The player that ships with FMS4 seems to be the only player that works for IP Multicast in FMS4. Does anyone know where it's source code lives? I've tried RealEyes and StrobeMedia sample players but those are not working on a Mac
[Code]...
where is the source code for the multicastplayer sample that is located in <installed directory>AdobeFlash Media Server 4 oolsmulticastmulticastplayer directory? The StrobeMediaPlayer does not use the same html code and does not playback a rtmfp multicast stream.This is the code used in the multicast sample player to pass the manifest.f4m file into the player to playback a Multicast Stream which is not used in the StrobeMedia player sample.
var flashvars = {}; <!-- Add manifest file location e.g. flashvars.manifest = "manifest.f4m"; --> flashvars.manifest = "manifest.f4m"; <!-- Enable debugging --> <!-- flashvars.debug = "true"; --> <!-- Adjust buffer time  - default is 4 seconds --> <!-- flashvars.bufferTime = "10.0";
'URL missing from Media tag' on FMS4.5 HTTP Live Stream playback.I have spent a whole day trying in vain to publish f4m live http streams from FMLE using FMS 4.5, and almost everything I try results in the error .The F4M document contains errors URL missing from Media tag...in both Flash Media Playback and the fms videoPlayer app.Other people seem to have seen this and solved it, but I've found nothing that helps. I have tried to publish a single stream, and with multiple bitrates. For the latter, I followed the Adobe video tutorial as follows:
Multiple bitrate live
================
I'm publishing 3 streams from FMLE, using
FMS URL: rtmp://[serveraddress]/livepkgr[code]..........
I have developed an application with fms3.5.3 and there is some latency problem so my client is looking peer to peer communication "FMS4" with video recording, how is it possible
View 1 RepliesHow can i send webcamera stream to FMS4 by UDP. i need the UDP speed and the server ability to save the audio/video confirence
View 3 RepliesI have problems recording audio using FMS4 on Windows 2008 R2.I have an old server, it's a Windows XP with FMS 3.0.2 that is working perfectly but now we're upgrading the server to Windows 2008 R2 with FMS4.I'm trying on my developpen enviroment with FMS4 Developper Version (Trial).Using the same program (AS3) to record audio that works on my old server.
I got this traces on Flash: NetStream.Record.NoAccessNetStream.Buffer.EmptyNetStream.Buffer.EmptyNetStream.Buffer.Empty
...
This are my settings after intalling.Port 1935 (didn't add port 80 because it's being use by IIS).Set "LIVE_DIR = C:Program FilesAdobeFlash Media Server 4webrootlive_recorded" on "C:Program FilesAdobeFlash Media Server 4conffms.ini
Set the "applications" folder's permission to "Everyone" to "Full control"Diabled Firewall
Even tried setting the "Flash Media Server 4" folder's permission to "Everyone" to "Full control".
I have recently purchase and insalled FMS4.I have created several .FLV video files and (.MP4 h264 files for failback for those who would like to view the videos from iOS devices).I have the .FLV files working great on the streaming player (Longtail) using RTMP.My player allows for a failback to .MP4 version of the video for 'Progressive Download' and 'Download'.I understand that HTML5 will not work with RTMP.Is there a way to house these .MP4 files on the FMS and serve them using HTTP from the FMS?Is there an area within FMS that allows HTTP serving?I read something awhile back about setting up Apache Server HTTP to serve the videos.Is this feasble or I'm I better off just putting the files on my web server and linking to them there?Can someone give me some advice on best practices when using failback for HTML5 videos in cases where flash in not available?
View 1 Repliesi've done an as3 application that record a video stream (webcam) with fms4. The problem is that the files generated have a weight of only 1kb.[code]
View 2 Repliesi have a iis need 80 port so how to change default port 80 in fms4.5
View 1 RepliesParden me if this question was asked earlier. While installing FMS i have entered the port numbers 1935,100 instead of normal 1935,80 as i already have wamp in my default port 80, but when i try to call the localhost url, both the port [URL]..
View 2 RepliesI just set up a new copy of the official Adobe Amazon Machine Image for FMS4.One show stopper: it seems to require a license key in fms.ini, just like any other FMS4 install.The master log file has "invalid license key" in it. We tried giving it the "Activation key" no dice.There's a license directory in /opt/adobe/fms with 3 .bin files.We tried entering the path to that directory for the license no dice.The docs don't say anything about it.I've spent over 3 hours being transferred around Adobe and listening to elevator music(code).........
We can't login to the Admin Console. After we enter credentials and click login. Error message comes up. "A script in this movie is causing Adobe Flash Player 10 to run slowly. If it continues to run, your computer may become unresponsive. Do you want to abort the script? "if we say no, it comes back. If we say yes it aborts script but we never login to admin console.
FMS is running fine, it just seems to be the flash movie that can't open. We have set it up to allow each website we are running to have its own application. since we have 1500+ applications running, we think this might be the issue. Can someone let us know if there is a application limit per server running FMS and/or should we take the 1500 websites and have them all share the same application?
is it possible to use Video Phone (Cirrus Sample Application) with FMS4?It seems to be possible because in Video Phone source can be found these text: rtmfp server address (Adobe Cirrus or FMS)[Bindable] private var connectUrl:String [code]
View 6 RepliesI have created an swf where I can record the webcam picture as H264 video to a FMS 4.5 (I am using the developer version).My code is looking like this:
var h264Settings = new H264VideoStreamSettings();
h264Settings.setProfileLevel("baseline", "1.2");[code]....
I can then replay the video from FMS just fine, but if I try to copy the video from the FMS application directory into a local project and try to play the video with the FLVPlayback component, or with the Adobe Media Player, it is not playing at all.Is this to be expected? Can't I record a webcam video with FMS in H264 and use that video later without FMS?
I am using Flash Media server 4.5 and i read the tutorial if i want to stream the live feed, i may need to use the media live encoder.
but what i found in media encoder is i have to manually setup everything and it only support camera devices. But in my case i have multiple video files keep received from another program and place it on file system (server),my goal is use the Flash Media server to perform a live boardcasting with these video file one by one. That means when client watching a live streaming, they will not notice the server is playing mov1, then mov2, then mov3, then mov4... and so on.
You can imagine i am trying to boardcast a live footage say for 60sec, but the video file will not recorded entirely after 60sec, instead for every 10sec i will save a new video file, so that when client watching the live by HLS [URL]when the time reach to 10sec, a mov1 video file available and FMS should boardcast this video on live123.when the time reach to 20sec, a mov2 video file available and FMS should Immediately follow the mov1 boardcast on live123.and so on...Also can FMS dynamically create a new streaming session (invoke by code), so that when client A uploading some video files to the server, the FMS open a new streaming session only stream cilent A video files?the configuration to boardcasting like screen size, bit rate, etc should be pre-defined on the server. [URL]
I am developing peer to peer video conference application with FMS4 but there is some latency problem.
View 1 RepliesWe had FMS2 installed before and the paths to all our videos are like rtmp://ServerName/sites/.... (the default path on FMS2) Now we upgrade to FMS4 and we would like to keep these paths the same because we have many HTMLs that reference these videos. However, the default path on FMS4 is rtmp://ServerName/vod/... Is there a way to change "vod" to "sites"?
I tried to change VOD_COMMON_DIR in fms.ini from /install_dir/webroot/vod to /install_dir/webroot/sites, and also changed the document root in httpd.conf, but rtmp://ServerName/sites/ is still not working.
We produce podcasts from Camtasia Relay. It can output the following to a file system (url/file path combination):
1) html/swf/mp4 and
2) mp3
The Camtasia Relay produces a link to the html file, which contains the swf which links to the mp4.
How can we natively stream these in our fms 3.5 server?
For example: In Internet explorer, would the link be rtmp://server/pathtofile.html -- which has the swf pointing to the mp4? and same fo the mp3: rtmp://server/filename.mp3 If the Camtasia Relay product creates the URL as http:// -- Does this automatically imply a progressive download by the http protocol? And by association, the url needs to be re-written to stream it, versus progressive download?
I am working in flash chat in that I need font type,size and color for typed text. how to send the html data from client to server and get back for client.
View 1 RepliesIn our company we upgraded to fms 4 and installed the apache that comes bundle up with the installation. We had it configure and now we can play videos in html 5 by using the http protocol. The question I have is, can we use https protocol instead of rtmps? I've been doing a lot of research and I found documentation that says to put a minus sign in front of port 443 (-443) in the fms.ini file in the ADAPTOR.HOSTPORT line but it also says that with this configuration port 443 will only receive rtmps connections. My next step is to put the minus sign in front of the port number and restart the server and just try to establish connection using https to see if i works.
View 1 RepliesWe've set up a recording service that constantly populates an FMS application with new .mp4 files. How can we automate the creation of html files on the webserver to point to and stream these new videos? We use the webserver included in the FMS installation.
View 1 RepliesI have 3 seperate .swf on a single html page which are all communicating with FMS on separate connections. Do you think there will be any stability issues? or connection issues. All the .swf use the same main.asc. There are no apparant problems so far just need an expert opnion.....a side note is I've also noticed an error in the error logs that says its detected a backwards time stamp when recodring. Whats that all about? The application seems fine. Using FMS 3.0
View 2 RepliesI want to use fmscheck to monitor my server. When i try the command ( on the FMS server itself, running linux debian)
[Code]...
i opened the html file and it said connection timed out?
View 2 RepliesWe have some HTML pages that embed a swf file to stream flv videos. The video doesn't play and I firstly thought it was the video player's version problem. But it seems more to be related to the path now.
[Code]...
Can Adobe Flash Media Streaming Server 3.5 run on AMD Athlon Dual Sock Quad Core?I just requested a Dell server to be added to our farm to run as a Media Server and to my surprise, while reading the requirements for FMS it states the following: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended)
View 2 RepliesI'm trying to troubleshoot a Flash Media Server working with a little video playback application I wrote a few years ago that has suddenly stopped working.I'm using CS3/Actionscript 3.My app uses the FLVPlayback Component, and was working well last time I checked. I recevied a report that the videos stopped working, and have been looking into it.I figured I'd add a bunch of event listeners to the FLVPlayback's ncMgr.netConnection so I could get debug info on things like io errors, net status, etc.The problem I'm running into is that the netConnection is null when I set it to anything on my Flash Media Server, and adding any event listeners to this netConnection throws errors.Here's what I've tried so far:
Playback of a local FLV file works fine.In the FLVPlayback documentation, I found an example and stole the URL of the stream they were using in the example, and that works fine, although it is an HTTP protocol stream rather than RTMP.Any attempt to access FLV files on my Media Server, which has worked fine in the past, basically cause the FLVPlayback object to sit and hang in "buffering" mode and never progresses beyond this point.The netConnection object in this case is null.Here's my code:[code]........
Again the purpose of this is to troubleshoot the video streaming from the Flash Media Server, and it seems like there is no netconnection to the server being created.Does this mean that the server is not working, or is there a problem with the way I'm trying to access the content on the server?This was all working fine before, and I have set up the server-side application .ASC files and such to allow things to work fine on the server end.
How can we automatically configure edge from the admin console of flash media interactive server?
View 1 RepliesI would like to know the number of connection allowed in the free developer ediiton of Flash Media Server.
View 4 RepliesI'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.