Media Server :: Rtmp Streaming Doesn't Work On Mac OS System
Sep 1, 2011
i try to play video on Mac OS system using the standard embed code:
<object height="409" width="600"><param name="movie" value="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf" /><param name="flashvars" value="src=rtmp%3A%2F%2Fmy-server%2Fvod%2Fflv%3Amy-videoposter=http%3A%2F%2Fosmf.org%2Fimages%2Fposter_cathy_fmp.jpg" /><param
[Code].....
on Safari and Firefox but it doesn't work!
Is it a FSM problem or Flash Player problem?
View 1 Replies
Similar Posts:
Feb 3, 2010
I'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
View 30 Replies
Feb 25, 2012
Currently, we are streaming using RTMP, but I want to switch to HLS to allow iOS devices to stream our video. I do not want to encode two separate streams though because we are operating with limited bandwidth on mobile data cards. If I stream using the livepkgr, the delay to iOS devices is about 12 seconds which is OK. However, on desktop clients, we have live scoring integrated with our video, so we cannot have a delay that long. My question is, if I connect to the same stream in a Flash client for the desktop, will the delay still be that long? Or will it stream in real time to flash clients with the delay only for iOS devices using HLS? Also, am I correct in assuming that I can do this on 1 stream, or do I need to setup a separate stream for RTMP and HLS?
View 1 Replies
Sep 9, 2011
I have some questions regarding 4.5 and deciding which version we must license (FMIS or FMS). Obviously there is a huge price difference and as this is within a local network we don't require encryption or multicast. Here is the scenerio we need to stream live DVR to mac, windows browser AND iPhone/iPad and devices running Android 2.2(Froyo)+. I need someone from Adobe to help us decide.
1. I see DVR is now listed as a feature in Flash media server page. Does that mean its no longer exclusive to Flash Media Interactive server. For both http streaming and RTMP?
2. Previously in order to stream live to Adobe dynamic streaming, Flash media interactive server was required because a live segmenter had to be used. Is this still the case? Or can we just launch adobe live media encoder (FLME) and stream to flash media server.3. Related to #2 can we switch between serving streams via RTMP or dynamic streaming without changing the format of the material on disk?4.I was at a webcast for 4.x and remember being told that the latency for http live dynamic streaming was 20 seconds because of the repackaging that had to take place. Is this still true? What is the latency for iOS playback from ingest to playback?5. For the iOS playback feature do the streams have to be in Adobe dynamic streaming format or can we just stream via FLME RTMP and trust it to do the right thing?6. Does the iOS playback support DVR?7. Does the Android plugin have good support for RTMP live streaming including DVR?
View 8 Replies
Sep 20, 2011
Am developing an application with Flex 4.5 & Flash Media Server. I need a visualization curresponding to the plaing track . It is possible with SoundMixer.computeSpectrum(bytes, true, 0) in case of progressive downloading. But not working with rtmp streaming. And also need audio wave curresponding to the track which is also working with progressive ownloading usinf Sound object.
View 1 Replies
Apr 30, 2009
I've freshly installed the FSM demo on a redhat linux box, and have everything working. From that start screen running on Local Host, I click the "Play video (HTTP)" and that video of a train shows up. Cool. But when I click the link above it ("Play Video (RTMP)") I get an error message: "Connection Error. press Play to try again." and no matter how many times I hit play, I get that same message. The Dynamic stream doesn't work either, and the Interactive sucessfully displays webcam feeds, but doesn't show the "Play Live Stream" button thing. Is there anything special you have to do to get the RTMP stuff working? Some special command or server you have to run?
Would firewalls intefere with things (I'm pretty sure there isn't one on the machine, but I'm flailing wildly here) or would permissions mess things up? I'm completely lost ^_^;; I guess I should also add that there doesn't seem to be any log files. I'm looking under the server install directory, and there isn't even a "log" folder. There isn't one under Apache, either. It confuses me. So far all I can find on the internet is instructions to look at the log files...but if they aren't there... Am I just looking in the wrong places, or are they just not being generated yet? I did a tcpdump with wireshark, and the web app IS pinging port 1935 (for RTMP), but the packets are failling the checksum and are refusing to be reassembled because of that. Is this making sense to ANYBODY?
View 18 Replies
Nov 22, 2010
I am developing an application in Flash that runs locally and it uses FMS 4.01, locally. I have been using adobe FMS 4.01 for months with no problem. Today I cannot connect to my server and I cannot even play the sample video on the Flash Media Server Start Screen. The sample video for the http plays after I changed the permissions for flash, but rtmp does not play. I have reinstalled the server; 3.5, 4.0 and 4.01, none of them will connect to rtmp. I receive this error on the flash media server start screen that says "the connection timed out".
View 1 Replies
Feb 19, 2012
I have some .mov files want to stream to Flash media server by ffmpeg. i have already tried to stream a single .mov by FFMPEG command in terminal and it works, the FMS can display the thing i streaming in live.Now i want to stream multiple files as one source, i tried to use above command one by one, but it seems Flash media server stop the streaming when file1 is finished, then start the stream with file2.It makes the stream player stopped when file1 is finish, and i have to refresh the web page in order to continue on file2.i am calling the FFMPEG command by a C program in linux, i wonder is there any method that i can prevent the FMS stopped when i switch the file source in FFMPEG? or is that possible to let FFMPEG constantly deliver the stream by multiple files source without stopped when a file finish
View 2 Replies
Jan 6, 2012
When using Adobe Flash Media Live Encoder, it doesn't seem to recognize my system speakers, so I can't record system audio.
View 1 Replies
Oct 2, 2011
We are working with FMS 4 server for a while for a 2 directions video application, and it works great with rtmp. We now want to use its rtmfp abilities after we used Cirrus for testing in the last few days and it also worked well. Locally - everything is working fine, but when we try the application on the remote server - we have some problems.
[Code]....
Again, it is working beautifully both locally and with Cirrus. RTMP also works well with the remote server.
View 3 Replies
Sep 12, 2010
I had FMS 3.5 developer package installed on my server installed about a month ago. I used to be able to go to the /webroot/ page to see the sample RTMP video play and it worked great. Today, I go to view that page and find that it no longer plays. I get "Connection Error. Please preee Play to try again."
Pressing the play button does nothing, so I click the RTMP thumbnail and it reloads ony to give me that same error again. I can click the HTTP thumbnail and see the video play just fine. But, I want RTMP and after over an hour on the phone with my managed hosting tech, we can't find anything wrong.
Here's the thing: I haven't done anything, I have not changed anything, I have not manipulated the server software whatsoever. It just stopped working and gives me "Connection Error."
[Code]...
View 6 Replies
Jan 17, 2010
For the past while, my developer has been working with me on a small project to put together a live interactive whiteboard app, powered by Flash Media Interactive Server. Well, everything is finished & ready to go, but there seems to be a big problem:
The app was developed & tested on a windows machine, while my server and all my website files (to integrate with) is on a Linux system.
It's been a month since this problem arrose, and there had not been any further progress with this project for the time. My developer doesn't seem to know much about how the 'conversion process' works, if there is one.
Do you know if this is possible (to convert a windows-programmed app to work on a linux system)? If so, do you know roughly how it should be handled?
View 2 Replies
Dec 1, 2011
I'm struggling to get things going on the HTTP live streaming side.
I'm using FMLE 3.2 w/ Flash Media Server 4.5.
Format: H.264
Frame Rate: 29.97
Bit Rate: 800Kpbs
[Code].....
So...it seems like no stream is being created in the livepkgr. What can I do to troubleshoot?
View 9 Replies
Aug 30, 2010
What if I access video delivered through media streaming server on IPAD client. Does it supports?
View 5 Replies
Nov 4, 2010
I install the latest version of apache before the FMS4. After the installation completed, I copied webroot, applications and other files to the web sites home directory. I also updated the FMS.ini file in the config folder. Because I am not familiar with FMS, I don't know whether the change is correct or not.
View 1 Replies
Mar 29, 2011
application.onPublish = function (client, p_stream){ var myInfo = SharedObject.get(p_stream.name); myInfo.setProperty("live", true);
I set the sharedobject using code above,now I can publish video,but so is not set(from admin console, "shared object" tab).
View 3 Replies
Jul 22, 2010
I'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
View 12 Replies
Feb 3, 2010
I installed FMS 3.5.1 dev version. To add protection on the video content, I followed the topic at [uRL]..
Is there additional setting I have to make? Is DisallowedProtocols only working at commercial version?
View 3 Replies
Feb 28, 2012
I try to do live stream by FMS 4.5.1 and FMLE 3.2 (H.264&MP3 encoding) It's all good no matter video or audio. But after about 30 mins, stream freeze. Refresh doesn't help, only get a black screen without any error message.
restart service or reboot my PC still the same. The only way to fix it is uninstall FMS and Install it again. HDS works again....but same problem happens after 30 mins or a couple of hours.
tried on 2 PC (Win7 x64 & x32) still the same.
View 2 Replies
Jan 14, 2011
We had FMS2 installed before and the paths to all our videos are like rtmp://ServerName/sites/.... (the default path on FMS2) Now we upgrade to FMS4 and we would like to keep these paths the same because we have many HTMLs that reference these videos. However, the default path on FMS4 is rtmp://ServerName/vod/... Is there a way to change "vod" to "sites"?
I tried to change VOD_COMMON_DIR in fms.ini from /install_dir/webroot/vod to /install_dir/webroot/sites, and also changed the document root in httpd.conf, but rtmp://ServerName/sites/ is still not working.
View 5 Replies
Feb 24, 2010
I have a virtual directory (Storage Area Network) in 'C' drive as well as in "webroot" folder in Flash Streaming Server. What do I need to do to make RTMP videos work from SAN directory on Flash Streaming Server. It works fine for http. RTMP from vod -> application folder works fine. I have done a lot of research and found out that we can use virtual directories for streaming videos. I am unable to find steps on how to use it..
View 4 Replies
Oct 7, 2010
I am trying to publish a video to an RTMP Server but it doesn't publish. It might be a pre-release bug. I am able to play a NetStream but not able to publish one. Is there a sandbox issue? I'm not sure. Because, the FMS RTMP Server will not let a client connect unless it has been downloaded from the same host as the server (something like a sandbox condition)
View 2 Replies
Oct 8, 2010
We are attempting to transcode some video to a format suitable for our Flash Streaming Server. In the past we have used Adobe Media Encoder (AME) CS4, but we are working with *.VOB files this time, and AME CS4 does not support them. We are attempting to use Handbrake now, as it has great support for h.264 and MP4 files. Unfortunately while the files play wonderfully on our local machines, they do not stream from the Flash streaming server over RTMP. The files come out of Handbrake with a *.m4v extension. Our old files out of AME CS4 are *.MP4's with h.264 and AAC audio. I can see no differences in video or audio codecs which leads me to believe it may be a container format problem. We are attempting to use Handbrake because it does an excellent job of batch encoding files and produces good quality files.
View 1 Replies
Oct 11, 2010
Quick question - I have the following setup:
(1) An ec2 instance with an SWF on it - this SWF plays streaming video - i.e. is a video player like JWPlayer
(2) A streaming video distribution set up via Cloudfront
If I stream the the video via RTMP from Cloudfront to the SWF (which is on ec2) - would I incur charges for data transfer into the server (i.e. for data being read by the SWF) and out of the server (i.e. for data being displayed by the SWF to the user) on account of streaming the video to users (assuming that data transfer into and out for the server is being charged for)?
View 1 Replies
Nov 10, 2009
Can Adobe Flash Media Streaming Server 3.5 run on AMD Athlon Dual Sock Quad Core?I just requested a Dell server to be added to our farm to run as a Media Server and to my surprise, while reading the requirements for FMS it states the following: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended)
View 2 Replies
Aug 23, 2010
I have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 Replies
Jun 29, 2010
i have a small LAN of about 8 computers all of which are running windows 7. I have installed FMS and XAMPP webserver on one of the machines. I want to stream live from one PC to all the other PCs on the LAN. I have a webpage with jwplayer embedded in it on my XAMPP webserver that is able to see the live stream when i start it locally. I mean the live stream works fine on the machine with the servers on it. But when i want to view the live stream from another machine in the LAN by accessing the webpage that has the jwpalyer from another machine, The jwplayer returns "server not found:rtmp://192.168.10.1/live" error. I was thinking that maybe a firewall is blocking the 1935 port but i have turned off the firewall of every PC on the LAN. I have unistalled any antivirus program on all the PCs. But i still get the same error when i try to access the live stream from another PC on the LAN.When i run netstat -a -n|find ":1935" i get 192.168.10.2:49184 192.168.10.1:1935 SYN_SENT and i think the request for the stream is sent but the conection is rejected.
This is the code for the webpage with jwplayer embedded in it. maybe it:
<html>head> <title>JW FLV Media Player</title> <script type="text/JavaScript" src="swfobject.js"></script>
[code].....
View 3 Replies
Mar 4, 2011
Somebody I know can't watch because they have a proxy server.The nc.connect() call to get the live stream fails because it goes direct from AS3 to FMS and doesn't go through the proxy server.
View 1 Replies
Jan 8, 2010
i am new on steaming & flash server; when we try to use RTMP over HTTP the outside client gets the internal IP address of the FMS server instead of the NAT one or public IP address, how can we solve this.
View 1 Replies
Sep 29, 2009
We (the university I work for) want to add an IP camera to the top of a building (so it has to be IP, we can't put a machine up there, so USB is out of the question) to stream a live view of the quad. The problem is, I can't find a way to stream any IP Cameras through the flash live encoder. I tried a camera by Axis, but their capture driver only supported MJPEG which the live encoder does not.
View 3 Replies