What would be some top reasons an FLV will not stream with Flash Media Streaming Serve 3.5? I ran the FLVcheck.exe on the FLV and it passed; however, the FLV will not stream. If I could just get some good reasons that would cause an FLV from streaming I think that will give me a good starting point for troubleshooting.
[Code]....
I have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 RepliesCan Adobe Flash Media Streaming Server 3.5 run on AMD Athlon Dual Sock Quad Core?I just requested a Dell server to be added to our farm to run as a Media Server and to my surprise, while reading the requirements for FMS it states the following: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended)
View 2 RepliesI read all information from above and related all posts.Now my question/problem is,Can we use DynamicStream to access and handle live stream user's web camera instead of normal NetStream?Our application is like video conferencing.In our application user's stream is not being stored on server. It is just being published as live.Now when I publish user's webcam stream as "record" (in ns.publish("stream_name","record"))I am able to get the stream.But when I publish the stream as "live" (in ns.publish("stream_name","live"))the stream is not being retrieved. Even sometimes I get an exception in "DynamicStream.as" provided by Adobe
View 2 RepliesWhile streaming the audio through FMS 3.5, audio starts breaking at the receiver's end after some time. can anyone please provide a suitable solution?
View 4 RepliesI have a work station with Osprey 230, I need to stream the same stream on two diffrent URL via 2 network cards. Is that possible ? Which software you reccommend ?
View 1 RepliesJust like the title says I am using Flash Media Live Encoder and I have three streams. The encoder is sending the streams just fine but I am not sure how to deliver it to the client. The only one that shows up is "livestream1". "Livestream2" and "Livestream3" won't even come up.
View 2 RepliesI'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
when i try to live stream with FMS! I can stream video with Flash media live encoder to the server but when i create the player to recieve the livestream from server,i can not recieve the live stream,can anyone give me a step by step tutorial of how to do it?
View 1 RepliesI instal on a machine the Adobe Flash Server 3.5.I have the Flash media administration console but i do not know how i can configure the machine to be a flash media streaming server.I have a tv card on my machine and i want use de flash media encoder to stream to a web page the tv signal on my tv card.I think i need to send the signal encoded use the flash media encoder to a flash media streaming server correct?
View 1 RepliesI would like to ask if Adobe Flash Media Streaming Server (not Interactive) supports the following Stream.play (server-side streaming), but not necessarily server-side playlists which I know is a FMIS featureunsigned server-side asctionscripts (main.asc) The difference is in the price of course, one is $1000, the other is $5000, so if the two above are supported, I will buy FMSS
View 1 Repliesis it possible to built a Video Chat without the need for server side code so that I can run it on a Flash Media Streaming Server?
View 7 RepliesFlash media server 3.5 to stream live video to a webpage with flex GUI embedded in it.For this I have used Adobe flash media server start screen .I could able to stream video correctly.I want to know how long it could be do like this.ie suppose I have to stream like this for 3 or 6 months
View 2 RepliesI have a FMS 4.5 with (License) and is set up and running fine, now I want to stream Live to the IOS Devices but no luck. I have a web page for test purpose with the video src tags to: URL... and in the server I have a livestream.m3u8 pointing to the same URL..., Now the Encoder have the AAC plugin and all the presets like it shut but when I go to see it in my IPad 2 this is how it looks.
View 11 RepliesHas there been any further discussion regarding restricting who can stream to FMSS (not FMIS or the development version).
I found this article, but I don't know if this was ever fully resolved:
[URL]
I don't want just anyone to connect to my server to stream live. I want to restrict by IP address, authentication, or any other means.
I am trying to create a flash player to stream an on online Internet radio station using FMS. I chose FMS after being told that I need RTMP server to extract the metadata. Our radio audio is being encoded using a DJ interface called SAM Broadcaster. But for some reason, it does not have an option to send over the stream directly to a Flash Media Server. Only options are either IceCAST or ShoutCAST. How should i setup the stream? Should it be Stream encoder>> IceCAST/SHOUTCast Server>>Flash Media Server>>Flash Player Client. Or should I setup Stream Encoder>>Flash Media Server>>Flash Player Client? Shouldn't Flash Media Server be an alternative to IceCast or Shoutcast? If that is the case, how do I send over the stream from SAM Broadcaster directly to Flash Media Server without restreaming through another streaming server?
View 2 RepliesI m a begginer with FMS. I have a licenced version of FMS and I want to stream a live video from the Localhost or another machine with camera. And then then I should broadcast it to many clients. I don't know how to begin
View 12 RepliesI have a windows server box 2008 R2 with Adobe Flash Media Server installed on it version 4.5. I have installed Flash Media Server and input the serial and all that fun stuff. All ports have been forwarded properly, Once the server is up and running I go to the admin console just to make sure all is running well. Once up and running I turn to my Media Encoder and enter my FMS URL as well as the stream, (livestream?adbe-live-event=liveevent). I select my input device and it connects and says streaming to primary. Now Yesterday I did this and it was streaming correctly i check with my ipad and the livepkgr was working, I have live video on my ipad. I then went to my website to check and make sure all was working on there and sure enough my live event was being streamed to there was well! Sweet right? No wrong....The server was shut down after this test trial assuming everything was working.
When I turned it on today the flash media encoder still connected and streamed right and when i check the ADMIN console it appears to be working and connected the right way, but my problem is when i go to my website i just get a black screen with nothing playing on it, and on my ipad for some reason I get the last 30 seconds of a piece of the live clip we where streaming last night and then it stops.......I have nooooo clue what is wrong and it is driving me up the wall. My hope is to be able to stream from my mac to my Media Server and then be able to embed it into my website as well as have it playable on ipad/Android (havent worked on android part yet because of this whole problem).
I am developing Video Chat over Ip (including audio and text too). But I am unable to get the proper startup material for my desktop application.
View 2 RepliesI'm building a video conferencing applicaition for a portal. But now when considering which version of flash media server to buy, I run into some problem. So can anyone helps me about comparing this two versions: Flash Media Streaming Server and Flash Media Interactive server, like if I use Flash Media Streaming Server, some function like NetStream.pause() may not work or something like that? I'm not sure if this is a foolish question but please let me know.
View 3 RepliesI have FMS 3.5 (Streaming Server) installed, and I am trying to have it render media from locations other than default. Here is my setup.
[Code]...
Basically I am trying to render media specific to different departments (test,test1). So "Department Test" media files are under [E:ContentFMSapplicationsvod est] and "Department Test1" media files are under [E:ContentFMSapplicationsvod est1]
I have a virtual directory (Storage Area Network) in 'C' drive as well as in "webroot" folder in Flash Streaming Server. What do I need to do to make RTMP videos work from SAN directory on Flash Streaming Server. It works fine for http. RTMP from vod -> application folder works fine. I have done a lot of research and found out that we can use virtual directories for streaming videos. I am unable to find steps on how to use it..
View 4 RepliesI am looking for a sample media player using OSMF for RTMFP P2P streaming media.
View 2 Replies'URL missing from Media tag' on FMS4.5 HTTP Live Stream playback.I have spent a whole day trying in vain to publish f4m live http streams from FMLE using FMS 4.5, and almost everything I try results in the error .The F4M document contains errors URL missing from Media tag...in both Flash Media Playback and the fms videoPlayer app.Other people seem to have seen this and solved it, but I've found nothing that helps. I have tried to publish a single stream, and with multiple bitrates. For the latter, I followed the Adobe video tutorial as follows:
Multiple bitrate live
================
I'm publishing 3 streams from FMLE, using
FMS URL: rtmp://[serveraddress]/livepkgr[code]..........
Beside Flash Media Encoder, can I use a live stream from Windows Media Services?We have live streaming with Windows Media Server, but now want also offer to mobile devices, but we dont re-encode the entire streams (tvs) again, it would be great if we can use a stream from windows to tunnel it to flash media server.
View 1 RepliesIs there a way to stream data instead of media files? In particular I'm interested to stream swf files that will be dinamically loaded by another swf client. I see this interesting message talking about how to do this on Wowza but I prefer to find a solution also in FMS to use the SWF Verification feature.
View 1 RepliesI have FLV files streaming fine from the media folder in the applications folder.I want to split up the videos into folders to make them more manageable.If I create another folder in the applications folder at the same level as the media folder and put a video in there the video does not play.
View 4 RepliesWe are streaming a one hour F4V from streaming media server 3.5.2 and for some reason it is seeing our one hour video as being 10 hours long. We have tons of other videos and never ran into this problem in any of the other files. This is the only file that exceeds one hour. This occurs in the default player from the streaming server.
View 1 RepliesI'm new to Adobe Flash and I'm just trying out the Flashe Media Server 4.5 to stream live video on a local machine. I'm using a FLME 3.2 to capture the video from my digital camera, which works fine, and I can connect to the server with no worries as well. But I have issues streaming the content in the Sample Video Player that comes with the server.
[Code]....
I've also tried playing some sample videos on it. it even refuses to play those. What could be the problem??
I need urgently to build simple streaming live video web application.i need to create some live video streams from webcamin one computer through my server to webcam in another computer is Adobe Flash Media Streaming Server is able to do it or only Adobe Flash Media Interactive Server is able to do it?if Adobe Flash Media Streaming Server is able to deal with live video streams is there any major difference between them like for example is it possible to record live video streams in Media Streaming Server? The only clear difference between them is the price.I can afford baying the Media Streaming Server bat not the Media Interactive Server and i need to decide before i am turning to other very less quality java based solutions.
View 1 Replies
