I am developing Video Chat over Ip (including audio and text too). But I am unable to get the proper startup material for my desktop application.
View 2 RepliesI've build a live video/audio chat application. All works fine only the issue is latency of 5 secs. I'm using FMS 3.5 and FLEX.
View 1 Repliesis it possible to built a Video Chat without the need for server side code so that I can run it on a Flash Media Streaming Server?
View 7 RepliesI am looking to broadcast live video and need a camera that is better than a simple webcam. It looks like they used to make video cameras that would register as webcams, but stopped making them.If you wanted to broadcast an event live, what would be a good camera to use?
View 5 RepliesI've tested an exciting tutorial about streaming live video with Flash Media Server 3.5..every thing went good and i could see my webcam broadcast from my machine through my web site but unfortunately.I can't see it from any other machine.I'm using Microsoft windows XP SP2and flash media live encoder 3but my web server run UNIX is this a problem?
View 15 RepliesI'm using FMLE 3.1 to stream live video encoded with H.264 format with FMS 3 and Flash player 10 + AS 3 to connect to the stream. When I connect to the stream, just the audio is played. I'm able even to get the metadata information about the video, but I just receive the audio. I already tried some stuff like
1. "Flash 10 won't play live stream H.264 after iTunes install" [URL]. I tested it in a complete different environment than mine, but the same result.
2. I've tried some format to play method, but this is just to play files
ns.play("mp4:saple.f4v"); ns.play("mp4:sample");
3. Also read "How do you watch and record a live h.264" [URL], but I don't get even to play the stream at first place. This is the code I'm using
import flash.media.Video;
var video:Video = new Video(720, 480);
var ncVideo = new NetConnection();
this.ncVideo.addEventListener(NetStatusEvent.NET_STATUS, onNetStatus);
[Code] .....
Another detail is that when I record the video to a file for instance "sample.f4v", I put this video in the FMS but when I connect to this stream I receive the "FileStructureInvalid" error message. I went from changing the extension to .flv [URL] to the solution to flatten the files [URL] but this is not the case because I'm using FMS to stream the recorded video.
I am a Wedding/Events Photographer/VideographerOne of my client want his events be live streamed over internet, I am quiet new for this type of jobas to what Software / Hardware I have to purchase for Live Streaming of Video over Internet.. and how it will encode in realtime.?
View 8 RepliesI have Flash media server, flash media live encoder, and flash cs5.I'm gonna be using flash media live encoder to stream my desktop and webcam to my website. My current host (host gator) doesn't have rtmp enabled on their web hosting plan, only on their dedicated and vps hosting. My question is do I need to switch hosts to one that has rtmp enabled so I can stream to my website for people to view?Also, can I embed this stream into another part of my site?
View 5 RepliesI'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
when i try to live stream with FMS! I can stream video with Flash media live encoder to the server but when i create the player to recieve the livestream from server,i can not recieve the live stream,can anyone give me a step by step tutorial of how to do it?
View 1 RepliesI'm very new to FMS and I have been experimenting around with it as a part of my job. I already have the encoder, FMS, and my AIR application all talking, so that portion is going well.The problem that I want to tackle next though is to have the FMS server record the live stream to it's hard drive. All of the guides that I've found talk about how to make a DVR stream, but that's not what I want. I want to be able to have the live stream, and then separately I would like to have it recorded.
View 1 Replieswe're planning to set up a live streaming service, one operson live streaming a video to multiple users. so no more than one channels contemporary in uplaod, and at the beginning it won't be a open broadcast service (maybe later..) we initially don't know how many can be the users. I've red that there's no theoretically limit for the maximum number of users connected with a fms, is this also valid for live streaming, or has it some limitation due to be live? is it necessary to have our fms, or is it possible (and cheaper) use a server provider?
View 1 RepliesWe have installed FMS on our godaddy server to work with and used live video streaming services. We are having problems with the video quality being choppy, slow and pauses continuously during live broadcast and motion. We can't figure what is wrong; video needs to be flawless and in high quality. The godaddy server is running:
Red Hat Fedora Core 7
Intel Core 2 Duo - 2.13 GHzRAM
2 GB RAM
250 GB Total Disk Space
I am facing below mentioned problem regarding video broadcasting with adobe flash media interactive server (Developers version). I am using DVRCAST for recording video from a webcam and broadcasting the same live. Please find video settings below.
width:320
height:240
fps:15
quality:90
bandwidth:150
buffer time:0.01
Our problem is that videos are not playing smoothly in application. The motion is getting paused and interrupted in time of broadcast live. I downloaded and checked the recorded flv files from server and found the recorded file also has same problem. So this problem is appearing in time of streaming the video from client computer to fms server. This problem is not appearing when I am testing the application in my localhost.
My code for live streaming mentioned below:
private function publishCamera():void {
cam = Camera.getCamera();
cam.setMode(cameraSettings.width,cameraSettings.height,cameraSettings .fps);
cam.setQuality(cameraSettings.bandwidth,0);
cam.setQuality(cameraSettings.bandwidth,cameraSettings.quality);
[Code] .....
We have an application that is using FMS to share slides (swf,jpg, etc) with another client. We added a video as an option. We would like to verify as often as possible the bandwidth quality between communications in order to suggest the user to close video if we notice bandwidth is not optimal.
We've been experimenting doing a bandwidth detection every 60 seconds, but I am wondering if there are specific guidelines to do this for live video, like how many times one should verify bandwidth? Is it ok to take one reading or should we take a few readings and then average out?
i want do live dynamic streaming for FMS. i have refer [URL]. But the sample player show blank.
i using Adobe Flash Media Live Encoder 3.2, Adobe Flash Media interactive Server 3.5.3 and sample file "live_dynstream_dvr.zip".
1. I setting up my FMLE and set FMS url and stream name
2. I monitor connection in fms_console.htm
3. I run DVRController
4. i configure and play the video with livedvr
but my video player is show blank
5. in my fms_console.htm show 3 connection
I ran a simple live video streaming application for the first time with actual users and ran into a couple of serious performance issues that had not turned up during testing. In this instance there was one video stream from a live web cam and used FMLE at 150 kbps using VP6 and MP3 @22k. There were 16 clients and everything worked pretty good for about 30 minutes. (although some clients said their audio and video were out of sync by up to 3 seconds)
Then individual clients would have either the video freeze or the video would continue and the audio would stop. These clints had to "disconnect" and then "connect" again to the application. This happened to all of the clients at one time or another for several minutes. I stopped and restarted the FMLE with progessively lower bandwidth settings down to 75 kbps but still clients were having the same issue.
I eventually stopped the FMLE and used the applications built in publisher at 45 kbps and that seemed to eliminate the freeze/dropping issue. But of course the video quality was very poor and some clients still reported that the audio was out of sync with the video. The server hosting the FMS application is a quad processor dell with lots of memory and network connectivity. The Flash Media Admin Console performance graph showed the total Bandwidth as 3 Mbps at maximum.
Flash media server 3.5 to stream live video to a webpage with flex GUI embedded in it.For this I have used Adobe flash media server start screen .I could able to stream video correctly.I want to know how long it could be do like this.ie suppose I have to stream like this for 3 or 6 months
View 2 RepliesI did a live stream last week using 282,482,832,1500Kbps streams. What would cause the audio to get out of sync with the live video stream? I'm trying to determine if it was bandwidth related, cpu/memory issue on the FMIS 4.5 server, or an issue with encoding PC exceeding it's limits?
View 3 RepliesI have an mp3 player, that I would like to add live streams to.
here is an example url of what I'd like to stream. [URL]
is there a way to do that in flash AS3?
I have this sample code from the e-book: "Learning Flash Media Server 3". The purpose of the code is to create a FLV. The code is not running as it should. When I click on the 'record' button, the label is to change to 'recording', that dosen't seem to happen and also when I click on the 'Stop Record' button, I get the following error:
"TypeError: Error #1009: Cannot access a property or method of a null object reference.at MinRecord/stopRecord()"
[Code]....
My deduction is that the 'if' statement in the 'startRecord' function is not resolving to 'true' and hence the label is not changing to 'Recording'. Also I feel that the assingment to the variable 'ns' of type NetStream is not being done and hence in the function 'stopRecord' I get the above mentioned error message when I click on the stop button. How do I rectify these problems?
I currently have two connections with two separate streams. They both hit the same fms 3.5 server. One connection transfers live audio and video. The other one is used for remote objects. Sometimes when viewing the audio and video stream with a slower internet connection, the stream for the shared objects disconnects. I think it is a bandwidth issue. Is there any way to set the priority of the streams? I think this should allow me to set a higher priority for the shared object connection so it won't disconnect.
View 3 RepliesI have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 RepliesAs titled, what is the way to record video/audio files using Flash Meida Server through rmtp, and allow users to access the recorded files through http?What I am trying to do, is to record a user's microphone's input and save it to the server.fterwards, I would like other users to be able to access the recorded files and mainuplating the audio data, by computeSpectrum(), to do some visualization of the audio. As I know computeSpectrum() cannot work on streaming files, so I think I need to access the recorded files using http instead of rmtp. Is that true?
View 1 RepliesI'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
I have a FMS 4.5 with (License) and is set up and running fine, now I want to stream Live to the IOS Devices but no luck. I have a web page for test purpose with the video src tags to: URL... and in the server I have a livestream.m3u8 pointing to the same URL..., Now the Encoder have the AAC plugin and all the presets like it shut but when I go to see it in my IPad 2 this is how it looks.
View 11 RepliesHow can i connect to my own server to watch my streaming video from another computer?
View 10 RepliesI am testing RTMFP unicast for a video chat project using FM Developer Server 4.0.During the testing I overloaded the upload traffic to make packets dropped rather than suffering delay due to retransmission.
However, I see it makes a significant delay and it looks like doing retransmission just like RTMP.
Do you know if there is an option in FMS to disable the retransmission or other configuration I have to consider?One thing I found is "Netstream.videoReliable=false; Netstream.audioReliable=false;" but it doesn't make any difference.
I have created a video chat application using Flash Media Server, Its working well in Local, But not in FMS (If I connect with my FMS account). But Text Chat working well, pbm in Video only My server is from influxis with Bandwidth 1 mbps, But My application got 13 mb totally, It is any pbm in the server, I'm very newbie to FMS, so excuse my silliest question and explains if its.
View 9 RepliesI would like to develop a small p2p chat using flash media sever 4.0. There are many p2p video chat samples using cirrus. Please help me if you know how to do it with flash media server,not cirrus.
View 1 RepliesI m a begginer with FMS. I have a licenced version of FMS and I want to stream a live video from the Localhost or another machine with camera. And then then I should broadcast it to many clients. I don't know how to begin
View 12 Replies