Media Server :: Rtmp Not Connecting - Sample Video Not Streaming
Nov 22, 2010
I am developing an application in Flash that runs locally and it uses FMS 4.01, locally. I have been using adobe FMS 4.01 for months with no problem. Today I cannot connect to my server and I cannot even play the sample video on the Flash Media Server Start Screen. The sample video for the http plays after I changed the permissions for flash, but rtmp does not play. I have reinstalled the server; 3.5, 4.0 and 4.01, none of them will connect to rtmp. I receive this error on the flash media server start screen that says "the connection timed out".
I had FMS 3.5 developer package installed on my server installed about a month ago. I used to be able to go to the /webroot/ page to see the sample RTMP video play and it worked great. Today, I go to view that page and find that it no longer plays. I get "Connection Error. Please preee Play to try again."
Pressing the play button does nothing, so I click the RTMP thumbnail and it reloads ony to give me that same error again. I can click the HTTP thumbnail and see the video play just fine. But, I want RTMP and after over an hour on the phone with my managed hosting tech, we can't find anything wrong.
Here's the thing: I haven't done anything, I have not changed anything, I have not manipulated the server software whatsoever. It just stopped working and gives me "Connection Error."
i have installed flash media server 3.5 ..windows vista and using FLASH 10right now in Flash Media Server page I am only able to play HTTP sample,RTMP file is not working , i check the sample folder >> and open HelloWorld >> that shows error :: Error #2044: Unhandled NetStatusEvent:. level=error, code=NetConnection.Connect.Failedat HelloWorld/connectHandler()what should i do now need ur help urgent
I'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
Currently, we are streaming using RTMP, but I want to switch to HLS to allow iOS devices to stream our video. I do not want to encode two separate streams though because we are operating with limited bandwidth on mobile data cards. If I stream using the livepkgr, the delay to iOS devices is about 12 seconds which is OK. However, on desktop clients, we have live scoring integrated with our video, so we cannot have a delay that long. My question is, if I connect to the same stream in a Flash client for the desktop, will the delay still be that long? Or will it stream in real time to flash clients with the delay only for iOS devices using HLS? Also, am I correct in assuming that I can do this on 1 stream, or do I need to setup a separate stream for RTMP and HLS?
I have access to a flash media server on a CDN.I want to allow people to easily connect to this server. Currenty, they need to an additional software to connect to the FMS.It would be nicer if they could just connect to the server with their browser.So I assume I need to create a SWF file and connect from this file to the FMS (with Actionscript).The end result would look like the demo of the jquery webcam plugin, only that the SWF file would establish a connection to the FMS and stream the video to the FMS
I have some questions regarding 4.5 and deciding which version we must license (FMIS or FMS). Obviously there is a huge price difference and as this is within a local network we don't require encryption or multicast. Here is the scenerio we need to stream live DVR to mac, windows browser AND iPhone/iPad and devices running Android 2.2(Froyo)+. I need someone from Adobe to help us decide.
1. I see DVR is now listed as a feature in Flash media server page. Does that mean its no longer exclusive to Flash Media Interactive server. For both http streaming and RTMP? 2. Previously in order to stream live to Adobe dynamic streaming, Flash media interactive server was required because a live segmenter had to be used. Is this still the case? Or can we just launch adobe live media encoder (FLME) and stream to flash media server.3. Related to #2 can we switch between serving streams via RTMP or dynamic streaming without changing the format of the material on disk?4.I was at a webcast for 4.x and remember being told that the latency for http live dynamic streaming was 20 seconds because of the repackaging that had to take place. Is this still true? What is the latency for iOS playback from ingest to playback?5. For the iOS playback feature do the streams have to be in Adobe dynamic streaming format or can we just stream via FLME RTMP and trust it to do the right thing?6. Does the iOS playback support DVR?7. Does the Android plugin have good support for RTMP live streaming including DVR?
Am developing an application with Flex 4.5 & Flash Media Server. I need a visualization curresponding to the plaing track . It is possible with SoundMixer.computeSpectrum(bytes, true, 0) in case of progressive downloading. But not working with rtmp streaming. And also need audio wave curresponding to the track which is also working with progressive ownloading usinf Sound object.
The problem is a weird problem, because I can connect to the application through an RTMP test site, Adobe Flash Server reconginzes the connection and allows it. But when I try to connect from the flash applet (It's called Videowhisper), the connection doesn't go through. I was wondering if anyone knew what the problem is? I host Joomla (open source networking site) on a WAMP server, and Adobe Flash Server on the same machine. Adobe Flash Server is acception connections, just not from Joomla, for some reason.
I'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
I've freshly installed the FSM demo on a redhat linux box, and have everything working. From that start screen running on Local Host, I click the "Play video (HTTP)" and that video of a train shows up. Cool. But when I click the link above it ("Play Video (RTMP)") I get an error message: "Connection Error. press Play to try again." and no matter how many times I hit play, I get that same message. The Dynamic stream doesn't work either, and the Interactive sucessfully displays webcam feeds, but doesn't show the "Play Live Stream" button thing. Is there anything special you have to do to get the RTMP stuff working? Some special command or server you have to run?
Would firewalls intefere with things (I'm pretty sure there isn't one on the machine, but I'm flailing wildly here) or would permissions mess things up? I'm completely lost ^_^;; I guess I should also add that there doesn't seem to be any log files. I'm looking under the server install directory, and there isn't even a "log" folder. There isn't one under Apache, either. It confuses me. So far all I can find on the internet is instructions to look at the log files...but if they aren't there... Am I just looking in the wrong places, or are they just not being generated yet? I did a tcpdump with wireshark, and the web app IS pinging port 1935 (for RTMP), but the packets are failling the checksum and are refusing to be reassembled because of that. Is this making sense to ANYBODY?
I have some .mov files want to stream to Flash media server by ffmpeg. i have already tried to stream a single .mov by FFMPEG command in terminal and it works, the FMS can display the thing i streaming in live.Now i want to stream multiple files as one source, i tried to use above command one by one, but it seems Flash media server stop the streaming when file1 is finished, then start the stream with file2.It makes the stream player stopped when file1 is finish, and i have to refresh the web page in order to continue on file2.i am calling the FFMPEG command by a C program in linux, i wonder is there any method that i can prevent the FMS stopped when i switch the file source in FFMPEG? or is that possible to let FFMPEG constantly deliver the stream by multiple files source without stopped when a file finish
I am trying to publish a video to an RTMP Server but it doesn't publish. It might be a pre-release bug. I am able to play a NetStream but not able to publish one. Is there a sandbox issue? I'm not sure. Because, the FMS RTMP Server will not let a client connect unless it has been downloaded from the same host as the server (something like a sandbox condition)
I've placed some of my videos flv and f4v in the vod/media and webroot/vod folders with sample files provided. My files were checked with flvcheck and passed. When I load the embed code into a Dreamweaver HTML file and save the page to the webroot folder as instructed, the provided sample files play in my Firefox browser. However, when I edit the code to insert my files in strict accordance with the instructions concerning codecID and extension, I get the following message on the Browser "We are unable to connect to the content you've requested." My videos are less than 30 minutes in length and were encoded H.264 using Adobe Media Encoder and as I said passed the flvcheck.
(1) An ec2 instance with an SWF on it - this SWF plays streaming video - i.e. is a video player like JWPlayer (2) A streaming video distribution set up via Cloudfront
If I stream the the video via RTMP from Cloudfront to the SWF (which is on ec2) - would I incur charges for data transfer into the server (i.e. for data being read by the SWF) and out of the server (i.e. for data being displayed by the SWF to the user) on account of streaming the video to users (assuming that data transfer into and out for the server is being charged for)?
is it possible to use Video Phone (Cirrus Sample Application) with FMS4?It seems to be possible because in Video Phone source can be found these text: rtmfp server address (Adobe Cirrus or FMS)[Bindable] private var connectUrl:String [code]
if I repeat this IIS topic, I couldn't find the answer to my problem any where on the internet. I installed FMS Dev 3.5 on Win 2003 Server with IIS 6.0 enabled. I don't have any issue with port 80 Listening, I used the IP address 192.168.0.21 for my web application (IIS) and 192.168.0.22 for FMS (I only have one network card and port 1935 is open under firewall). I can play the sample videos (RTMP, HTTP, and Dynamic Stream) using the Flash Media Start Screen (or from the location C: Program FilesAdobe Flash Media Server 3.5webrootindex.html) without any problem.
I then modified the IIS Default Website to look at the "webroot" folder (C: Program FilesAdobe Flash Media Server 3.5webroot). From IE, I can access the default web site by enter http://192.168.0.21/index.html. The website loads up correctly, and the RTMP video is playing perfectly. However, if I click Play Video (HTTP) or Dynamic Stream (tab), I receive "Connection Error. Please press Play to try again." I look at the log file (access.01.log) and see the error log "Session disconnect
I try to establich the connection with asc file from applications/videochat $connection_string="rtmp://videochat/"; And I'm getting the result from media server Connecting to the video server...>>The client does not have permission to connect to the application, or the application expected different parameters from those that were passed.>>The connection was closed successfully
I'm setting up my fmis to deliver video through rtmp and http.I'm on a locked down network.What ports need to be open to allow people outside of the network to access the rtmp/http streams? I am correct to say only port 80 and 1935?
Flash media server 3.5 to stream live video to a webpage with flex GUI embedded in it.For this I have used Adobe flash media server start screen .I could able to stream video correctly.I want to know how long it could be do like this.ie suppose I have to stream like this for 3 or 6 months
Writing RTMP Streaming Server for streaming AVC+AAC video. And it works fine with rtmpdump. But I can't force it to work in flowplayer and other flash video players.The message sequence after handshake is similar to FMS / RED5 / erlyvideo / haxevideo servers: I've tried a lot of variations.
From Chrome debug console I can see, what all negotiating messages passed to the flowplayer. The last one is onMetaData. And after this the working sample (rtmp://flash.tvwmedia.net/LiveVideo//Live300) gets NetStream.Buffer.Full. And streaming from my server don't get it.
I'm starting with AVC Header message, containing sps/pps. After it first AVC picture passed. After - AAC header and AAC sample. And then AVC/AAC samples. This dumped OK by rtmpdump - I have working flv on exit. But flowplayer and others does not work.
1)I can use rtmp://localhost/vod/mp4:sample2_1000kbps.f4v , it works ok. But when I use rtmp://192.168.8.3/vod/mp4:sample2_1000kbps.f4v, I got Netconnect.connection.rejected. 192.168.8.3 is my fms server IP.
2)When I set fms use port 1935 and 80, rtmp://192.168.8.3/vod/mp4:sample2_1000kbps.f4v works ok on other pc. But using wireshark(Wireshark is a network protocol analyzer for Unix and Windows.) I found , the flash player connect 1935 port at first, it send "connect",the server replay "connection.rejected" and "no scope "vod" on this server". Than it connect to 80 port, so I see the video is not send throw 1935 port with rtmp, but throw 80 port with rtmpt. Why? How can I see video throw rtmp?
I have to a problem using the Flash Media Interactive Server Feature Explorer. I want use the sample: RecordStream. I can see the instance "RecordStream" in console FMS 3.5. and show me the video in app AIR, but does not save the .FLV in my server.
Same file streamed from FMS4 (same on 3.5) with rtmp protocol has very poor quality compared to real file quality. Is there some low level configuration to do on Flash Server? Is the streaming server making some kind of transcoding before sending the stream? Or it can be Flash Player? Tried unchecking "hardware acceleration" but nothing changes. I am on a local gigabit network, so no network bottlenecks. Video seems very pixelated on the edges (not soft/antialiased). These are the file details:
to generate thumbnails of the streaming video to control de contents of the video streaming. Could I do that in the server side?There is any setting to do that? Could I use the getOnMetadata method to catch a bitarray and then put in into a bitmap file?
I am looking to broadcast live video and need a camera that is better than a simple webcam. It looks like they used to make video cameras that would register as webcams, but stopped making them.If you wanted to broadcast an event live, what would be a good camera to use?
