Flash :: Media Server - Send Video And Audio Data To A Media Server By Using RTMP Protocol
Jul 22, 2010
I'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
View 12 Replies
Similar Posts:
Jan 27, 2012
Anyone know about progress bar in rtmp i m making player using rtmp protocol because it allow to seek in any position even if the video data is not cache but i did not solve this issue how to display progress bar data is loaded i can do this in http protocol using Netstream.bytesLoaded and Netstream.bytesTotal i know rtmp is streaming video but i just want to know the when we pause in youtube u can see bufferlength in light gray which indicate this much of video cache i want to does they rtmp protocol or something else.
View 3 Replies
Feb 15, 2011
I am developing Video Chat over Ip (including audio and text too). But I am unable to get the proper startup material for my desktop application.
View 2 Replies
May 25, 2009
As titled, what is the way to record video/audio files using Flash Meida Server through rmtp, and allow users to access the recorded files through http?What I am trying to do, is to record a user's microphone's input and save it to the server.fterwards, I would like other users to be able to access the recorded files and mainuplating the audio data, by computeSpectrum(), to do some visualization of the audio. As I know computeSpectrum() cannot work on streaming files, so I think I need to access the recorded files using http instead of rmtp. Is that true?
View 1 Replies
Feb 3, 2010
I'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
View 30 Replies
Sep 20, 2011
Am developing an application with Flex 4.5 & Flash Media Server. I need a visualization curresponding to the plaing track . It is possible with SoundMixer.computeSpectrum(bytes, true, 0) in case of progressive downloading. But not working with rtmp streaming. And also need audio wave curresponding to the track which is also working with progressive ownloading usinf Sound object.
View 1 Replies
Aug 5, 2011
video media player that supports rtmp protocol and has no branding? Maybe an open source general license? Simply to play flv files on a web page.
View 1 Replies
Sep 23, 2011
is it possible fast forward, rewind video in flash media server through flash action script ?
View 5 Replies
Oct 12, 2009
I am trying to encode and stream live video. I have downloaded both the Flash Media Encoder and Flash Media Server. To complete the process of streaming video, it appears that I need to obtain a "flash media server URL address" which is called "RTMP" on the encoder page. Where can I find this? Is this something that can be downloaded, or do I have to purchase this from a partner like Level 3 communications, AT&T, etc.?
View 1 Replies
Jul 19, 2011
when i try to live stream with FMS! I can stream video with Flash media live encoder to the server but when i create the player to recieve the livestream from server,i can not recieve the live stream,can anyone give me a step by step tutorial of how to do it?
View 1 Replies
Aug 6, 2009
I'm setting up my fmis to deliver video through rtmp and http.I'm on a locked down network.What ports need to be open to allow people outside of the network to access the rtmp/http streams? I am correct to say only port 80 and 1935?
View 1 Replies
Nov 22, 2010
I am developing an application in Flash that runs locally and it uses FMS 4.01, locally. I have been using adobe FMS 4.01 for months with no problem. Today I cannot connect to my server and I cannot even play the sample video on the Flash Media Server Start Screen. The sample video for the http plays after I changed the permissions for flash, but rtmp does not play. I have reinstalled the server; 3.5, 4.0 and 4.01, none of them will connect to rtmp. I receive this error on the flash media server start screen that says "the connection timed out".
View 1 Replies
Dec 12, 2010
is it possible to built a Video Chat without the need for server side code so that I can run it on a Flash Media Streaming Server?
View 7 Replies
Feb 16, 2011
Flash media server 3.5 to stream live video to a webpage with flex GUI embedded in it.For this I have used Adobe flash media server start screen .I could able to stream video correctly.I want to know how long it could be do like this.ie suppose I have to stream like this for 3 or 6 months
View 2 Replies
Nov 9, 2011
what will be the best way for video conference without any delay for multiple users(200-300). How it can be possible with FMS and Flex?
View 3 Replies
Aug 1, 2010
will i be able to send a video what i'am receiving form fms B to another fms A in a flash app?And how?
View 4 Replies
Jun 9, 2010
today I install fms3.5 on my pc.
1)I can use rtmp://localhost/vod/mp4:sample2_1000kbps.f4v , it works ok. But when I use rtmp://192.168.8.3/vod/mp4:sample2_1000kbps.f4v, I got Netconnect.connection.rejected. 192.168.8.3 is my fms server IP.
2)When I set fms use port 1935 and 80, rtmp://192.168.8.3/vod/mp4:sample2_1000kbps.f4v works ok on other pc. But using wireshark(Wireshark is a network protocol analyzer for Unix and Windows.) I found , the flash player connect 1935 port at first, it send "connect",the server replay "connection.rejected" and "no scope "vod" on this server". Than it connect to 80 port, so I see the video is not send throw 1935 port with rtmp, but throw 80 port with rtmpt. Why? How can I see video throw rtmp?
View 9 Replies
Sep 22, 2010
We have one functionality in which one user can communicate with the other user at the same time through flash media server3.5. In this fucnitonality we are catching stream from both end through camera and pass it to flash media server. On FMS side this streams gets stored also we are displaying those recorded flv files side by side to the corresponding user so that they can communicate with each other. In this situation we are facing a video and audio latency upto 1.5 to 2 sec.
View 2 Replies
Apr 8, 2011
Same file streamed from FMS4 (same on 3.5) with rtmp protocol has very poor quality compared to real file quality. Is there some low level configuration to do on Flash Server? Is the streaming server making some kind of transcoding before sending the stream? Or it can be Flash Player? Tried unchecking "hardware acceleration" but nothing changes. I am on a local gigabit network, so no network bottlenecks. Video seems very pixelated on the edges (not soft/antialiased). These are the file details:
[CODE]....
View 4 Replies
Aug 21, 2006
Task is to take online interviews and record them for lather reviewing. I m new to media server and video streaming.
View 3 Replies
Sep 12, 2010
I had FMS 3.5 developer package installed on my server installed about a month ago. I used to be able to go to the /webroot/ page to see the sample RTMP video play and it worked great. Today, I go to view that page and find that it no longer plays. I get "Connection Error. Please preee Play to try again."
Pressing the play button does nothing, so I click the RTMP thumbnail and it reloads ony to give me that same error again. I can click the HTTP thumbnail and see the video play just fine. But, I want RTMP and after over an hour on the phone with my managed hosting tech, we can't find anything wrong.
Here's the thing: I haven't done anything, I have not changed anything, I have not manipulated the server software whatsoever. It just stopped working and gives me "Connection Error."
[Code]...
View 6 Replies
Jun 3, 2011
For a client, I am working on a project where a live RTMP stream is published to an Adobe FMS 3.5.6 server from a java application, using Red5 0.9.1 RTMPClient code. This works fine, until the timestamp becomes higher than 0xFFFFFF after 4.6 hours, and the RTMP extended timestamp field starts being used. I have already found: when the extended timestamp was written after the header, the last 4 bytes of the data were being cut off. I have fixed this locally, and now the data being sent seems to me to be conformant to the spec. However, FMS still throws an error message in the core log and then kills the connection from the Red5 client. Here is the error message:
[Code]..
View 6 Replies
Aug 25, 2009
I ran a simple live video streaming application for the first time with actual users and ran into a couple of serious performance issues that had not turned up during testing. In this instance there was one video stream from a live web cam and used FMLE at 150 kbps using VP6 and MP3 @22k. There were 16 clients and everything worked pretty good for about 30 minutes. (although some clients said their audio and video were out of sync by up to 3 seconds)
Then individual clients would have either the video freeze or the video would continue and the audio would stop. These clints had to "disconnect" and then "connect" again to the application. This happened to all of the clients at one time or another for several minutes. I stopped and restarted the FMLE with progessively lower bandwidth settings down to 75 kbps but still clients were having the same issue.
I eventually stopped the FMLE and used the applications built in publisher at 45 kbps and that seemed to eliminate the freeze/dropping issue. But of course the video quality was very poor and some clients still reported that the audio was out of sync with the video. The server hosting the FMS application is a quad processor dell with lots of memory and network connectivity. The Flash Media Admin Console performance graph showed the total Bandwidth as 3 Mbps at maximum.
View 8 Replies
Mar 30, 2010
I want to have a website where users can record short video clips (using a webcam) and then have those videos saved on the FMS for viewing later. I've seen a lot about streaming video, but I actually want to save the video.
View 1 Replies
Jun 29, 2010
i have a small LAN of about 8 computers all of which are running windows 7. I have installed FMS and XAMPP webserver on one of the machines. I want to stream live from one PC to all the other PCs on the LAN. I have a webpage with jwplayer embedded in it on my XAMPP webserver that is able to see the live stream when i start it locally. I mean the live stream works fine on the machine with the servers on it. But when i want to view the live stream from another machine in the LAN by accessing the webpage that has the jwpalyer from another machine, The jwplayer returns "server not found:rtmp://192.168.10.1/live" error. I was thinking that maybe a firewall is blocking the 1935 port but i have turned off the firewall of every PC on the LAN. I have unistalled any antivirus program on all the PCs. But i still get the same error when i try to access the live stream from another PC on the LAN.When i run netstat -a -n|find ":1935" i get 192.168.10.2:49184 192.168.10.1:1935 SYN_SENT and i think the request for the stream is sent but the conection is rejected.
This is the code for the webpage with jwplayer embedded in it. maybe it:
<html>head> <title>JW FLV Media Player</title> <script type="text/JavaScript" src="swfobject.js"></script>
[code].....
View 3 Replies
Mar 4, 2011
Somebody I know can't watch because they have a proxy server.The nc.connect() call to get the live stream fails because it goes direct from AS3 to FMS and doesn't go through the proxy server.
View 1 Replies
Jan 8, 2010
i am new on steaming & flash server; when we try to use RTMP over HTTP the outside client gets the internal IP address of the FMS server instead of the NAT one or public IP address, how can we solve this.
View 1 Replies
Oct 9, 2009
I am working in flash chat in that I need font type,size and color for typed text. how to send the html data from client to server and get back for client.
View 1 Replies
Apr 15, 2009
I want to set the bit rate of audio and video (48,96.128 kbps) at the time of live streaming . i m not using the flash media live encoder because i have to make it as web applicaton. can any one tell me how to set bit rate.
View 1 Replies
Sep 22, 2010
I am attempting to send XML data to a PHP script from my server-side app using the following code:
var my_xml = new XML("<highscore><name>Ernie</name><score>13045</score></highscore>"); my_xml.contentType = "text/xml"; my_xml.send("http://www.server.com/temp/fms_post.php");
I am logging anything that the outside server receives at $_REQUEST, $_POST, $_GET. I can see that my server-side app is reaching out to the external server, but the data is always blank.
View 3 Replies
