Flash media server 3.5 to stream live video to a webpage with flex GUI embedded in it.For this I have used Adobe flash media server start screen .I could able to stream video correctly.I want to know how long it could be do like this.ie suppose I have to stream like this for 3 or 6 months
View 2 RepliesI am developing Video Chat over Ip (including audio and text too). But I am unable to get the proper startup material for my desktop application.
View 2 Repliesis it possible to built a Video Chat without the need for server side code so that I can run it on a Flash Media Streaming Server?
View 7 RepliesHow can i connect to my own server to watch my streaming video from another computer?
View 10 RepliesCan Adobe Flash Media Streaming Server 3.5 run on AMD Athlon Dual Sock Quad Core?I just requested a Dell server to be added to our farm to run as a Media Server and to my surprise, while reading the requirements for FMS it states the following: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended)
View 2 RepliesI have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 RepliesI'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
I instal on a machine the Adobe Flash Server 3.5.I have the Flash media administration console but i do not know how i can configure the machine to be a flash media streaming server.I have a tv card on my machine and i want use de flash media encoder to stream to a web page the tv signal on my tv card.I think i need to send the signal encoded use the flash media encoder to a flash media streaming server correct?
View 1 RepliesI would like to ask if Adobe Flash Media Streaming Server (not Interactive) supports the following Stream.play (server-side streaming), but not necessarily server-side playlists which I know is a FMIS featureunsigned server-side asctionscripts (main.asc) The difference is in the price of course, one is $1000, the other is $5000, so if the two above are supported, I will buy FMSS
View 1 RepliesI have a FMS 4.5 with (License) and is set up and running fine, now I want to stream Live to the IOS Devices but no luck. I have a web page for test purpose with the video src tags to: URL... and in the server I have a livestream.m3u8 pointing to the same URL..., Now the Encoder have the AAC plugin and all the presets like it shut but when I go to see it in my IPad 2 this is how it looks.
View 11 RepliesI'm building a video conferencing applicaition for a portal. But now when considering which version of flash media server to buy, I run into some problem. So can anyone helps me about comparing this two versions: Flash Media Streaming Server and Flash Media Interactive server, like if I use Flash Media Streaming Server, some function like NetStream.pause() may not work or something like that? I'm not sure if this is a foolish question but please let me know.
View 3 Repliesto generate thumbnails of the streaming video to control de contents of the video streaming. Could I do that in the server side?There is any setting to do that? Could I use the getOnMetadata method to catch a bitarray and then put in into a bitmap file?
View 1 RepliesI'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
I m a begginer with FMS. I have a licenced version of FMS and I want to stream a live video from the Localhost or another machine with camera. And then then I should broadcast it to many clients. I don't know how to begin
View 12 RepliesI have a windows server box 2008 R2 with Adobe Flash Media Server installed on it version 4.5. I have installed Flash Media Server and input the serial and all that fun stuff. All ports have been forwarded properly, Once the server is up and running I go to the admin console just to make sure all is running well. Once up and running I turn to my Media Encoder and enter my FMS URL as well as the stream, (livestream?adbe-live-event=liveevent). I select my input device and it connects and says streaming to primary. Now Yesterday I did this and it was streaming correctly i check with my ipad and the livepkgr was working, I have live video on my ipad. I then went to my website to check and make sure all was working on there and sure enough my live event was being streamed to there was well! Sweet right? No wrong....The server was shut down after this test trial assuming everything was working.
When I turned it on today the flash media encoder still connected and streamed right and when i check the ADMIN console it appears to be working and connected the right way, but my problem is when i go to my website i just get a black screen with nothing playing on it, and on my ipad for some reason I get the last 30 seconds of a piece of the live clip we where streaming last night and then it stops.......I have nooooo clue what is wrong and it is driving me up the wall. My hope is to be able to stream from my mac to my Media Server and then be able to embed it into my website as well as have it playable on ipad/Android (havent worked on android part yet because of this whole problem).
is it possible fast forward, rewind video in flash media server through flash action script ?
View 5 RepliesI am a professional video editor specializing in corporate video and occassionally TV commercials. We often post "review" videos in Flash format to our website for our clients to check progress, etc. These videos are usually around 3 minutes in length and occasionally reach 20 minutes Trt. We use Adobe Production Premium CS4 which includes Flash CS4. I usually export the videos at the included preset, "Web Large Widescreen". The playback is almost instantaneous on most DSL and T1 connections. I use the "Full Screen" option button and when the videos are viewed full screen, they look amazing.
Here is the issue: I have recently created a video for a client that contains text and is approx. 50 minutes in length. The video format is 4x3 and the client wants the transcoded Flash video to display at a 640x480 square pixel dimension. The video plays fine over most DSL connections. It chokes on T1. Question: Can streaming Flash video provide better quality and playability for longer duration Web videos? Could any of you direct me to a chart that compares streaming Flash with the "simulated" streaming typically exported from Premiere CS4's Media Encoder?
We are deploying a media management system within a local network. FMS will be used to serve the media within the local network. Since we will only have max 100 users and we have a powerful dual 4 core xeon and the plan was to install IIS and FMS on the same machine. But now I read that there will be a conflict because the embedded Apache server that FMS installs will fight for port 80 with IIS.
So one possible solution: I've been reading in the Adobe docs that RTMP is far more efficient than tunneling through HTTP, so if we make sure all client machines allow RTMP (firewall exception) can we then change the configured Apache port and assume that Apache will never ever be used?
Heck in this case can we configure FMS and choose not to install Apache at all and be OK?
when i try to live stream with FMS! I can stream video with Flash media live encoder to the server but when i create the player to recieve the livestream from server,i can not recieve the live stream,can anyone give me a step by step tutorial of how to do it?
View 1 RepliesI have a virtual directory (Storage Area Network) in 'C' drive as well as in "webroot" folder in Flash Streaming Server. What do I need to do to make RTMP videos work from SAN directory on Flash Streaming Server. It works fine for http. RTMP from vod -> application folder works fine. I have done a lot of research and found out that we can use virtual directories for streaming videos. I am unable to find steps on how to use it..
View 4 RepliesI have FMS 3.5 (Streaming Server) installed, and I am trying to have it render media from locations other than default. Here is my setup.
[Code]...
Basically I am trying to render media specific to different departments (test,test1). So "Department Test" media files are under [E:ContentFMSapplicationsvod est] and "Department Test1" media files are under [E:ContentFMSapplicationsvod est1]
what will be the best way for video conference without any delay for multiple users(200-300). How it can be possible with FMS and Flex?
View 3 RepliesI have a video player working just fine with one video, steaming and using dynamic stream switching on a flash media server.Now I want to have more videos.I want to start using SMIL files for the dynamic switching list for each video.If you do not know what a SMIL file is you probably can not help.
Anyway how do I point to a SMIl file instead of just listing the streams.here is how I do my list at the moment
var dsi:DynamicStreamItem = new DynamicStreamItem();dsi.addStream( "mp4:GeneralReel_512x375_BR300_CBR_A96_Prog_1KFPS.f4v", 300 );dsi.addStream( "mp4:GeneralReel_512x375_BR600_CBR_A96_Prog_1KFPS.f4v", 600 );dsi.addStream(
[Code]...
As titled, what is the way to record video/audio files using Flash Meida Server through rmtp, and allow users to access the recorded files through http?What I am trying to do, is to record a user's microphone's input and save it to the server.fterwards, I would like other users to be able to access the recorded files and mainuplating the audio data, by computeSpectrum(), to do some visualization of the audio. As I know computeSpectrum() cannot work on streaming files, so I think I need to access the recorded files using http instead of rmtp. Is that true?
View 1 RepliesWhat would be some top reasons an FLV will not stream with Flash Media Streaming Serve 3.5? I ran the FLVcheck.exe on the FLV and it passed; however, the FLV will not stream. If I could just get some good reasons that would cause an FLV from streaming I think that will give me a good starting point for troubleshooting.
[Code]....
I need urgently to build simple streaming live video web application.i need to create some live video streams from webcamin one computer through my server to webcam in another computer is Adobe Flash Media Streaming Server is able to do it or only Adobe Flash Media Interactive Server is able to do it?if Adobe Flash Media Streaming Server is able to deal with live video streams is there any major difference between them like for example is it possible to record live video streams in Media Streaming Server? The only clear difference between them is the price.I can afford baying the Media Streaming Server bat not the Media Interactive Server and i need to decide before i am turning to other very less quality java based solutions.
View 1 RepliesI want to have a website where users can record short video clips (using a webcam) and then have those videos saved on the FMS for viewing later. I've seen a lot about streaming video, but I actually want to save the video.
View 1 RepliesI,am using FMS 3.5 to stream video over internet.This video will be a part of a website www.mywebsite.com . I have the webserver in my company. This webserver has the local LAN IP : 192.168.10.19 which is binded with a public internet ip 212.77.xx.xx .This website is hosted using IIS 6.0 on OS windows 2003 server with SP2.I created a swf name sample.swf from sample.flv file and gave it the rtmp address as follows: url...is the instance on the server, and 192.168.10.19 is the LAN IP of server) ,and it worked fine and every one within the local company network could see the streaming video. Now i tried to replace this local address with the public address and the address became as follows: url...After giving this public IP in the rtmp address i,am getting a message "Failed to load Flv from the address url...and as as result the video is not streamed and it only shows the progress bar on the link url... without loading the video. I have also checked the ports 80,1935,1111 on the server and they are open. Is there any problem with my rtmp address with public IP or any other reason ??
View 7 RepliesI've tested an exciting tutorial about streaming live video with Flash Media Server 3.5..every thing went good and i could see my webcam broadcast from my machine through my web site but unfortunately.I can't see it from any other machine.I'm using Microsoft windows XP SP2and flash media live encoder 3but my web server run UNIX is this a problem?
View 15 RepliesI thought Flash could play a video without having it not fully loaded first. (even on a normal server)
My SWF is calling the video from the server (I mean the video is not embedded in the SWF but is on the server space) My problem is that the SWF seems to download the video in full before playing it.