I would like to ask if Adobe Flash Media Streaming Server (not Interactive) supports the following Stream.play (server-side streaming), but not necessarily server-side playlists which I know is a FMIS featureunsigned server-side asctionscripts (main.asc) The difference is in the price of course, one is $1000, the other is $5000, so if the two above are supported, I will buy FMSS
View 1 Replies
Can Adobe Flash Media Streaming Server 3.5 run on AMD Athlon Dual Sock Quad Core?I just requested a Dell server to be added to our farm to run as a Media Server and to my surprise, while reading the requirements for FMS it states the following: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended)
View 2 RepliesI have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 RepliesI'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
Apply the security patch found here:http:[url]............For more information see the followingresource:CVE: 2009-1365
View 1 RepliesI instal on a machine the Adobe Flash Server 3.5.I have the Flash media administration console but i do not know how i can configure the machine to be a flash media streaming server.I have a tv card on my machine and i want use de flash media encoder to stream to a web page the tv signal on my tv card.I think i need to send the signal encoded use the flash media encoder to a flash media streaming server correct?
View 1 Repliesis it possible to built a Video Chat without the need for server side code so that I can run it on a Flash Media Streaming Server?
View 7 RepliesFlash media server 3.5 to stream live video to a webpage with flex GUI embedded in it.For this I have used Adobe flash media server start screen .I could able to stream video correctly.I want to know how long it could be do like this.ie suppose I have to stream like this for 3 or 6 months
View 2 RepliesI have a FMS 4.5 with (License) and is set up and running fine, now I want to stream Live to the IOS Devices but no luck. I have a web page for test purpose with the video src tags to: URL... and in the server I have a livestream.m3u8 pointing to the same URL..., Now the Encoder have the AAC plugin and all the presets like it shut but when I go to see it in my IPad 2 this is how it looks.
View 11 RepliesI'm building a video conferencing applicaition for a portal. But now when considering which version of flash media server to buy, I run into some problem. So can anyone helps me about comparing this two versions: Flash Media Streaming Server and Flash Media Interactive server, like if I use Flash Media Streaming Server, some function like NetStream.pause() may not work or something like that? I'm not sure if this is a foolish question but please let me know.
View 3 RepliesWe are about to buy a Adobe Flash Media Streaming Server 3.5 and we don't know if it's not recommended to install the software in a vmware environment.
View 1 RepliesI am working on streaming programs through "Adobe flash Media Live encoder" in my website.The steps that i done for streaming is
* Installed Adobe flash media live encoder
* In the FMS URL entered as " rtmp://myserver ip/live "
* In stream given as "livestream"
* when i click connect the follwing error is displaying " Invalid primary FMSURL "
The website i am going to implement is [url]... which is done using PHP. Is there anything i have to do in coding to connect the media server.
I evaluated the Flash Media Server 3.5 by running samples for .flv,f4v,.mpg,.avi video formats and the product looks excellent to work as a Video Streaming Server - Live Video, Recorded Video Viewing by Audiences.
Query : ELearning Course modules are designed and developed using Macromedia Flash and Action Scripting Language.The Output Formats of the LMS are .swf files.As Elearning courses - LMS offer/involves User Interaction (Viewing courses by Students, Giving Exams for obtaining certification etc).Can we also use the Flash Media Server 3.5 for integrating with LMS Site running in IIS 6.0/7.0 ?
Client : IE 6.0/7.0, Macromedia Flash Player 10.0.
I m a begginer with FMS. I have a licenced version of FMS and I want to stream a live video from the Localhost or another machine with camera. And then then I should broadcast it to many clients. I don't know how to begin
View 12 RepliesI have a windows server box 2008 R2 with Adobe Flash Media Server installed on it version 4.5. I have installed Flash Media Server and input the serial and all that fun stuff. All ports have been forwarded properly, Once the server is up and running I go to the admin console just to make sure all is running well. Once up and running I turn to my Media Encoder and enter my FMS URL as well as the stream, (livestream?adbe-live-event=liveevent). I select my input device and it connects and says streaming to primary. Now Yesterday I did this and it was streaming correctly i check with my ipad and the livepkgr was working, I have live video on my ipad. I then went to my website to check and make sure all was working on there and sure enough my live event was being streamed to there was well! Sweet right? No wrong....The server was shut down after this test trial assuming everything was working.
When I turned it on today the flash media encoder still connected and streamed right and when i check the ADMIN console it appears to be working and connected the right way, but my problem is when i go to my website i just get a black screen with nothing playing on it, and on my ipad for some reason I get the last 30 seconds of a piece of the live clip we where streaming last night and then it stops.......I have nooooo clue what is wrong and it is driving me up the wall. My hope is to be able to stream from my mac to my Media Server and then be able to embed it into my website as well as have it playable on ipad/Android (havent worked on android part yet because of this whole problem).
I am developing Video Chat over Ip (including audio and text too). But I am unable to get the proper startup material for my desktop application.
View 2 RepliesI have a virtual directory (Storage Area Network) in 'C' drive as well as in "webroot" folder in Flash Streaming Server. What do I need to do to make RTMP videos work from SAN directory on Flash Streaming Server. It works fine for http. RTMP from vod -> application folder works fine. I have done a lot of research and found out that we can use virtual directories for streaming videos. I am unable to find steps on how to use it..
View 4 RepliesI have installed Adobe Flash Media Server in Ubuntu. When I run the command sudo ./fmsmgr server start it says that Server: start command: Server service start not found. Exiting When I start adminserver in the same way, the message displayed is : Starting Adobe Flash Media Admin Server(check /var/log/messages) In the messages, the following is displayed:
[Code]...
I have FMS 3.5 (Streaming Server) installed, and I am trying to have it render media from locations other than default. Here is my setup.
[Code]...
Basically I am trying to render media specific to different departments (test,test1). So "Department Test" media files are under [E:ContentFMSapplicationsvod est] and "Department Test1" media files are under [E:ContentFMSapplicationsvod est1]
I have created a live stream using Amazon Web Services and Adobe Flash Media Server 4.5.AWS provides me with both a .f4m and .m3u8 file, to use in <object><embed> and <video> tags, respectively.The .f4m loads fine on my desktop browser, and the .m3u8 file loads fine on my iOS device. However, my Android devices will not load either file. What code/solutions are there to get this to play on Android devices?[code]
View 4 RepliesWhat would be some top reasons an FLV will not stream with Flash Media Streaming Serve 3.5? I ran the FLVcheck.exe on the FLV and it passed; however, the FLV will not stream. If I could just get some good reasons that would cause an FLV from streaming I think that will give me a good starting point for troubleshooting.
[Code]....
I need urgently to build simple streaming live video web application.i need to create some live video streams from webcamin one computer through my server to webcam in another computer is Adobe Flash Media Streaming Server is able to do it or only Adobe Flash Media Interactive Server is able to do it?if Adobe Flash Media Streaming Server is able to deal with live video streams is there any major difference between them like for example is it possible to record live video streams in Media Streaming Server? The only clear difference between them is the price.I can afford baying the Media Streaming Server bat not the Media Interactive Server and i need to decide before i am turning to other very less quality java based solutions.
View 1 RepliesHow can i connect to my own server to watch my streaming video from another computer?
View 10 RepliesThe company I work for installed FMS on a server running Centos for a customer who needed streaming media capabilities. It worked fine for 3 months until today the customer called us and informed us that their client program can no longer connect to the streaming media server. No one has done anything to the server to cause this to happen. When attempting to access the admin console to diagnose the program, the streaming server returned a 500 Internal Server Error. So I tried another page. Same result. Reboots of both the hardware server and the FMS have changed nothing.
View 5 RepliesThe $995.00 version is listed as not supporting server side playlists. Is it possible to implement internet TV station like functionality using that version? I would like to have a list of files to play out and have it so those connected are all viewing the same thing.
View 1 RepliesI am looking for a sample media player using OSMF for RTMFP P2P streaming media.
View 2 RepliesWe (the university I work for) want to add an IP camera to the top of a building (so it has to be IP, we can't put a machine up there, so USB is out of the question) to stream a live view of the quad. The problem is, I can't find a way to stream any IP Cameras through the flash live encoder. I tried a camera by Axis, but their capture driver only supported MJPEG which the live encoder does not.
View 3 RepliesI am streaming pre recorded audio files (mp4) to an AIR client. I have tried two different solutions,
streaming the file directly with the NetStream.play("mp4:xxxxx.m4a") and creating a server side playlist, adding the same sound clip and then streaming the playlist. The problem is, when streaming the playlist i get a few NetStream.Play.InsufficientBW, this does not happen when streaming the file direct. Both solutions uses bufferTime=1.0
I would like to use a server side playlist to implement a simple key solution so that the client dont know the full path to the file, but instead sends a key to a custom server side function that looks up the file path and creates a stream for the client.
We are streaming a one hour F4V from streaming media server 3.5.2 and for some reason it is seeing our one hour video as being 10 hours long. We have tons of other videos and never ran into this problem in any of the other files. This is the only file that exceeds one hour. This occurs in the default player from the streaming server.
View 1 RepliesFinding faults in my reasoning, or expanding the discussion further. We are benchmarking FMS 3.5.x for live dynamic streaming and we have run across an issue. When throttling the client from a high bandwidth (1500kbps) to a low bandwidth (325kbps) via a bandwidth shaper (a physical firewall) it takes a very long (real-) time for the client to see the new stream-quality.
During the investigation of this issue we have narrowed this down to:
1. when transition is requested from client, the client-side buffer is 1/2 i.e. 4-5seconds.
2. if transition is request on a client with unlimited bandwidth, it takes about 6 seconds for the server to process, find an acceptable switching position and send a "transition.complete" event.
3. on the throttled client however, this event takes much longer.
[Code]...
