I'm setting up my fmis to deliver video through rtmp and http.I'm on a locked down network.What ports need to be open to allow people outside of the network to access the rtmp/http streams? I am correct to say only port 80 and 1935?
View 1 RepliesI have a case where I'm displaying 3 videos simultaneously using FMIS 3.5. When one is selected it will play the other two will switch and show a videoloop.
What is the proper way to accomlishing this. I actually have 6 videos (3 loops and 3 videos). Do I need a netconnection/netstream/video object for all of them or can they share something. What is the best practice?
i am new on steaming & flash server; when we try to use RTMP over HTTP the outside client gets the internal IP address of the FMS server instead of the NAT one or public IP address, how can we solve this.
View 1 RepliesI have read some forums posted in here and also searched the web extensively but cannot find a clear answer or get HTTP tunneling to work with Flash Media Server 3.
Q1: Can Flash Media Server 3 be configured for RTMP and HTTP tunneling to work? The reason I need to know if this will work is due to more and more clients are reporting that videos are not playing for them and I have determined that these clients are sitting behind a firewall that has port 1935 blocked. So I would like to configure the FLV playback control to try to stream the file over RTMP and if that does not work, use HTTP.
Here is my asctionscript that I have tried to get this to work, but it does not. Some other notes are, the .FLV files live in this folder: D:AdobeFlash Media Server applicationsvodmedia The videos are recorded and then converted into .FLV files and loaded into this folder. The ultimate solution is I use a FLVPlayback control and pass the location and .FLV file name on the query string "Details.aspx?VIDEO=rtmp://216.203.12.15/vod/flv". I have pasted the object code * to show this example below the asctionscript.
[Code]...
I am not able to play video on mobile device which is .3gp container and H.263 / AMR_NB encoded. I just want to play my website videos in mobile device also just like[url]....I want to use RTMP and HTTP both. My requirement is as follows - Which codec and container will be best? Should I use FLV to play video on mobile device? RTSP required or can be use RTMP? Is NetStream and NetConnection methods different from Flash Player in Flash Lite Player? How to play 3gp video using RTMP stream ie.ns.play(mp4:mobilevideo.3gp¯, 0, -1, true) is it ok or any thing else required? For mobile browser and computer browser,can I use single player or I have to make different player for computer browser and mobile browser? It would be better if I can do it with single player for both mobile and computer browser. Sample code required for testing. If you can.I got below article in which they mention that we can play video 3gp container in mobile also.
View 2 RepliesIs anyone familiar with the function of the Flash Media Server where it can detect a user's connection speed and deliver the appropriate quality version of the video on the user bandwidth detection?
View 1 Repliesi have installed flash media server 3.5 ..windows vista and using FLASH 10right now in Flash Media Server page I am only able to play HTTP sample,RTMP file is not working , i check the sample folder >> and open HelloWorld >> that shows error :: Error #2044: Unhandled NetStatusEvent:. level=error, code=NetConnection.Connect.Failedat HelloWorld/connectHandler()what should i do now need ur help urgent
View 5 RepliesI am connecting FMS over RTMP from a firewalled network where RTMP is blocked.Connecting to my FMS server from there takes (a too long) one minute before the Flash client switches from RTMP to encapsulated RTMP into HTTP.Is there any way to by pass this delay or is it a plug-in inner behavior that cannot be short-cut ?
View 3 RepliesI can get which part of file in bytes is loaded using videoDisplay component for RTMP protocol for VOD, I can get the current playing position using videoDisplay.playheadTime. But I want to know how many seconds of video are already loaded (not the length of bufferTime, which remains constant). i used videoDisplay.bytesLoaded when using RTMP it returns nothing ,if we uses HTTP it displays number of bytes loaded
The loaded size in bytes is not directly proportional to running time of the video, and while using rtmp im unable to get bytesLoaded too, how i can calculated the Video already loaded.
I want to deliver HD Video in different bitrate based on enduser's bandwidth.Also enduser should able to change the bit rate like 200p, 700p, 1500p.
View 1 RepliesHere one problem i put http server that is connecting and playing video,
But rtmp server connected but video not comming.
[Code].....
I'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
Some users are unable to access any of our video content, getting a Server Not Found error.We have our FMS configured to use ports 1935, 433, 80. Our firewall is allowing RTMP traffic to each of these ports. Is there something more I can do from my end to make sure users can access our FMS?
View 1 RepliesI want to take a long video and only play a specific segment of it, based on user selection. Can this be done with FMIS?
View 2 RepliesI have this standard embed code to play my video:
<object height="409" width="600"><param name="movie" value="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf" /><param name="flashvars" value="src=rtmp://my-server/vod/flv:my-video" /><param name="allowFullScreen" value="true" /><param name="allowscriptaccess" value="always" /><embed allowfullscreen="true" allowscriptaccess="always" flashvars="src=rtmp://my-server/vod/flv:my-video"
[Code]...
As titled, what is the way to record video/audio files using Flash Meida Server through rmtp, and allow users to access the recorded files through http?What I am trying to do, is to record a user's microphone's input and save it to the server.fterwards, I would like other users to be able to access the recorded files and mainuplating the audio data, by computeSpectrum(), to do some visualization of the audio. As I know computeSpectrum() cannot work on streaming files, so I think I need to access the recorded files using http instead of rmtp. Is that true?
View 1 RepliesI am developing an application in Flash that runs locally and it uses FMS 4.01, locally. I have been using adobe FMS 4.01 for months with no problem. Today I cannot connect to my server and I cannot even play the sample video on the Flash Media Server Start Screen. The sample video for the http plays after I changed the permissions for flash, but rtmp does not play. I have reinstalled the server; 3.5, 4.0 and 4.01, none of them will connect to rtmp. I receive this error on the flash media server start screen that says "the connection timed out".
View 1 Repliestoday I install fms3.5 on my pc.
1)I can use rtmp://localhost/vod/mp4:sample2_1000kbps.f4v , it works ok. But when I use rtmp://192.168.8.3/vod/mp4:sample2_1000kbps.f4v, I got Netconnect.connection.rejected. 192.168.8.3 is my fms server IP.
2)When I set fms use port 1935 and 80, rtmp://192.168.8.3/vod/mp4:sample2_1000kbps.f4v works ok on other pc. But using wireshark(Wireshark is a network protocol analyzer for Unix and Windows.) I found , the flash player connect 1935 port at first, it send "connect",the server replay "connection.rejected" and "no scope "vod" on this server". Than it connect to 80 port, so I see the video is not send throw 1935 port with rtmp, but throw 80 port with rtmpt. Why? How can I see video throw rtmp?
Same file streamed from FMS4 (same on 3.5) with rtmp protocol has very poor quality compared to real file quality. Is there some low level configuration to do on Flash Server? Is the streaming server making some kind of transcoding before sending the stream? Or it can be Flash Player? Tried unchecking "hardware acceleration" but nothing changes. I am on a local gigabit network, so no network bottlenecks. Video seems very pixelated on the edges (not soft/antialiased). These are the file details:
[CODE]....
I just installed Flash Media Server 3.5 and was trying to verify my installation. When I try to 'Verify progressive download over HTTP' as given in [URL] i am able to 'View a sample video' on start screen but when i try 'View your own video' i get this message on the player "Connection Error. Please press Play to try again."
View 10 RepliesWe recently purchased FMS4 and I'm in the midst of setting it up. However, not that it's a HUGE deal, but....
I see conflicting answers in the forums about whether or not it is possible to stream media in the HTML5 <video> tag (going back to early 2010).
Ideally, I'd like to stream (most of the time using flash), but for the specific browsers that support it, (chrome, ff, IE9, and select iOS devices) HTML5 video tags.
So, can FMS 4 do that?
<video id="something" controls="controls">
<source src="http://video.mydomain.com/vod/myMovie.mp4" type='video/mp4; codecs="avc1.42E01E, mp4a.40.2"' />
[Code].....
If so, how? I gave it a shot using the above code (minus the "blah, blah, blah" ), and the video doesn't play - if all it is, is a syntax error, then please be so kind as to provide the correct syntax.
However, if it isn't possible unless you download something else, like the File Packager for HTTP Streaming or the Origin module for HTTP Dynamic Streaming..
I had FMS 3.5 developer package installed on my server installed about a month ago. I used to be able to go to the /webroot/ page to see the sample RTMP video play and it worked great. Today, I go to view that page and find that it no longer plays. I get "Connection Error. Please preee Play to try again."
Pressing the play button does nothing, so I click the RTMP thumbnail and it reloads ony to give me that same error again. I can click the HTTP thumbnail and see the video play just fine. But, I want RTMP and after over an hour on the phone with my managed hosting tech, we can't find anything wrong.
Here's the thing: I haven't done anything, I have not changed anything, I have not manipulated the server software whatsoever. It just stopped working and gives me "Connection Error."
[Code]...
if I repeat this IIS topic, I couldn't find the answer to my problem any where on the internet. I installed FMS Dev 3.5 on Win 2003 Server with IIS 6.0 enabled. I don't have any issue with port 80 Listening, I used the IP address 192.168.0.21 for my web application (IIS) and 192.168.0.22 for FMS (I only have one network card and port 1935 is open under firewall). I can play the sample videos (RTMP, HTTP, and Dynamic Stream) using the Flash Media Start Screen (or from the location C: Program FilesAdobe Flash Media Server 3.5webrootindex.html) without any problem.
I then modified the IIS Default Website to look at the "webroot" folder (C: Program FilesAdobe Flash Media Server 3.5webroot). From IE, I can access the default web site by enter http://192.168.0.21/index.html. The website loads up correctly, and the RTMP video is playing perfectly. However, if I click Play Video (HTTP) or Dynamic Stream (tab), I receive "Connection Error. Please press Play to try again." I look at the log file (access.01.log) and see the error log "Session disconnect
[Code]...
I want to use RTMP based HTTP DVR functionality and HLS based IOS functionality, So I need to know how to MPP from my existing DVR app to the livepkgr app so that the stream being recorded at the DVR app can be used by the Flash and Stream MPP over to livepkgr app and can be used by the IOS HLS.
View 1 RepliesHow can I send some data to ALL peers via p2p-network?I tried using netgroup.post() but not all users recieved this messages.Then I tried to get peers to resend ( via post() ) all the data they have received - this works well, but produces large amounts of additional traffic for all peers (3Ń…-5Ń… and more)Is there a way guaranteed to deliver a message from the server to all peers? (not sending data from a server directly to each peer)
View 7 Repliesi have a mission to deliver some SWF compiled in a third party application to iOS system. i install FMS 4 streaming edition and now try to send a path to my SFW like parameter to my player. but it doesn't want to play it.
View 2 RepliesI have upgraded from FMS2 > Flash Media Interactive Server 3.5 I added both the seriel number for FMS3 and FMS2 during the installation process. When I logged onto the admin panel there was no licence listed, and a link saying "to upgrade to unlimited connections now, click here".
So, I checked the fms.ini and no seriel was there. I put the seriel number in and restarted the server through the FMSadmin tool. Still, no licence file was showing. I then added the licence file via the admin panel and got a dialogue saying "Seriel Key "blah" Sent To The Server for approval". The seriel key now appears with a valid status of false. And no further progress after that. The documentation states that when you add the seriel key in this manner it should recognise it immediately.
Can anyone suggest what I might have done wrong? I have trebble checked the seriel number, and copied and pasted it to make sure it is exactly right.
As stated in the title, I want to know how to determine if my server/host has native bandwidth detection. I have FMIS 3.5 installed on my Linux server. Is this a setting in FMIS or is this something I have to call my host to find out?
View 5 RepliesI recently upgraded from FMS 2 - FMIS 3.5.Over our internal network videos stream like a dream!However, accessing them from outside our own network means that they take about 20 seconds to load, or sometimes just get a message saying the server isn't found.This wasn't a problem with the FMS2 and there have been no changes to firewall settings or anything like that since the old server was up and running without problems.I have the new server set to use exaclty the same ports, but wonder if there are some other settings which could be causing this?Networking isn't really my area of expertise, and I have no idea where to start looking to improve things.
View 2 RepliesI'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.