Media Server :: Build Video Conference Application In Flex 3.0?
Jun 5, 2010I have to build a video conference application with flex 3.
View 1 Replies
Similar Posts:
Flash :: Media Server - Voice Conference Application With Many Users
Dec 21, 2010We need to develop a flash voice conference application with using flash media server. The number of connections can be up to 20,000. is it possible with flash media server. Can it also possible with Peer to Peer. If we use flash media server what configuration needed for.
View 2 RepliesMedia Server :: Record 2 Way Video Conference
Apr 9, 2012Is it possible to record 2 way conference in a single file? I can record conference separately for both perticipents but can not record as a single recording file.
View 1 RepliesMedia Server :: Disable Buffer For Video Conference?
Aug 27, 2011I'm new to all this, so please forgive my lack of knowledge My purpose of this is to do high quality video conference. I've set up flash media server, and installed media encoder on another computer, input and output looks very much the same, but on the media player, it has about 1 second delay even on LAN,
is this because of the buffer of the flash player? how can i disable buffer completely?
Media Server :: FLASH Video Conference Large Scale Over 100k Simultaneous Connections
Mar 1, 2010I am involved in project managment for a large video conferncing project involving over 100k simultanous connection and most likely to be increased 4 times by next six months.While figuring out the scalability area ,it was concluded that smart selection of hardware and origin-edge clustering will be suited most. Well while studying this documentation says it supports thousands of calls but unfortunately I could not determine the actual numbers. Can you tell me how many edge server will be needed for 100k simultanous calls/number of sessions per edge server and will we need license (4500$) for each edge server?
View 2 RepliesFlex :: Create Video Conference And Red5 Server?
Dec 8, 2009How can I create video conference with flex in client side and using red5 media server on server side?
View 2 RepliesFlash :: Media Server :: Setting Up A Flash Video Conference Website
May 2, 2011I am an ASP.Net/C# developer interested in setting up a Flash Video Conference web site.
View 3 RepliesMedia Server :: Live Video/audio Chat Application - Latency Time Using FMS 3.5 And FLEX
Dec 9, 2010I've build a live video/audio chat application. All works fine only the issue is latency of 5 secs. I'm using FMS 3.5 and FLEX.
View 1 RepliesMedia Server :: Video Chat Over IP Using Flex IDE And Flash Media Server For Live Streaming Video And Audio?
Feb 15, 2011I am developing Video Chat over Ip (including audio and text too). But I am unable to get the proper startup material for my desktop application.
View 2 RepliesPhp :: Make Video Conference Application In HTML 5?
Jan 9, 2011How to make Video conferencre application in HTML 5 ? actually i want to build web conference application using HTML5.
View 3 RepliesMedia Server :: Achieve Multi-party Audio Conference With FMS?
May 17, 2010I need to design a Flash based web conference service. One requirement is it should allow multiple users to speak concurrently like a normal conference call facility does. However, I'm wondering whether Flash has any support of such mechanism.Can multiple client publish their Mic object to the same stream hosted by the FMS and get mixed together there? Or, rather, I have to create multiple streams for each speaker to publish to respectively and instruct every audience to subscribe all of these sterams and do the mix on the receiver side?
View 2 RepliesMedia Server :: Video On Demand Application Oddness
Mar 30, 2010I have a basic video on demand app running on Flash Media Interactive 3.5. I've noticed that in our flowplayer page, in order to view the contents I have to set the netconnectionurl to be the address to the app, and then the file name url needs to contain the rest of the path.
For Example:
NetConnectionURL: rtmp://myserver.edu/appname/
Url: path/to/file/many/folders/deep/video.mp4
However - I have accessed the same file from a different server using the following:
NetConnectionURL: rtmp://myserver.edu/appname/path/to/file/many/folders/deep/
Url: video.mp4
What type of VOD application or settings need to be configure to allow the later example to work?
Flash :: Media Server - Created A Video Chat Application?
May 26, 2009I have created a video chat application using Flash Media Server, Its working well in Local, But not in FMS (If I connect with my FMS account). But Text Chat working well, pbm in Video only My server is from influxis with Bandwidth 1 mbps, But My application got 13 mb totally, It is any pbm in the server, I'm very newbie to FMS, so excuse my silliest question and explains if its.
View 9 RepliesMedia Server :: Create A Video Chat Application Between 2 People
Sep 2, 2009I want to create a video chat application between 2 people and I want to record the dialouge between the two people to one audio file, so both of then can play back the dialouge at a later time.
View 1 RepliesMedia Server :: Video Conferencing With Flash Media Server And Flex?
Nov 9, 2011what will be the best way for video conference without any delay for multiple users(200-300). How it can be possible with FMS and Flex?
View 3 RepliesMedia Server :: Possible To Use Video Phone (Cirrus Sample Application) With FMS4?
Jun 24, 2011is it possible to use Video Phone (Cirrus Sample Application) with FMS4?It seems to be possible because in Video Phone source can be found these text: rtmfp server address (Adobe Cirrus or FMS)[Bindable] private var connectUrl:String [code]
View 6 RepliesFlash :: Flex Video Conference App - Audio Vs Video
Jul 12, 2011I am using Flex and FMS to develop a video conferencing application. I am using DynamicStream to automatically switch incoming streams to the appropriate bitrate depending on the available bandwidth. I was wondering if there is anyway in which I can instruct the DynamicStream to allow more bandwidth for audio (obviously at the cost of losing some frames from the video).
View 1 RepliesFlex :: Video Conference/web Chat Using Red5?
Sep 20, 2010I have performance issues with my test web chat app - video playback is very slow on, around 1 frame per few seconds at 640x480, 15fps, quality: 90. Network usage is low (gigabit LAN), cpu's still have some headroom so it should be the software.
Quick description of my setup:red5 0.9.1; simple flash broadcast and subscribe derived from here [URL] and mr. accattato's videos; using oflaDemo on serverside.
Local image on the broadcaster is good.So far I guess flash broadcaster would be the most likely culprit, but here is my worst since I am new to flex. Red5 should not modify the stream I guess, and it doesn't make much sense for the subscriber to play only 1 frame per second.
Media Server :: RTMP & Flash Media Streaming Server Live Application?
Feb 3, 2010I'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
Media Server :: Fms 3.5.2 - Video / Audio Streaming Application - Audio Stops Or Lags Behind
Aug 25, 2009I ran a simple live video streaming application for the first time with actual users and ran into a couple of serious performance issues that had not turned up during testing. In this instance there was one video stream from a live web cam and used FMLE at 150 kbps using VP6 and MP3 @22k. There were 16 clients and everything worked pretty good for about 30 minutes. (although some clients said their audio and video were out of sync by up to 3 seconds)
Then individual clients would have either the video freeze or the video would continue and the audio would stop. These clints had to "disconnect" and then "connect" again to the application. This happened to all of the clients at one time or another for several minutes. I stopped and restarted the FMLE with progessively lower bandwidth settings down to 75 kbps but still clients were having the same issue.
I eventually stopped the FMLE and used the applications built in publisher at 45 kbps and that seemed to eliminate the freeze/dropping issue. But of course the video quality was very poor and some clients still reported that the audio was out of sync with the video. The server hosting the FMS application is a quad processor dell with lots of memory and network connectivity. The Flash Media Admin Console performance graph showed the total Bandwidth as 3 Mbps at maximum.
Flash :: Looking To Build A Video Serving Web Application?
Dec 2, 2010I want to build an application that will allow the user to upload a movie file, then allow the user to give information about the movie (like synopsis, title, etc.) so that he or she can watch it from the server at a later time. Almost exactly like a youtube clone, for all intents and purposes.
I'm running into a problem, however, with serving up the movie to be watched. I want the user to be able to watch the movie on a variety of different platforms, including over the web in all of the common browsers, on iOS devices and on Android devices (as well as GoogleTV in the future).
I had initially planned on having the user upload whatever file formats they want, store that file, then transcode it on the fly using ffmpeg (or something similar) to serve it up to whichever device is requesting it. This is handy, because I'd be able to transcode it to a smaller size if I needed to to save on bandwidth. Unfortunately, I'm having a tough time finding a method that will do this to display the movie in a web browser.
I've tried VLC to death. I'm able to get it to stream a video on demand over RTSP, but (as I understand it), both the HTML5 video tag and Flash won't accept an RTSP stream. I haven't had any luck finding a method of streaming an on-the-fly transcoded video over HTTP, which looks to limit my options to embedding either a windows media player or quicktime. FFServer with FFMpeg has the same problem; it can create an RTSP stream, but not an HTTP stream.
Flash :: Media Server - Send Video And Audio Data To A Media Server By Using RTMP Protocol
Jul 22, 2010I'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
Media Server :: Posible Fast Forward / Rewind Video In Flash Media Server?
Sep 23, 2011is it possible fast forward, rewind video in flash media server through flash action script ?
View 5 RepliesFlex :: Video - Webcam Recording With Flex Strictly Requires A Media Server (FMS - Red5 - Wowza)?
Jun 13, 2009I'm trying to implement a flex app that will be able to record a video from a webcam and then upload it to a server. I've only found tutorials and examples that require a media server running such as Red5, Flash Media Server and Wowza and an open rtmp stream to the server. However, I want to know if it's possible to record a video locally and then submit it to the server with a simple HTTP request. Is there a tutorial somewhere that shows how to do this? I'm really new in flex development
View 3 RepliesMedia Server :: Stream Video With Flash Media Live Encoder To The Server?
Jul 19, 2011when i try to live stream with FMS! I can stream video with Flash media live encoder to the server but when i create the player to recieve the livestream from server,i can not recieve the live stream,can anyone give me a step by step tutorial of how to do it?
View 1 RepliesMedia Server :: Application Is Not A Valid Signed Application Loading Access Denied
Oct 29, 2009We have an application that works no problems on our server with FMS in test mode. As soon as we enter our FMS license key we get this error: "application is not a valid signed application loading access denied".We removed the license key and it works again, but with user limits obviously, so this is not an acceptable fix.
View 5 RepliesMedia Server :: Play Live Video Stream With Flex?
Sep 23, 2010I'm trying to get Flex Builder 3 to play a live video stream with Flash Media Server and Flash Live Media Encoder.
I'm able to stream pre-recrorded (vod) flvs in flex from flash media server.
I'm able to stream live video using Flash/FMS/Flas Live Media Encoder, but not with Flex.
This code streams pre-recorded Video on Demand flvs, but not live streams:
If I change source to "rtmp://localhost/live/livesream.flv, I get nothing.
<?xml version="1.0"?><!-- controlsvideodisplayVideoDisplayFMS.mxml --><mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
<mx:HBox> <mx:Label text="RTMP FMS 2.0"/> <mx:VideoDisplay autoBandWidthDetection="false" source="rtmp://localhost/vod/Legend.flv"/> </mx:HBox></mx:Application>
Media Server :: Video Chat With Flash Media Streaming Server
Dec 12, 2010is it possible to built a Video Chat without the need for server side code so that I can run it on a Flash Media Streaming Server?
View 7 RepliesMedia Server :: Duration Of Video Streaming Using Flash Media Server 3.5?
Feb 16, 2011Flash media server 3.5 to stream live video to a webpage with flex GUI embedded in it.For this I have used Adobe flash media server start screen .I could able to stream video correctly.I want to know how long it could be do like this.ie suppose I have to stream like this for 3 or 6 months
View 2 RepliesFlash :: Application Which Can Relay Another Application On Media Server?
Oct 5, 2010Is there any application which can relay another application on Flash Media server? For exmaple I have a "live" application on the server. I want another application, "liverelay" which can basically relay what is coming on the "live" application. Is it possible? If so how can I implement it? Looking forward to a response.
View 12 Replies
