Media Server :: RTMFP Streaming Media Playback Using OSMF
Sep 13, 2010I am looking for a sample media player using OSMF for RTMFP P2P streaming media.
View 2 RepliesI am looking for a sample media player using OSMF for RTMFP P2P streaming media.
View 2 RepliesThere are 25 livestreams streaming to FMS4 server by fmle3.2,and client number is 20, (FMSCore.exe)CPU usage is about 20%~40%, how can i reduce cpu usage?
CPU: 2x E7320 2.13G
when I heard that Amazon cloud services are now including FMS for a marginal increase in cost. So all I am looking to do is:
1) Record off a web cam and store the video using FMS
2) Play the video stream using FMS.
I used video component for live stream .It is working well.but I need play and pause button on mouse over video in live streaming.I do not know how i do in mouse over in live streaming.flvplayback component have mouseover option in normal video streaming.Any possible way to use flvplayback component in livestreaming video?Any idea for mouse over pause and play button or any playback component(like flvplayback ).
View 7 RepliesI have the streaming server 3.5.3. The sample player page for the dynamic streaming is here: [URL].click on the dynamic sample. pause and wait a few minutes for disconnect from the server. When you hit play, it starts from that spot and also starts from the beginning in the background audio while showing the buffering orange circle the whole time.
My users are students watching long lectures, they pause all the time. when they come back, it is a mess.
Does anyone have an experience of using Strobe Media Playback (OSMF) in a real project? How is it compared to JW Player and Flowplayer?
View 2 RepliesI am trying to make clients to connect FMS4 server over RTMFP for my video conferencing application.It is basically a client-server media relay application in which clients with webcam/mic connect the server and the server relays video/audio data to other clients. This application is working perfectly with FMS 3.0 but it was RTMP rather than RTMFP - I simply replaced 'RTMP' with 'RTMFP' in netConnetion and tried to test in Flash Media Development Server 4.0, but it is failed to make a connection from a client - it was working after replacing it back with 'RTMP' of course.
I believe server-client media relay is possibe using RTMFP in FMS4 because Adobe said:"Although RTMFP is often used for peer-assisted networking applications, you can use RTMFP in unicast, broadcast, and multi-point publishing applications as well. Simply replace the RTMP protocol in the NetConnection.connect() call with the RTMFP protocol:" in url...
Can Adobe Flash Media Streaming Server 3.5 run on AMD Athlon Dual Sock Quad Core?I just requested a Dell server to be added to our farm to run as a Media Server and to my surprise, while reading the requirements for FMS it states the following: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended)
View 2 RepliesI have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 RepliesFirst,i am in project for creating some website with streaming video.The connection to the host is bad and i need to know if Flash media server can reconnect if connection is lost during playback and second,is there some kind of plugin for subtitles,this is very important,If there is a positive answers on those two questions,the third would be "where can i buy it and how"?
View 3 RepliesI'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
'URL missing from Media tag' on FMS4.5 HTTP Live Stream playback.I have spent a whole day trying in vain to publish f4m live http streams from FMLE using FMS 4.5, and almost everything I try results in the error .The F4M document contains errors URL missing from Media tag...in both Flash Media Playback and the fms videoPlayer app.Other people seem to have seen this and solved it, but I've found nothing that helps. I have tried to publish a single stream, and with multiple bitrates. For the latter, I followed the Adobe video tutorial as follows:
Multiple bitrate live
================
I'm publishing 3 streams from FMLE, using
FMS URL: rtmp://[serveraddress]/livepkgr[code]..........
in the standard embed code:
[Code].....
the player "FlashMediaPlayback" is loaded from remote ftp adobe server.
How can I load the player from my local machine?
I instal on a machine the Adobe Flash Server 3.5.I have the Flash media administration console but i do not know how i can configure the machine to be a flash media streaming server.I have a tv card on my machine and i want use de flash media encoder to stream to a web page the tv signal on my tv card.I think i need to send the signal encoded use the flash media encoder to a flash media streaming server correct?
View 1 RepliesI would like to ask if Adobe Flash Media Streaming Server (not Interactive) supports the following Stream.play (server-side streaming), but not necessarily server-side playlists which I know is a FMIS featureunsigned server-side asctionscripts (main.asc) The difference is in the price of course, one is $1000, the other is $5000, so if the two above are supported, I will buy FMSS
View 1 RepliesI have FMS 3.5 (Streaming Server) installed, and I am trying to have it render media from locations other than default. Here is my setup.
[Code]...
Basically I am trying to render media specific to different departments (test,test1). So "Department Test" media files are under [E:ContentFMSapplicationsvod est] and "Department Test1" media files are under [E:ContentFMSapplicationsvod est1]
is it possible to built a Video Chat without the need for server side code so that I can run it on a Flash Media Streaming Server?
View 7 RepliesFlash media server 3.5 to stream live video to a webpage with flex GUI embedded in it.For this I have used Adobe flash media server start screen .I could able to stream video correctly.I want to know how long it could be do like this.ie suppose I have to stream like this for 3 or 6 months
View 2 RepliesI have a FMS 4.5 with (License) and is set up and running fine, now I want to stream Live to the IOS Devices but no luck. I have a web page for test purpose with the video src tags to: URL... and in the server I have a livestream.m3u8 pointing to the same URL..., Now the Encoder have the AAC plugin and all the presets like it shut but when I go to see it in my IPad 2 this is how it looks.
View 11 RepliesWhat would be some top reasons an FLV will not stream with Flash Media Streaming Serve 3.5? I ran the FLVcheck.exe on the FLV and it passed; however, the FLV will not stream. If I could just get some good reasons that would cause an FLV from streaming I think that will give me a good starting point for troubleshooting.
[Code]....
I have written a program to publish the audio and video data to the FMS. I am publishing the video data to FMS in live mode and trying to play back via OSMF player. When i start publishing video data in the livepkgr application folder of FMS files like .bootstrap, .control, .meta are getting created. But when i try to playback via OSMFplayer i will get error 1009 and one intersting thing what i have observed is after 7 minutes this error won't come and OSMF player starts playing properly. give the solution for error 1009 which comes only for first 7 minutes?
View 12 RepliesI m a begginer with FMS. I have a licenced version of FMS and I want to stream a live video from the Localhost or another machine with camera. And then then I should broadcast it to many clients. I don't know how to begin
View 12 RepliesI have a windows server box 2008 R2 with Adobe Flash Media Server installed on it version 4.5. I have installed Flash Media Server and input the serial and all that fun stuff. All ports have been forwarded properly, Once the server is up and running I go to the admin console just to make sure all is running well. Once up and running I turn to my Media Encoder and enter my FMS URL as well as the stream, (livestream?adbe-live-event=liveevent). I select my input device and it connects and says streaming to primary. Now Yesterday I did this and it was streaming correctly i check with my ipad and the livepkgr was working, I have live video on my ipad. I then went to my website to check and make sure all was working on there and sure enough my live event was being streamed to there was well! Sweet right? No wrong....The server was shut down after this test trial assuming everything was working.
When I turned it on today the flash media encoder still connected and streamed right and when i check the ADMIN console it appears to be working and connected the right way, but my problem is when i go to my website i just get a black screen with nothing playing on it, and on my ipad for some reason I get the last 30 seconds of a piece of the live clip we where streaming last night and then it stops.......I have nooooo clue what is wrong and it is driving me up the wall. My hope is to be able to stream from my mac to my Media Server and then be able to embed it into my website as well as have it playable on ipad/Android (havent worked on android part yet because of this whole problem).
I'm building a video conferencing applicaition for a portal. But now when considering which version of flash media server to buy, I run into some problem. So can anyone helps me about comparing this two versions: Flash Media Streaming Server and Flash Media Interactive server, like if I use Flash Media Streaming Server, some function like NetStream.pause() may not work or something like that? I'm not sure if this is a foolish question but please let me know.
View 3 RepliesI am developing Video Chat over Ip (including audio and text too). But I am unable to get the proper startup material for my desktop application.
View 2 RepliesI built a simple rtmfp app using flash builder (I tested using the cirrus dev key to make sure it connects) but I cant seem to use the rtmfp service on my fms development server. Ive modified the index.html (in the webroot dir on the fms computer) to provide a link to a folder containing the html file and the swf file generated from my flash builder project. When I type in "rtmfp://localhost/" on my app I receive a "NetConnection.Connect.Failed" or a "NetConnection.Connect.Rejected" (if i do it directly on the fms computer).
Do I need to place my app in the "applications" directory to run properly? Ive checed the adaptor.xml file and everthing seems correct, I even added my public ip to the host port field, is there some confguration I missed?
Im not sure what Im doing wrong, Ive double checked my router and the fms computer's firewall thorugh a port scan and found the ports to be allowing traffic through.
I need urgently to build simple streaming live video web application.i need to create some live video streams from webcamin one computer through my server to webcam in another computer is Adobe Flash Media Streaming Server is able to do it or only Adobe Flash Media Interactive Server is able to do it?if Adobe Flash Media Streaming Server is able to deal with live video streams is there any major difference between them like for example is it possible to record live video streams in Media Streaming Server? The only clear difference between them is the price.I can afford baying the Media Streaming Server bat not the Media Interactive Server and i need to decide before i am turning to other very less quality java based solutions.
View 1 RepliesI have established Flash Media Server 4.5 on the house computer with win7 a router wasn't present, the cord goes on a straight line to the computer, at me allocated IP. I want that it was possible to address to the server from the Internet. At first video was started only on a local computer, then after change resolved ип in "adaptor.xml" the starting page of the server has started to open with other computers and examples work, video plays. But to incorporate on "rtmfp" leaves only from that computer on which there is a server (under the test on http://cc.rtmfp.net/all green points and one more too with all green points) leaves that computers can incorporate to the server on "rtmp" as the example of the server with video translation works well, but on "rtmfp" connects only those at whom green points.
View 2 RepliesI was try to connect my FMS 4 development server (Redhat linux OS) in live which was not connected, but the same setup in local windows is connected.I do know whats the exact problem. Also i will stop the iptables in linux but no use.
View 6 RepliesI am testing RTMFP unicast for a video chat project using FM Developer Server 4.0.During the testing I overloaded the upload traffic to make packets dropped rather than suffering delay due to retransmission.
However, I see it makes a significant delay and it looks like doing retransmission just like RTMP.
Do you know if there is an option in FMS to disable the retransmission or other configuration I have to consider?One thing I found is "Netstream.videoReliable=false; Netstream.audioReliable=false;" but it doesn't make any difference.