Media Server :: Using An RTMP Stream As A Texture On A Papervision Object
Jul 16, 2009
My question is regarding the use of RTMP files (delivered via a Flash Media Server) and Papervision; specifically using an RTMP stream as a texture on a Papervision object. I've already developed a number of successful methods for applying progressive flv/f4v files to Papervision objects. The RTMP streams, however, have presented a number of obstacles.
I will bypass the myriad of research I've done looking into this issue and say that others have inquired about this as well - but from what I can tell, no solid answer or solution has been found - especially under Flash Player 10. So, here's what we have so far:
1. A Flash Media Server running on a University server.
2. A Papervision project
[Code]...
View 1 Replies
Similar Posts:
Jan 13, 2011
i re-stream one rtmp from server1 to 5 or more FMS servers, and make sure they are always connected if they lose connection for some reason it should keep trying to connect back.Please note i'm not a coder. I need simple example of how i can do this without hiring someone to do so.
View 3 Replies
Mar 4, 2011
Somebody I know can't watch because they have a proxy server.The nc.connect() call to get the live stream fails because it goes direct from AS3 to FMS and doesn't go through the proxy server.
View 1 Replies
Sep 21, 2011
Can I stream/publish all methods at the same time?I really want most users to play my live streams via RTMP, however, fail over to HLS for Apple iOS.
View 6 Replies
Apr 18, 2011
Are there any way that Flash Media Server isn't able to pass metadata of F4V file into the stream (RTMP) if F4V file was encrypted with Flash Access?
View 1 Replies
Jul 22, 2010
I'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
View 12 Replies
Feb 3, 2010
I'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
View 30 Replies
Apr 4, 2011
I'm trying to append a live stream to an existing file, but I cant figure out how to open the existing file and then append the live stream. This is server side as well.I know I need to open the existing file using stream = stream.get("file"). but I don't understand how to associate stream with the live stream coming in.
View 8 Replies
Jan 14, 2011
We had FMS2 installed before and the paths to all our videos are like rtmp://ServerName/sites/.... (the default path on FMS2) Now we upgrade to FMS4 and we would like to keep these paths the same because we have many HTMLs that reference these videos. However, the default path on FMS4 is rtmp://ServerName/vod/... Is there a way to change "vod" to "sites"?
I tried to change VOD_COMMON_DIR in fms.ini from /install_dir/webroot/vod to /install_dir/webroot/sites, and also changed the document root in httpd.conf, but rtmp://ServerName/sites/ is still not working.
View 5 Replies
Jun 29, 2010
i have a small LAN of about 8 computers all of which are running windows 7. I have installed FMS and XAMPP webserver on one of the machines. I want to stream live from one PC to all the other PCs on the LAN. I have a webpage with jwplayer embedded in it on my XAMPP webserver that is able to see the live stream when i start it locally. I mean the live stream works fine on the machine with the servers on it. But when i want to view the live stream from another machine in the LAN by accessing the webpage that has the jwpalyer from another machine, The jwplayer returns "server not found:rtmp://192.168.10.1/live" error. I was thinking that maybe a firewall is blocking the 1935 port but i have turned off the firewall of every PC on the LAN. I have unistalled any antivirus program on all the PCs. But i still get the same error when i try to access the live stream from another PC on the LAN.When i run netstat -a -n|find ":1935" i get 192.168.10.2:49184 192.168.10.1:1935 SYN_SENT and i think the request for the stream is sent but the conection is rejected.
This is the code for the webpage with jwplayer embedded in it. maybe it:
<html>head> <title>JW FLV Media Player</title> <script type="text/JavaScript" src="swfobject.js"></script>
[code].....
View 3 Replies
Jan 8, 2010
i am new on steaming & flash server; when we try to use RTMP over HTTP the outside client gets the internal IP address of the FMS server instead of the NAT one or public IP address, how can we solve this.
View 1 Replies
Aug 23, 2010
I have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 Replies
Jul 19, 2011
when i try to live stream with FMS! I can stream video with Flash media live encoder to the server but when i create the player to recieve the livestream from server,i can not recieve the live stream,can anyone give me a step by step tutorial of how to do it?
View 1 Replies
Sep 16, 2011
I was previously using FMS 3.5 to record from flash media live encoder using the DVR app. This worked well as I was able to seek into a live stream, all of it not just a window, and I was using RTMP for playback (not HTTP).
Now I would like to upgrade to 4.5, and keep using RTMP for DVR BUT add support for iOS. So my question is, is this possible? I've looked over the documentation many times and cannot figure it out. I see livepackager and that appears to support HLS but it also requires using adobe dynamic http streaming and it says nothing about true DVR (yes actually recording it).
So is the dvr app now obsolete, and if not how can I add iPhone support to it? I already have a custom player and really hope I don't need to rewrite it to use adobe http dynamic streaming just for this.
View 7 Replies
Aug 28, 2010
close another live stream B if opening when stream A is closed? Does FMS support this kind of logic?
View 8 Replies
Oct 8, 2010
Only just getting started on this whole domain of learning, so go easy!If I set up a P2P video/audio chat (similar to the sample VideoPhone thing on the Cirrus site), can I get the stream from both parties to send to a server at the same time so that I can record it? If so, would I have to use a FMS to stream it to and perform the recording (and if so which version could I get away with)? Are there any (preferably free, or just tutorialised) solutions for the recording side of things?
Currently it seems like the only option for doing the P2P thing is to use Stratus/Cirrus unless I use FMS4 Enterprise.
how effective this kind of situation can be, in terms of quality of the stream and recording? Does any of this make sense?
View 1 Replies
Jul 26, 2010
I've had FMS running on my local machine for a while and have had a little experience writing FMS apps, but I've just tried recording audio for the first time using the standard vod application and I keep getting a "Write access denied for stream" error. My AS3 code is copied and pasted for various examples and am confident that it works.
I'm running Windows XP service pack 3 & FMIS 3.5.
I've had a look at the vod/media directory and under windows->properties the read-only attribute is ticked. Every time I un-tick this it reverts back to being ticked. I've googled this and MS say that most programs ignore the read-only attribute and that it only really applied to files. I've also tried the MS fix for setting the read-only attribute via cmd and still no joy (doesn't fix read-only attribute or FMS recording the audio after setting via cmd).
I've also tried our dev server install of FMS (running under linux) and am getting the same results.
Here's my AS3 code...
private function initApp(event:Event):void
{
removeEventListener(Event.ADDED_TO_STAGE,initApp);
[Code].....
View 1 Replies
May 9, 2011
i test the fms 4 update 1 rtmfp streams multicast after 10 minutes i get this message RTMFP Multicast stream has exceeded max duration allowed; closing stream. but i do not use IP multicast
[Code]...
View 3 Replies
Oct 12, 2009
I am trying to encode and stream live video. I have downloaded both the Flash Media Encoder and Flash Media Server. To complete the process of streaming video, it appears that I need to obtain a "flash media server URL address" which is called "RTMP" on the encoder page. Where can I find this? Is this something that can be downloaded, or do I have to purchase this from a partner like Level 3 communications, AT&T, etc.?
View 1 Replies
Mar 9, 2010
I build a client side application where is only a FLVPlayback2.5 component and a short AS3 script.
[Code]....
My Encoder is setup with three streams: Vid: 500 kbps - Audio: 48 kbpsVid: 800 kbps - Audio: 48 kbpsVid: 1500 kbps - Audio: 48 kbps I start the encoder and everything looks fine in the log. In my browser (Safari or Firefox) I go to my html site and the stream starts after 6-8 sec. But anytime with the lowest bitrate 548 kbps and nothing look like the stream is switching to another bitrate. I tried it with the smil playlist and the result is the same. Only the lowest bitrate is plublished.
[Code]....
View 3 Replies
May 24, 2010
I have recently installed FMIS 3.5.3. In checking the access logs I find data in both logs that display the same stream stop and stream play time .I'm not sure why the time is the same (00:19:27 example below). Videos play fine when testing from work (T3 connection). However, occasionally a very slight hesitation when playing video from home (I have cable connection). [code]...
View 4 Replies
Aug 27, 2010
I'm having a problem with recording a live webcam stream. The last few seconds of the stream is getting cut off.
The recording is stopped with the following piece of code:
vid.attachCamera(null);
vid.clear();
ns.attachCamera(null);
ns.attachAudio(null);
ns.pause();
What could be causing this? Is the stream cut off too soon? Is the client unable to send buffered data to the server?
View 2 Replies
Mar 10, 2011
Is there a way to disable RTMP on the server and allow only rtmpe client ?
View 1 Replies
Sep 18, 2009
i am having a serious issue with finding my RTMP address which may be something very simple to you all out there, i just installed Flash Media Server 3.5 at C:Program Files....i have purchased a video flash chat program and it needs to know the rtmp address which im not sure. I named the Flash Server EazyFlash.....not sure if i should install flash server somewhere else on server so website can see it??? The flash console and sample videos are working great but its all C: Drive??? would it be RTMP://EazyFlash? The software came with flash application which was a folder called videoflashchat which i copied to applications folder.
View 6 Replies
Aug 4, 2010
For long i been using wowza server, recently i change my platform to FMIS, I want to know how to restream a RTMP url
in wowza
1. i create a folder name edge on application folder and conf folder.
2. i have a folder name content, i just have to create a myStream.stream file
3. then paste my rtmp://remote-ip/live/stream link to myStream.stream file.
then i can play the file rtmp://wowza-ip/edge/myStream.stream in any rtmp player.how can i do such a thing on adobe FMIS.
View 6 Replies
Sep 21, 2011
I've freshly installed the FSM 4 on windows7, but the start screen no runnng the rtmp video and the administration console no conecting, why?
my firewalls is down and my ports is open like adobe say... why no workig RTMP and my administration console no working?
View 2 Replies
Dec 12, 2011
I'm trying to stream a HDS live multi-bit stream, it seems to push to the FMS but my player doesn't display the stream.Are these settings and files correct? The documenation is confusing on what and which files need to be edited and/or created.
Encoder settings:
Bit Rate: 150,500,700
FMS URL: rtmp://myserver/livepkgr
Stream: liveevent%i?adbe-live-event?liveevent
FMS 4.5
I see the following directories being created when I start encoding and each directory has a single file with a .stream extension in them. Are these correct? fC:FMS-HOMEapplicationslivepkgrevents\_definst_liveevent1[code].....
View 2 Replies
Jan 27, 2012
Anyone know about progress bar in rtmp i m making player using rtmp protocol because it allow to seek in any position even if the video data is not cache but i did not solve this issue how to display progress bar data is loaded i can do this in http protocol using Netstream.bytesLoaded and Netstream.bytesTotal i know rtmp is streaming video but i just want to know the when we pause in youtube u can see bufferlength in light gray which indicate this much of video cache i want to does they rtmp protocol or something else.
View 3 Replies
Feb 25, 2012
Currently, we are streaming using RTMP, but I want to switch to HLS to allow iOS devices to stream our video. I do not want to encode two separate streams though because we are operating with limited bandwidth on mobile data cards. If I stream using the livepkgr, the delay to iOS devices is about 12 seconds which is OK. However, on desktop clients, we have live scoring integrated with our video, so we cannot have a delay that long. My question is, if I connect to the same stream in a Flash client for the desktop, will the delay still be that long? Or will it stream in real time to flash clients with the delay only for iOS devices using HLS? Also, am I correct in assuming that I can do this on 1 stream, or do I need to setup a separate stream for RTMP and HLS?
View 1 Replies
Mar 19, 2012
I need to configure FMS server so that it will listen to only RTMP request and disable other services like HDS and PLD. What configuration is required for this arrangement?
View 1 Replies
