I have a FMS 4.5 with (License) and is set up and running fine, now I want to stream Live to the IOS Devices but no luck. I have a web page for test purpose with the video src tags to: URL... and in the server I have a livestream.m3u8 pointing to the same URL..., Now the Encoder have the AAC plugin and all the presets like it shut but when I go to see it in my IPad 2 this is how it looks.
View 11 RepliesI am using FMS 4.5 and i am having problem live streaming to ios devices live streaming to mac, PC or android is nice and stable but to ios devices not getting stable streaming to start the streaming plays for 0.25 sec and then I get error movie can not load or sometimes I get error movie can not load from beginninghis issue I do not have aac encoder this is might be my problem Below is configuration for my m3u8 files just incase
#EXTM3U
#EXT-X-STREAM-INF:PROGRAM-ID=1,BANDWIDTH=110000
http://issosnj.dyndns.org/hls-live/livepkgr/_definst_/liveevent/livest ream1.m3u8
[code]......
I have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 RepliesI'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
I m a begginer with FMS. I have a licenced version of FMS and I want to stream a live video from the Localhost or another machine with camera. And then then I should broadcast it to many clients. I don't know how to begin
View 12 RepliesI am developing Video Chat over Ip (including audio and text too). But I am unable to get the proper startup material for my desktop application.
View 2 RepliesFinding faults in my reasoning, or expanding the discussion further. We are benchmarking FMS 3.5.x for live dynamic streaming and we have run across an issue. When throttling the client from a high bandwidth (1500kbps) to a low bandwidth (325kbps) via a bandwidth shaper (a physical firewall) it takes a very long (real-) time for the client to see the new stream-quality.
During the investigation of this issue we have narrowed this down to:
1. when transition is requested from client, the client-side buffer is 1/2 i.e. 4-5seconds.
2. if transition is request on a client with unlimited bandwidth, it takes about 6 seconds for the server to process, find an acceptable switching position and send a "transition.complete" event.
3. on the throttled client however, this event takes much longer.
[Code]...
is there a possibility of authentication FMLE users to the server on the FMSS? Or such a possibility exists only in the FMIS? Actually, somebody had to deal with this problem? Decide whether it?
View 1 RepliesI have created a live stream using Amazon Web Services and Adobe Flash Media Server 4.5.AWS provides me with both a .f4m and .m3u8 file, to use in <object><embed> and <video> tags, respectively.The .f4m loads fine on my desktop browser, and the .m3u8 file loads fine on my iOS device. However, my Android devices will not load either file. What code/solutions are there to get this to play on Android devices?[code]
View 4 RepliesWe (the university I work for) want to add an IP camera to the top of a building (so it has to be IP, we can't put a machine up there, so USB is out of the question) to stream a live view of the quad. The problem is, I can't find a way to stream any IP Cameras through the flash live encoder. I tried a camera by Axis, but their capture driver only supported MJPEG which the live encoder does not.
View 3 RepliesCan Adobe Flash Media Streaming Server 3.5 run on AMD Athlon Dual Sock Quad Core?I just requested a Dell server to be added to our farm to run as a Media Server and to my surprise, while reading the requirements for FMS it states the following: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended)
View 2 RepliesWhat file should android devices use to view a live video stream? myeventname.f4m? I'm using the following html5 code and it's not working in Android devices.
<video id="liveWebcast"
poster="poster.jpg"
src="[URL]" controls autoplay>
</video>
I have an mp3 player, that I would like to add live streams to.
here is an example url of what I'd like to stream. [URL]
is there a way to do that in flash AS3?
Can we customize the flash player in Flash Media Server 4 like putting branding name (say some corner) like that? I am thinking to put my brand (my branding name) on a flash player while I streaming live event is it possible?
View 4 RepliesI am working on streaming programs through "Adobe flash Media Live encoder" in my website.The steps that i done for streaming is
* Installed Adobe flash media live encoder
* In the FMS URL entered as " rtmp://myserver ip/live "
* In stream given as "livestream"
* when i click connect the follwing error is displaying " Invalid primary FMSURL "
The website i am going to implement is [url]... which is done using PHP. Is there anything i have to do in coding to connect the media server.
when i try to live stream with FMS! I can stream video with Flash media live encoder to the server but when i create the player to recieve the livestream from server,i can not recieve the live stream,can anyone give me a step by step tutorial of how to do it?
View 1 RepliesWhile streaming a live worship service in Flash format, I'll need to archive only the sermon in Flash. I do not want to handle this in post/editing. What will I need to make this happen?
View 6 RepliesI instal on a machine the Adobe Flash Server 3.5.I have the Flash media administration console but i do not know how i can configure the machine to be a flash media streaming server.I have a tv card on my machine and i want use de flash media encoder to stream to a web page the tv signal on my tv card.I think i need to send the signal encoded use the flash media encoder to a flash media streaming server correct?
View 1 RepliesI would like to ask if Adobe Flash Media Streaming Server (not Interactive) supports the following Stream.play (server-side streaming), but not necessarily server-side playlists which I know is a FMIS featureunsigned server-side asctionscripts (main.asc) The difference is in the price of course, one is $1000, the other is $5000, so if the two above are supported, I will buy FMSS
View 1 Repliesis it possible to built a Video Chat without the need for server side code so that I can run it on a Flash Media Streaming Server?
View 7 RepliesFlash media server 3.5 to stream live video to a webpage with flex GUI embedded in it.For this I have used Adobe flash media server start screen .I could able to stream video correctly.I want to know how long it could be do like this.ie suppose I have to stream like this for 3 or 6 months
View 2 RepliesI'm building a video conferencing applicaition for a portal. But now when considering which version of flash media server to buy, I run into some problem. So can anyone helps me about comparing this two versions: Flash Media Streaming Server and Flash Media Interactive server, like if I use Flash Media Streaming Server, some function like NetStream.pause() may not work or something like that? I'm not sure if this is a foolish question but please let me know.
View 3 RepliesI have been working on a Flex application that sends a feed from my webcam to the Flash Media server. The application connects to the server fine but for some reason the camera is not sending anything to the Media Server. I am pretty sure that the answer to my question is really simple but I need another set of eyes to llok at my code and tell me what I am doing wrong.
[Code]....
I'm finally getting the hang of the Dynamic Streaming of live video content via FMS 3.5.2 and FMLE, and to a lesser extent, the DVR functionality that has newly been made available.
Inquiring minds want to know... is it possible to add DVR functionality to live Dynamically Streamed video content? In other words, I want to be able to provide DVR capability to our live videos that are being streamed at 3 different bitrates.
Is that currently possible? Jodi, can you ask David Hassoun, who seems to be the leading authority at the moment, if this is possible, and if so, if there's a tutorial we can access?
I was pretty confused while stetting up a FMS and reading the docs. Live Streaming is by default enabled for everyone without password. Then I discovered and installed the authentication module. But this does not work and is not well documented. Also the download page states that it will work with FMS but some lines below it is stated that: "the Flash Media Server Authentication Add-In is only available for the Flash Media Interactive Server and the Flash Media Developer Server. This Add-In does not work with the Flash Media Streaming Server." hmmm. Confusing. How can I prevent that everyone is using my server for live streaming?
View 16 RepliesI've tested an exciting tutorial about streaming live video with Flash Media Server 3.5..every thing went good and i could see my webcam broadcast from my machine through my web site but unfortunately.I can't see it from any other machine.I'm using Microsoft windows XP SP2and flash media live encoder 3but my web server run UNIX is this a problem?
View 15 RepliesI have live streaming but problem is that it is stopping and continues every 2-3 second, I do not know which issues causes it.
View 3 RepliesI'm hoping there's a simple answer to this. I'm attempting to stream a live event using FMLE and FMS. The first thing that throws me off is that I cannot push the stream to the server using RTMPE, only RTMP[T]. I assume this is because the the encryption is handled by the server and not the encoder. However, for the sake of security I would like to disable RTMP connections from the flash player to the server. Yet it would seem that if I incorporate the server side scripting described here [URL] (namely the changes to my main.asc file), that my server would reject an RTMP connection from FMLE? Is that correct? If so, where do I go from here? Can I broadcast a live stream using RTMPE only? Do I need a different encoder or something, or am I just missing a very simple point?
View 1 RepliesThough I'm sure somebody's asked the question, I did a bunch of searches on this and couldn't find anything definitive.
What's the latest on the issue? Is the livepkgr app useful for this?
The article Live dynamic streaming with Flash Media Server 3.5 mentions two different bit rates for each video size type.But why? Are these bitrates related to different compression ratios? And if so, why exactly two?
View 4 Replies