is it possible to use Video Phone (Cirrus Sample Application) with FMS4?It seems to be possible because in Video Phone source can be found these text: rtmfp server address (Adobe Cirrus or FMS)[Bindable] private var connectUrl:String [code]
View 6 Replieswhere is the source code for the multicastplayer sample that is located in <installed directory>AdobeFlash Media Server 4 oolsmulticastmulticastplayer directory? The StrobeMediaPlayer does not use the same html code and does not playback a rtmfp multicast stream.This is the code used in the multicast sample player to pass the manifest.f4m file into the player to playback a Multicast Stream which is not used in the StrobeMedia player sample.
var flashvars = {}; <!-- Add manifest file location e.g. flashvars.manifest = "manifest.f4m"; --> flashvars.manifest = "manifest.f4m"; <!-- Enable debugging --> <!-- flashvars.debug = "true"; --> <!-- Adjust buffer time  - default is 4 seconds --> <!-- flashvars.bufferTime = "10.0";
I have created an swf where I can record the webcam picture as H264 video to a FMS 4.5 (I am using the developer version).My code is looking like this:
var h264Settings = new H264VideoStreamSettings();
h264Settings.setProfileLevel("baseline", "1.2");[code]....
I can then replay the video from FMS just fine, but if I try to copy the video from the FMS application directory into a local project and try to play the video with the FLVPlayback component, or with the Adobe Media Player, it is not playing at all.Is this to be expected? Can't I record a webcam video with FMS in H264 and use that video later without FMS?
I've placed some of my videos flv and f4v in the vod/media and webroot/vod folders with sample files provided. My files were checked with flvcheck and passed. When I load the embed code into a Dreamweaver HTML file and save the page to the webroot folder as instructed, the provided sample files play in my Firefox browser. However, when I edit the code to insert my files in strict accordance with the instructions concerning codecID and extension, I get the following message on the Browser "We are unable to connect to the content you've requested." My videos are less than 30 minutes in length and were encoded H.264 using Adobe Media Encoder and as I said passed the flvcheck.
View 1 RepliesI am developing an application in Flash that runs locally and it uses FMS 4.01, locally. I have been using adobe FMS 4.01 for months with no problem. Today I cannot connect to my server and I cannot even play the sample video on the Flash Media Server Start Screen. The sample video for the http plays after I changed the permissions for flash, but rtmp does not play. I have reinstalled the server; 3.5, 4.0 and 4.01, none of them will connect to rtmp. I receive this error on the flash media server start screen that says "the connection timed out".
View 1 RepliesI am using Flash Media server 4.5 and i read the tutorial if i want to stream the live feed, i may need to use the media live encoder.
but what i found in media encoder is i have to manually setup everything and it only support camera devices. But in my case i have multiple video files keep received from another program and place it on file system (server),my goal is use the Flash Media server to perform a live boardcasting with these video file one by one. That means when client watching a live streaming, they will not notice the server is playing mov1, then mov2, then mov3, then mov4... and so on.
You can imagine i am trying to boardcast a live footage say for 60sec, but the video file will not recorded entirely after 60sec, instead for every 10sec i will save a new video file, so that when client watching the live by HLS [URL]when the time reach to 10sec, a mov1 video file available and FMS should boardcast this video on live123.when the time reach to 20sec, a mov2 video file available and FMS should Immediately follow the mov1 boardcast on live123.and so on...Also can FMS dynamically create a new streaming session (invoke by code), so that when client A uploading some video files to the server, the FMS open a new streaming session only stream cilent A video files?the configuration to boardcasting like screen size, bit rate, etc should be pre-defined on the server. [URL]
if I repeat this IIS topic, I couldn't find the answer to my problem any where on the internet. I installed FMS Dev 3.5 on Win 2003 Server with IIS 6.0 enabled. I don't have any issue with port 80 Listening, I used the IP address 192.168.0.21 for my web application (IIS) and 192.168.0.22 for FMS (I only have one network card and port 1935 is open under firewall). I can play the sample videos (RTMP, HTTP, and Dynamic Stream) using the Flash Media Start Screen (or from the location C: Program FilesAdobe Flash Media Server 3.5webrootindex.html) without any problem.
I then modified the IIS Default Website to look at the "webroot" folder (C: Program FilesAdobe Flash Media Server 3.5webroot). From IE, I can access the default web site by enter http://192.168.0.21/index.html. The website loads up correctly, and the RTMP video is playing perfectly. However, if I click Play Video (HTTP) or Dynamic Stream (tab), I receive "Connection Error. Please press Play to try again." I look at the log file (access.01.log) and see the error log "Session disconnect
[Code]...
I had FMS 3.5 developer package installed on my server installed about a month ago. I used to be able to go to the /webroot/ page to see the sample RTMP video play and it worked great. Today, I go to view that page and find that it no longer plays. I get "Connection Error. Please preee Play to try again."
Pressing the play button does nothing, so I click the RTMP thumbnail and it reloads ony to give me that same error again. I can click the HTTP thumbnail and see the video play just fine. But, I want RTMP and after over an hour on the phone with my managed hosting tech, we can't find anything wrong.
Here's the thing: I haven't done anything, I have not changed anything, I have not manipulated the server software whatsoever. It just stopped working and gives me "Connection Error."
[Code]...
I have to a problem using the Flash Media Interactive Server Feature Explorer. I want use the sample: RecordStream. I can see the instance "RecordStream" in console FMS 3.5. and show me the video in app AIR, but does not save the .FLV in my server.
View 6 Replies'URL missing from Media tag' on FMS4.5 HTTP Live Stream playback.I have spent a whole day trying in vain to publish f4m live http streams from FMLE using FMS 4.5, and almost everything I try results in the error .The F4M document contains errors URL missing from Media tag...in both Flash Media Playback and the fms videoPlayer app.Other people seem to have seen this and solved it, but I've found nothing that helps. I have tried to publish a single stream, and with multiple bitrates. For the latter, I followed the Adobe video tutorial as follows:
Multiple bitrate live
================
I'm publishing 3 streams from FMLE, using
FMS URL: rtmp://[serveraddress]/livepkgr[code]..........
I have developed an application with fms3.5.3 and there is some latency problem so my client is looking peer to peer communication "FMS4" with video recording, how is it possible
View 1 RepliesHow can i send webcamera stream to FMS4 by UDP. i need the UDP speed and the server ability to save the audio/video confirence
View 3 RepliesThe player that ships with FMS4 seems to be the only player that works for IP Multicast in FMS4. Does anyone know where it's source code lives? I've tried RealEyes and StrobeMedia sample players but those are not working on a Mac
[Code]...
I have problems recording audio using FMS4 on Windows 2008 R2.I have an old server, it's a Windows XP with FMS 3.0.2 that is working perfectly but now we're upgrading the server to Windows 2008 R2 with FMS4.I'm trying on my developpen enviroment with FMS4 Developper Version (Trial).Using the same program (AS3) to record audio that works on my old server.
I got this traces on Flash: NetStream.Record.NoAccessNetStream.Buffer.EmptyNetStream.Buffer.EmptyNetStream.Buffer.Empty
...
This are my settings after intalling.Port 1935 (didn't add port 80 because it's being use by IIS).Set "LIVE_DIR = C:Program FilesAdobeFlash Media Server 4webrootlive_recorded" on "C:Program FilesAdobeFlash Media Server 4conffms.ini
Set the "applications" folder's permission to "Everyone" to "Full control"Diabled Firewall
Even tried setting the "Flash Media Server 4" folder's permission to "Everyone" to "Full control".
I have recently purchase and insalled FMS4.I have created several .FLV video files and (.MP4 h264 files for failback for those who would like to view the videos from iOS devices).I have the .FLV files working great on the streaming player (Longtail) using RTMP.My player allows for a failback to .MP4 version of the video for 'Progressive Download' and 'Download'.I understand that HTML5 will not work with RTMP.Is there a way to house these .MP4 files on the FMS and serve them using HTTP from the FMS?Is there an area within FMS that allows HTTP serving?I read something awhile back about setting up Apache Server HTTP to serve the videos.Is this feasble or I'm I better off just putting the files on my web server and linking to them there?Can someone give me some advice on best practices when using failback for HTML5 videos in cases where flash in not available?
View 1 Repliesi've done an as3 application that record a video stream (webcam) with fms4. The problem is that the files generated have a weight of only 1kb.[code]
View 2 Repliesi have a iis need 80 port so how to change default port 80 in fms4.5
View 1 RepliesParden me if this question was asked earlier. While installing FMS i have entered the port numbers 1935,100 instead of normal 1935,80 as i already have wamp in my default port 80, but when i try to call the localhost url, both the port [URL]..
View 2 RepliesI just set up a new copy of the official Adobe Amazon Machine Image for FMS4.One show stopper: it seems to require a license key in fms.ini, just like any other FMS4 install.The master log file has "invalid license key" in it. We tried giving it the "Activation key" no dice.There's a license directory in /opt/adobe/fms with 3 .bin files.We tried entering the path to that directory for the license no dice.The docs don't say anything about it.I've spent over 3 hours being transferred around Adobe and listening to elevator music(code).........
We can't login to the Admin Console. After we enter credentials and click login. Error message comes up. "A script in this movie is causing Adobe Flash Player 10 to run slowly. If it continues to run, your computer may become unresponsive. Do you want to abort the script? "if we say no, it comes back. If we say yes it aborts script but we never login to admin console.
FMS is running fine, it just seems to be the flash movie that can't open. We have set it up to allow each website we are running to have its own application. since we have 1500+ applications running, we think this might be the issue. Can someone let us know if there is a application limit per server running FMS and/or should we take the 1500 websites and have them all share the same application?
I have a basic video on demand app running on Flash Media Interactive 3.5. I've noticed that in our flowplayer page, in order to view the contents I have to set the netconnectionurl to be the address to the app, and then the file name url needs to contain the rest of the path.
For Example:
NetConnectionURL: rtmp://myserver.edu/appname/
Url: path/to/file/many/folders/deep/video.mp4
However - I have accessed the same file from a different server using the following:
NetConnectionURL: rtmp://myserver.edu/appname/path/to/file/many/folders/deep/
Url: video.mp4
What type of VOD application or settings need to be configure to allow the later example to work?
I have created a video chat application using Flash Media Server, Its working well in Local, But not in FMS (If I connect with my FMS account). But Text Chat working well, pbm in Video only My server is from influxis with Bandwidth 1 mbps, But My application got 13 mb totally, It is any pbm in the server, I'm very newbie to FMS, so excuse my silliest question and explains if its.
View 9 RepliesI want to create a video chat application between 2 people and I want to record the dialouge between the two people to one audio file, so both of then can play back the dialouge at a later time.
View 1 RepliesI have to build a video conference application with flex 3.
View 1 RepliesI am not able to locate sample implementation (sources) for LiveSample.swf in FMS 3.5. Can somebody point it to me?
View 4 RepliesI have bee trying to stream to mobile phones.. I have installed flash lite on the phone, I dont know what to do
View 1 Repliesi have installed flash media server 3.5 ..windows vista and using FLASH 10right now in Flash Media Server page I am only able to play HTTP sample,RTMP file is not working , i check the sample folder >> and open HelloWorld >> that shows error :: Error #2044: Unhandled NetStatusEvent:. level=error, code=NetConnection.Connect.Failedat HelloWorld/connectHandler()what should i do now need ur help urgent
View 5 RepliesI am developing Video Chat over Ip (including audio and text too). But I am unable to get the proper startup material for my desktop application.
View 2 RepliesI've build a live video/audio chat application. All works fine only the issue is latency of 5 secs. I'm using FMS 3.5 and FLEX.
View 1 RepliesI am developing peer to peer video conference application with FMS4 but there is some latency problem.
View 1 Replies