Media Server :: FLVPlayback Component's NcMgr.netConnection Is Null When Connecting To My Flash Media Server?
Jan 13, 2010
I'm trying to troubleshoot a Flash Media Server working with a little video playback application I wrote a few years ago that has suddenly stopped working.I'm using CS3/Actionscript 3.My app uses the FLVPlayback Component, and was working well last time I checked. I recevied a report that the videos stopped working, and have been looking into it.I figured I'd add a bunch of event listeners to the FLVPlayback's ncMgr.netConnection so I could get debug info on things like io errors, net status, etc.The problem I'm running into is that the netConnection is null when I set it to anything on my Flash Media Server, and adding any event listeners to this netConnection throws errors.Here's what I've tried so far:
Playback of a local FLV file works fine.In the FLVPlayback documentation, I found an example and stole the URL of the stream they were using in the example, and that works fine, although it is an HTTP protocol stream rather than RTMP.Any attempt to access FLV files on my Media Server, which has worked fine in the past, basically cause the FLVPlayback object to sit and hang in "buffering" mode and never progresses beyond this point.The netConnection object in this case is null.Here's my code:[code]........
Again the purpose of this is to troubleshoot the video streaming from the Flash Media Server, and it seems like there is no netconnection to the server being created.Does this mean that the server is not working, or is there a problem with the way I'm trying to access the content on the server?This was all working fine before, and I have set up the server-side application .ASC files and such to allow things to work fine on the server end.
View 6 Replies
Similar Posts:
Nov 30, 2010
[URL]
I followed the above example in AS2,but only get the error:
Call to a possibly undefined method getNetConnection through a reference with static type fl.video:INCManager.Here's my code: this.addEventListener(Event.ENTER_FRAME,
[Code].....
View 5 Replies
Aug 31, 2010
I am working on streaming programs through "Adobe flash Media Live encoder" in my website.The steps that i done for streaming is
* Installed Adobe flash media live encoder
* In the FMS URL entered as " rtmp://myserver ip/live "
* In stream given as "livestream"
* when i click connect the follwing error is displaying " Invalid primary FMSURL "
The website i am going to implement is [url]... which is done using PHP. Is there anything i have to do in coding to connect the media server.
View 1 Replies
Jun 24, 2009
I have inherited a custom application on Flash Media Interactive Server 3.0 that broadcasts audio in real time. The custom app is written using Adobe Flash Professional 8 and actionscript 2.0.
A little background of how the custom app works When a user connects to the media server to join a stream, our custom application calls out to a seperate application server (that is not Flash) to determine if the user is allowed to connect to a broadcast stream and which stream they should join. We use Xml.sendAndLoad() to do this. The application server we call sends back Xml to the custom App on the Flash Media Server.
[Code]...
View 1 Replies
May 27, 2009
I have a couple of lessons that I have created in Flash CS3 for Flash Player 9 with AS3.In the main timeline of the lessons I have an flvplayback component setup to connect to our instance of Akamai's flash ondemand application to stream down several videos.
I have a customer who is behind a client side proxy server that is having an issue where the first 10-15 seconds of the any video plays then the video drops out and it appears that the flash player attempts to make a connection on another port which causes multiple audio streams to play but the video never comes back.From the network sniffer read out that their IT send me it appears that the flash player initially attempts to get out on port 80 then attempts port 1935 then attempts 443. if there is anyway to stop the flvplayback component from attempting multiple connections?
I created a stripped out application that just has a flvplayback component in it and when the end user opens that one it streams the video fine. I can only assume that my lessons which are using scorm and webservices to make database updates are reaching some bandwidth limit that the end users proxy doesn't like.
View 1 Replies
Jan 17, 2011
I recorded videos using fms and i want to play them using FLVPlayback component. I've done some research but i cant find somethinguseful, I tried this code :
flvplayback.source = "rtmp://localhost/appname/instancename/video";
View 5 Replies
Sep 27, 2010
I'm using the RTMFP protocol to publish and play video and audio, but i'm with a little problem. I installed the FMS 4 Development Server in a Windows Server machine located in our local network and it works perfectly. In order to deploy our application, we have a remote server with a fresh install of the Ubuntu 10.04 Server, and the FMS 4 installed in this server. In other server we have the Java and Flex application, which will be used in the client browser.
The problem is that when trying to change the NetConnection url to the remote FMS server, which is the Ubuntu server, the netconnection can't connect to it. When changing to the RTMP protocol it connects, but with the RTMFP don't. I can't find any information in the log files or anything else.
View 9 Replies
Jun 22, 2011
I am trying to set up DVR streaming using FLME. I'm following this tutorial: http:[url]........I'm up to Step 2,
I put in the following information into the FLME:
FMS URL: rtmp://222.222.222.222/dvrcast_origin
Stream: mp4:sample.f4v
Then click 'Connect' , but I get an error "Failure to connect to primary server verify that your server URL and application name are valid and that your internet connection is working and retry". My server is a 32-bit windows 2007 VPS , with FMS running.I don't know if I set up the DVR Cast application correct. All I did was copy the dvrcast_origin into the installationdirectory/applications, then I started a new instance of dvrcast_origin with _definst_...Also, I am running the trial version of FMS, and DVR needs FMIS. Is there a way I can just run FMIS?
View 16 Replies
Jun 20, 2009
I try to establich the connection with asc file from applications/videochat $connection_string="rtmp://videochat/"; And I'm getting the result from media server
Connecting to the video server...>>The client does not have permission to connect to the application, or the application expected different parameters from those that were passed.>>The connection was closed successfully
View 9 Replies
Dec 1, 2010
I have access to a flash media server on a CDN.I want to allow people to easily connect to this server. Currenty, they need to an additional software to connect to the FMS.It would be nicer if they could just connect to the server with their browser.So I assume I need to create a SWF file and connect from this file to the FMS (with Actionscript).The end result would look like the demo of the jquery webcam plugin, only that the SWF file would establish a connection to the FMS and stream the video to the FMS
View 1 Replies
May 26, 2010
I am trying to connect to an FMS application without flash (no SWF). To the best of my knowledge,the only way to accomplish this is thru the admin APIs, is that correct? If so, how do I return meaningful values from the admin API? I can call functions and stuff using the broadcastMsg API call but I can't seem to get back any values. All that is returned is a useless "Success" type message. I have tried using shared objects and the getSharedObjects API call, but the call doesn't return any info on the contents of the shared objects, just their names and some info on their persistance.
Is there another way of accomplishing my goal outside of the Admin API? If not how do I return meaningful variables from the Admin API? Is there a way to hack or extend the admin API?
View 2 Replies
Jun 7, 2011
function Function() {}Error #2044: Unhandled AsyncErrorEvent:. text=Error #2095: flash.net.NetConnection was unable to invoke callback onBWDone. error=ReferenceError: Error #1069: Property onBWDone not found on flash.net.NetConnection and there is no default value. at MinCam()
[Code]...
View 17 Replies
Nov 17, 2010
The ActionScript 3.0 Reference says the following about flash.net.NetConnection:
The NetConnection class creates a two-way connection between a client and a server. The client can be a Flash Player or AIR application. The server can be a web server, Flash Media Server, an application server running Flash Remoting, or the Adobe Stratus service. Call NetConnection.connect() to establish the connection.
Does this mean I make a regular HTTP connection to any web server using an NetConnection object? I am a little confused about this as further down the section on the connect() method says connect(): Creates a two-way connection to an application on Flash Media Server or to Flash Remoting, or creates a two-way network endpoint for RTMFP peer-to-peer group communication....Pass an "http" URL to connect to an application server running Flash Remoting.. So, the application server has to have Flash Remoting?
View 1 Replies
Nov 10, 2009
Can Adobe Flash Media Streaming Server 3.5 run on AMD Athlon Dual Sock Quad Core?I just requested a Dell server to be added to our farm to run as a Media Server and to my surprise, while reading the requirements for FMS it states the following: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended)
View 2 Replies
Jan 17, 2010
How can we automatically configure edge from the admin console of flash media interactive server?
View 1 Replies
Mar 27, 2010
I would like to know the number of connection allowed in the free developer ediiton of Flash Media Server.
View 4 Replies
Jul 22, 2010
I'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
View 12 Replies
Jul 1, 2010
I have to a problem using the Flash Media Interactive Server Feature Explorer. I want use the sample: RecordStream. I can see the instance "RecordStream" in console FMS 3.5. and show me the video in app AIR, but does not save the .FLV in my server.
View 6 Replies
Jul 6, 2010
Apply the security patch found here:http:[url]............For more information see the followingresource:CVE: 2009-1365
View 1 Replies
Aug 23, 2010
I have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 Replies
Oct 13, 2010
Our flash media server stops taking connection sometime. Any one have any idea about sophos antivirus?
View 8 Replies
Jan 12, 2011
We purchased FMIS and we are encoding large 15+ hour MP4 recordings using flash media encoder. When opening these large files for playback, which have not been opened recently the player displays the loading indicator for up to 4 minutes! Once it has apparently been cached on the server it opens immediately from any browser even after clearing local browser cache. So a few questions for the experts
1. Why is it taking so long to load the file. Is it because the MP4 metadata is in the wrong format and the file is so huge? I read somewhere that Media Encoder records with incorrect MP4 metadata is that still the case?
2. Once its cached on the server, exactly how much of it is cached. Some of these files are larger than 500mb.
3. What fms settings do you suggest I change. FMIS is running on windows server R2 64 bit, but FMIS itself is 32 bit. We have not upgraded to the 64 bit version. We have 8GB of ram. Is it OK to set FMS cache to 3GB. And would that only have enough room for 3-4 large files, because we have hundreds of them.
View 1 Replies
Sep 23, 2011
is it possible fast forward, rewind video in flash media server through flash action script ?
View 5 Replies
Mar 23, 2012
I am using flash media server 4.5 for video streaming and genrate log files. In log file i have found the user publish point name in "x-sname" filed but this filed contains blank values in many events.This fileds contains value only in "PUBLISH,UN_PUBLISH,RECORD and PUBLISH_CONTONUE" event and other then these 4 events all events are not user related event.?I like to fetch the user bandwidth detials using these log files which user used how many bandwidth.I also like to know I can see serval files on flash log folder name "access.00.log,access001.log and admin.00.log,admin.001.log" Any one please explain what is the name convation for this filed how can i identifiy which files contains information for which date.?
View 1 Replies
Dec 13, 2010
I need a solution for this: when the port 1935 is closed, the NetConnection switch rtmpt (port 80). The NetConnection class built in function: proxyType="HTTP" not works or I use not rightly.In the FLVPlayback class works this function, but I don't know how..
View 7 Replies
Jun 30, 2011
i m new for FMS I just wanna make a connection, I put swf file in FMS folder and here my codepackage{ import flash.net.NetConnection; import flash.display.Sprite; importflash.text.TextField; import flash.events.NetStatusEvent;public class main extends Sprite private var
View 3 Replies
Aug 22, 2011
Can anyone tell me why I would not be getting Netconnection.NetworkChange and Netconnection.Closed events would not be getting fired when I am working on Flash CS5?
I get the Success event, but when I am attempting to test my reconnection code I pull out my network cabled and I never get the closed event.
Interestingly, I do get the Closed and NetworkChange events when I am debugging, but not when I just run the movie.
View 7 Replies
Jul 14, 2010
I'm trying to connect to an FMS server with a Flex application. I can throw the rtmp URL straight in as the source for a VideoPlayer and it will work, but can't figure out how to get it to work with a NetStream. The pure Flash Video element works as in the FMS Flash demos, but is extremely laggy and lacks all the nice functionality of the built VideoPlayer. Is there any documentation on working with FMS with Flex? We're at a point where we need to decide quickly if FMS will do what we need to do or if we should purse other technologies.
View 4 Replies
Jul 29, 2011
I'm trying to stream my webcam to my FMS Server, using AS3, but I get this error message:
[Code]...
View 2 Replies
Feb 3, 2010
I'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
View 30 Replies
