when I heard that Amazon cloud services are now including FMS for a marginal increase in cost. So all I am looking to do is:
1) Record off a web cam and store the video using FMS
2) Play the video stream using FMS.
to generate thumbnails of the streaming video to control de contents of the video streaming. Could I do that in the server side?There is any setting to do that? Could I use the getOnMetadata method to catch a bitarray and then put in into a bitmap file?
View 1 RepliesI am looking for a sample media player using OSMF for RTMFP P2P streaming media.
View 2 RepliesWill there ever be the ability to add a 'Record' button to a player such as those used with Ustream, Justin.tv and other similar players? I run a live stream and would love for the viewers to have a 'Record' button so they may capture the video to their local hard drives for later playback.
View 1 RepliesI used video component for live stream .It is working well.but I need play and pause button on mouse over video in live streaming.I do not know how i do in mouse over in live streaming.flvplayback component have mouseover option in normal video streaming.Any possible way to use flvplayback component in livestreaming video?Any idea for mouse over pause and play button or any playback component(like flvplayback ).
View 7 RepliesI have the streaming server 3.5.3. The sample player page for the dynamic streaming is here: [URL].click on the dynamic sample. pause and wait a few minutes for disconnect from the server. When you hit play, it starts from that spot and also starts from the beginning in the background audio while showing the buffering orange circle the whole time.
My users are students watching long lectures, they pause all the time. when they come back, it is a mess.
I have a virtual directory (Storage Area Network) in 'C' drive as well as in "webroot" folder in Flash Streaming Server. What do I need to do to make RTMP videos work from SAN directory on Flash Streaming Server. It works fine for http. RTMP from vod -> application folder works fine. I have done a lot of research and found out that we can use virtual directories for streaming videos. I am unable to find steps on how to use it..
View 4 RepliesI want to record a stream which is published with Flash Live Encoder to FMS 3.5, but split the recording in files with predefined length. For example if a stream 'webcam' is published I want to record it in chunks of 10 minutes: 'webcam1.flv', 'webcam2.flv' ... From what I can tell there's no facility to work with timers. The only solution I could think of was using stream.record() with a time limit parameter but that seems like a hack because it triggerstStream.Record.DiskQuotaExceeded on the stream when the recordin should stop and start recording another chunk. Has anyone done something similar?
View 10 RepliesI'm trying to create an application in flash that will record the sound from the user and will save the data on the server.
View 1 RepliesCan Adobe Flash Media Streaming Server 3.5 run on AMD Athlon Dual Sock Quad Core?I just requested a Dell server to be added to our farm to run as a Media Server and to my surprise, while reading the requirements for FMS it states the following: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended)
View 2 RepliesI want to give my users the ability to record a video from WebCam (maximum 60 seconds) so the file should be big with proper quality settings.Do you know of a way to record it in memory (as Flash running in browser can't access file System) and then send it to server to save the file? I have build a functionality to capture a photo with Webcam and send it to the server but not sure about Video.(I prefer not to stream to Red5/FMS or similar as it's more relaible to keep things contained in the Flash file in my opinion) plus I had issues with quality of recording with Red5
View 1 RepliesI have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 RepliesI develop failover fms application with server-side action script. But i have a problem that FMS can't continue to record stream with record mode "append".
Environment: FMS 4.5.1 r484 on CentOS 5.5/6.0
Goals:
I have 2 same data streams in failover application and republish primary to livepkgr application.
I have to store of last 10 hours intact recorded video (DVR).
Failover app logic:
1. I create NetConnection and NetStream to livepackager;
2. When primary stream is connected it attach the primary stream to livePackager NetStream
3. If primary stream is disconnected it reattach the backup stream to livePackager NetStream
Problem: I have testing environment. It stop primary stream every 5 min, and started primary stream 5 min after stopping.
It work's, fine, but after a few hours testing LIVEPACKAGER falls. It can't record a stream, NetStream.Record.Start -> NetStream.Record.NoAccess -> NetStream.Record.Stop
Search a solution: I try to relaunch recording process and have no success. try to shutdown/start livepackager, it's same, try to restart server, same no success.
I cant stream.clear() or record with mode "record" cause it clears my dvr cache, I cant clean stream directory in livepackager application.
[Code]....
First,i am in project for creating some website with streaming video.The connection to the host is bad and i need to know if Flash media server can reconnect if connection is lost during playback and second,is there some kind of plugin for subtitles,this is very important,If there is a positive answers on those two questions,the third would be "where can i buy it and how"?
View 3 RepliesIs it at all possible to save h.264 video from the Flash/Actionscript Camera (i.e. webcam) without needing a streaming server (like fms/wowza/red5)?Where I'm also going with this is, I'd like to take the sampleData from Microphone, and transcode it client-side so that a user can record h.264/aac (or mp3) and store it locally or remotely for easy viewing in a mp4 container....Any tips before I re-invent the wheel or run into a roadblock?
View 2 RepliesWe (the university I work for) want to add an IP camera to the top of a building (so it has to be IP, we can't put a machine up there, so USB is out of the question) to stream a live view of the quad. The problem is, I can't find a way to stream any IP Cameras through the flash live encoder. I tried a camera by Axis, but their capture driver only supported MJPEG which the live encoder does not.
View 3 RepliesI'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
We are streaming a one hour F4V from streaming media server 3.5.2 and for some reason it is seeing our one hour video as being 10 hours long. We have tons of other videos and never ran into this problem in any of the other files. This is the only file that exceeds one hour. This occurs in the default player from the streaming server.
View 1 RepliesI instal on a machine the Adobe Flash Server 3.5.I have the Flash media administration console but i do not know how i can configure the machine to be a flash media streaming server.I have a tv card on my machine and i want use de flash media encoder to stream to a web page the tv signal on my tv card.I think i need to send the signal encoded use the flash media encoder to a flash media streaming server correct?
View 1 RepliesI would like to ask if Adobe Flash Media Streaming Server (not Interactive) supports the following Stream.play (server-side streaming), but not necessarily server-side playlists which I know is a FMIS featureunsigned server-side asctionscripts (main.asc) The difference is in the price of course, one is $1000, the other is $5000, so if the two above are supported, I will buy FMSS
View 1 RepliesI have FMS 3.5 (Streaming Server) installed, and I am trying to have it render media from locations other than default. Here is my setup.
[Code]...
Basically I am trying to render media specific to different departments (test,test1). So "Department Test" media files are under [E:ContentFMSapplicationsvod est] and "Department Test1" media files are under [E:ContentFMSapplicationsvod est1]
is it possible to built a Video Chat without the need for server side code so that I can run it on a Flash Media Streaming Server?
View 7 RepliesFlash media server 3.5 to stream live video to a webpage with flex GUI embedded in it.For this I have used Adobe flash media server start screen .I could able to stream video correctly.I want to know how long it could be do like this.ie suppose I have to stream like this for 3 or 6 months
View 2 RepliesI have a FMS 4.5 with (License) and is set up and running fine, now I want to stream Live to the IOS Devices but no luck. I have a web page for test purpose with the video src tags to: URL... and in the server I have a livestream.m3u8 pointing to the same URL..., Now the Encoder have the AAC plugin and all the presets like it shut but when I go to see it in my IPad 2 this is how it looks.
View 11 RepliesI have configured FMS on Amazon EC2 I am trying to capture data from my webcam and push it to the server.For storing the webcam i created a new folder but as it is recommended in other forums "You need to replace the signed Live application (main.far) with main.asc in[FMS-Install-Dir]/samples/applications/live/ ;(For more Info: refer to documentations & live/readme.txt) "I am not able to locate samples folder from where i can get my main.asc file
View 4 RepliesI'm building a video conferencing applicaition for a portal. But now when considering which version of flash media server to buy, I run into some problem. So can anyone helps me about comparing this two versions: Flash Media Streaming Server and Flash Media Interactive server, like if I use Flash Media Streaming Server, some function like NetStream.pause() may not work or something like that? I'm not sure if this is a foolish question but please let me know.
View 3 Replies'URL missing from Media tag' on FMS4.5 HTTP Live Stream playback.I have spent a whole day trying in vain to publish f4m live http streams from FMLE using FMS 4.5, and almost everything I try results in the error .The F4M document contains errors URL missing from Media tag...in both Flash Media Playback and the fms videoPlayer app.Other people seem to have seen this and solved it, but I've found nothing that helps. I have tried to publish a single stream, and with multiple bitrates. For the latter, I followed the Adobe video tutorial as follows:
Multiple bitrate live
================
I'm publishing 3 streams from FMLE, using
FMS URL: rtmp://[serveraddress]/livepkgr[code]..........
im looking for a script that can record audio from a mic and save it to a fms server i came across a video email script but would like to have just a audio one that can do the samething as the video email with out the video part.
View 2 Repliesin the standard embed code:
[Code].....
the player "FlashMediaPlayback" is loaded from remote ftp adobe server.
How can I load the player from my local machine?
I m a begginer with FMS. I have a licenced version of FMS and I want to stream a live video from the Localhost or another machine with camera. And then then I should broadcast it to many clients. I don't know how to begin
View 12 Replies
