Somebody I know can't watch because they have a proxy server.The nc.connect() call to get the live stream fails because it goes direct from AS3 to FMS and doesn't go through the proxy server.
View 1 RepliesAre there any way that Flash Media Server isn't able to pass metadata of F4V file into the stream (RTMP) if F4V file was encrypted with Flash Access?
View 1 RepliesI'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
i have a small LAN of about 8 computers all of which are running windows 7. I have installed FMS and XAMPP webserver on one of the machines. I want to stream live from one PC to all the other PCs on the LAN. I have a webpage with jwplayer embedded in it on my XAMPP webserver that is able to see the live stream when i start it locally. I mean the live stream works fine on the machine with the servers on it. But when i want to view the live stream from another machine in the LAN by accessing the webpage that has the jwpalyer from another machine, The jwplayer returns "server not found:rtmp://192.168.10.1/live" error. I was thinking that maybe a firewall is blocking the 1935 port but i have turned off the firewall of every PC on the LAN. I have unistalled any antivirus program on all the PCs. But i still get the same error when i try to access the live stream from another PC on the LAN.When i run netstat -a -n|find ":1935" i get 192.168.10.2:49184 192.168.10.1:1935 SYN_SENT and i think the request for the stream is sent but the conection is rejected.
This is the code for the webpage with jwplayer embedded in it. maybe it:
<html>head> <title>JW FLV Media Player</title> <script type="text/JavaScript" src="swfobject.js"></script>
[code].....
One server - is streaming server with Flash Media Interactive Server 3.5that host the application with asc files in FMS application directory.Second server - is the IIS web server that host thehtml,aspx,swf etc.. files.So basically i heve swf file on one server that have to connect to live streaming via rtmp on different server with different ip address.I did not find any clear explanation on this crossdomain rmtp issue.ys only HTTP can use crossdomain.xml policy filebut not rmtp.So what policy security procedure need to be done in order to enableswf file hosted on one server to connect and show rmtp live cam broadcasting from another server?
View 2 RepliesI have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 Replieswhen i try to live stream with FMS! I can stream video with Flash media live encoder to the server but when i create the player to recieve the livestream from server,i can not recieve the live stream,can anyone give me a step by step tutorial of how to do it?
View 1 RepliesI use FMIE and FMLE.how can i do save to file Live Streaming in server installed fms, not local system ?
View 1 RepliesMy rtmp client connects to the server ok and rtmp data flowing ok for about 4hours, in the wireshark trace I can see that the server just stops sending data roughly after 4hours. The server version is 3.5.1, and I also try it on a 4.0 server the data stops coming from the server as well after 5+hours. There are no errors or any indication of session disconneciton in the diagnostic logs. I have also looked thru the settings in applicaiton.xml and server.xml I just don't see any obviious reason for the issue. I do send rtmp Acknowledgement to server after the client receives "window size" bytes, and the client sends ping response to server.
View 1 RepliesWe purchased Flash Media Streaming Server Interactive edition in order to have the security featuers of not allowing unauthorized connections streaming live content to the server. Is there a document with procedures that details how to make this happen, the allowedHTMLdomains.txt does not work when you place in IP ranges that you do not want connecting. I need some help just to figure out a way to keep someoen from connecting to the server and not streaming live content. Has anyone configured this in Linux because the documentation is mainly for Windows. Any help/advice would be great since this seems to be a common problem for anyone who runs Linux.
View 10 RepliesI Need to Broadcast 20,000 to 40,000 Live Streams.! (Bitrate : 128Kbps / Viewers Per Stream Apprx-10 Server : Adobe FMS Server Amazon EC2 Instance - Bandwidth Apprx 100mbps)My Question is1. How Many Concurrent connections Possible for one Adobe FMS Server? (Amazon EC2 Instance)2. is this possible to use RTMFP for this process? (20,000 Connections Via Amazon Adobe FMS Server EC2 Instance )3. if Possible Over RTMFP then How Many Developer Keys Need for this Operation. (or) Pricing Details for the Developer Key. (or) Any Separate Key[s] Available For Amazon EC2 Instance?
View 1 RepliesI'd like to push a prerecorded flv as live stream to another server, from wich clients can receive the video as live stream.
[Code]....
monitorStream.flv lies on my FMS. So from the debug-output everything looks fine. But i donīt see any video, when i play the published stream on client-side. The outgoing stream itself is correctly published.
i re-stream one rtmp from server1 to 5 or more FMS servers, and make sure they are always connected if they lose connection for some reason it should keep trying to connect back.Please note i'm not a coder. I need simple example of how i can do this without hiring someone to do so.
View 3 RepliesI'm new to Adobe Flash and I'm just trying out the Flashe Media Server 4.5 to stream live video on a local machine. I'm using a FLME 3.2 to capture the video from my digital camera, which works fine, and I can connect to the server with no worries as well. But I have issues streaming the content in the Sample Video Player that comes with the server.
[Code]....
I've also tried playing some sample videos on it. it even refuses to play those. What could be the problem??
I have some questions regarding 4.5 and deciding which version we must license (FMIS or FMS). Obviously there is a huge price difference and as this is within a local network we don't require encryption or multicast. Here is the scenerio we need to stream live DVR to mac, windows browser AND iPhone/iPad and devices running Android 2.2(Froyo)+. I need someone from Adobe to help us decide.
1. I see DVR is now listed as a feature in Flash media server page. Does that mean its no longer exclusive to Flash Media Interactive server. For both http streaming and RTMP?
2. Previously in order to stream live to Adobe dynamic streaming, Flash media interactive server was required because a live segmenter had to be used. Is this still the case? Or can we just launch adobe live media encoder (FLME) and stream to flash media server.3. Related to #2 can we switch between serving streams via RTMP or dynamic streaming without changing the format of the material on disk?4.I was at a webcast for 4.x and remember being told that the latency for http live dynamic streaming was 20 seconds because of the repackaging that had to take place. Is this still true? What is the latency for iOS playback from ingest to playback?5. For the iOS playback feature do the streams have to be in Adobe dynamic streaming format or can we just stream via FLME RTMP and trust it to do the right thing?6. Does the iOS playback support DVR?7. Does the Android plugin have good support for RTMP live streaming including DVR?
Can I stream/publish all methods at the same time?I really want most users to play my live streams via RTMP, however, fail over to HLS for Apple iOS.
View 6 Repliesclose another live stream B if opening when stream A is closed? Does FMS support this kind of logic?
View 8 RepliesMy question is regarding the use of RTMP files (delivered via a Flash Media Server) and Papervision; specifically using an RTMP stream as a texture on a Papervision object. I've already developed a number of successful methods for applying progressive flv/f4v files to Papervision objects. The RTMP streams, however, have presented a number of obstacles.
I will bypass the myriad of research I've done looking into this issue and say that others have inquired about this as well - but from what I can tell, no solid answer or solution has been found - especially under Flash Player 10. So, here's what we have so far:
1. A Flash Media Server running on a University server.
2. A Papervision project
[Code]...
I build a client side application where is only a FLVPlayback2.5 component and a short AS3 script.
[Code]....
My Encoder is setup with three streams: Vid: 500 kbps - Audio: 48 kbpsVid: 800 kbps - Audio: 48 kbpsVid: 1500 kbps - Audio: 48 kbps I start the encoder and everything looks fine in the log. In my browser (Safari or Firefox) I go to my html site and the stream starts after 6-8 sec. But anytime with the lowest bitrate 548 kbps and nothing look like the stream is switching to another bitrate. I tried it with the smil playlist and the result is the same. Only the lowest bitrate is plublished.
[Code]....
I'm having a problem with recording a live webcam stream. The last few seconds of the stream is getting cut off.
The recording is stopped with the following piece of code:
vid.attachCamera(null);
vid.clear();
ns.attachCamera(null);
ns.attachAudio(null);
ns.pause();
What could be causing this? Is the stream cut off too soon? Is the client unable to send buffered data to the server?
I'm trying to stream a HDS live multi-bit stream, it seems to push to the FMS but my player doesn't display the stream.Are these settings and files correct? The documenation is confusing on what and which files need to be edited and/or created.
Encoder settings:
Bit Rate: 150,500,700
FMS URL: rtmp://myserver/livepkgr
Stream: liveevent%i?adbe-live-event?liveevent
FMS 4.5
I see the following directories being created when I start encoding and each directory has a single file with a .stream extension in them. Are these correct? fC:FMS-HOMEapplicationslivepkgrevents\_definst_liveevent1[code].....
Has there been any further discussion regarding restricting who can stream to FMSS (not FMIS or the development version).
I found this article, but I don't know if this was ever fully resolved:
[URL]
I don't want just anyone to connect to my server to stream live. I want to restrict by IP address, authentication, or any other means.
'URL missing from Media tag' on FMS4.5 HTTP Live Stream playback.I have spent a whole day trying in vain to publish f4m live http streams from FMLE using FMS 4.5, and almost everything I try results in the error .The F4M document contains errors URL missing from Media tag...in both Flash Media Playback and the fms videoPlayer app.Other people seem to have seen this and solved it, but I've found nothing that helps. I have tried to publish a single stream, and with multiple bitrates. For the latter, I followed the Adobe video tutorial as follows:
Multiple bitrate live
================
I'm publishing 3 streams from FMLE, using
FMS URL: rtmp://[serveraddress]/livepkgr[code]..........
I have a HD Camera streaming a live feed through FME 2.5 to FMS 3.0 using the VP6 codec and it works fine. I have now been trying to get the same stream running via H.264 and althogh FME 2.5 connects to the FMS 3.0 server and the stream starts with FMS 3.0 reporting the stream no problem. The Client application crerated with Captivate 3 using Flash Player 9 for publishing no longer dispays the video. Switching back to VP6 works again.
View 4 RepliesI'm running the Interactive Flash server 3 and I'm wondering is there a way to give people a user & password to limit who can live stream into the server.I can do this with the Real server and Windows media fairly easily but having problems figuring out how to on the flash server.Currently if you have the Servers IP and the flash encoder you can stream with no Username or password required. I would like to restrict this.
View 3 Repliesi have an urgent question for the following purpose. We plan to develope a solution consisting of a sender software for streaming live video to the streaming server. Now more than one client should be able to connect to the stream of the server. Because the different clients are connected with different bandwidth rates the server should be able to convert the video stream (e.g. the video width and height, framerate and quality) on the fly. Maybe a client with a better connection than DSL should get the video in a resolution
of 640x480, a DSL client should get the video in 352x288 and a client with ISDN in 176x144.
Is there a possibility to do this with the FMS server on the server with server-side ActionScript? Or can I limit the requested stream size on the client side? Or anything I can do?
i need to stream a live TV Online. I have a computer with windows server 2003 and i wiil instal the adobe flash media server. I need to understand whow i can do this. I am a bigginer, what is the steps for i build a flash media server.
View 2 RepliesMy fmis server is 3.5.4 and I use flvPlayback to play the fms live stream.
I want to let the live stream stopping status after be load completed.but after I set the autoPlay=false, the fms live stream is not stopping status after be load completed.
However I try the fms vod stream as the autoPlay=false ,is can stop .
what's different the live stream and vod stream. why the vod stream can stop but live stram can't stop?
Is there anyone who has a HTML example (or can give an URL with a page) that has the Adobe Flash player displaying a live stream (and not a file)?There is one in the installation under "Flash Media Server Start Screen" but it was too complex for me to understand. I just need a simple example on how to display a live flash stream in Adobes own web player.
View 1 RepliesI just upgraded to FMS 4.5. I'm able to stream live event via HDS but I can't stream live events via HLS. I can use VOD via HLS but not live events. I tried access the HLS url directly on my iphone and even tried embeddeding the <video> tags in a HTML file and get the same results. What I did notice is that in my application folder on the server I only see the HDS files being created. I do not see the .ts files that I beleive are supposed to be created when streaming to HLS devices.
View 7 Replies