
[Code]....
monitorStream.flv lies on my FMS. So from the debug-output everything looks fine. But i don´t see any video, when i play the published stream on client-side. The outgoing stream itself is correctly published.
I'm very new to FMS and I have been experimenting around with it as a part of my job. I already have the encoder, FMS, and my AIR application all talking, so that portion is going well.The problem that I want to tackle next though is to have the FMS server record the live stream to it's hard drive. All of the guides that I've found talk about how to make a DVR stream, but that's not what I want. I want to be able to have the live stream, and then separately I would like to have it recorded.
View 1 Repliesnormal I stream a livestream from Fme to a Fms and than to 2 cdn´s like justinTv. Now I´ve got the problem that i want to change the Script that it streams Viedos to the CDNs. Thats the Script I use right now to push the livestream:
var nc1=null;
var nc2=null;
var ns1=null;
[Code]....
I have FMS installed on windows server 2008. I have a large number of videos which are served to my clients using rtmp protocol.Now we have designed a new player with some controls which apparently do not work while an rtmp video is playing.
View 2 Replies