Flash :: RTMP Streaming Server Implementation: Connect/createStream/play Message Sequence Passed, But No Video/audio In Flashplayer
Oct 8, 2010
Writing RTMP Streaming Server for streaming AVC+AAC video. And it works fine with rtmpdump. But I can't force it to work in flowplayer and other flash video players.The message sequence after handshake is similar to FMS / RED5 / erlyvideo / haxevideo servers: I've tried a lot of variations.
From Chrome debug console I can see, what all negotiating messages passed to the flowplayer. The last one is onMetaData. And after this the working sample (rtmp://flash.tvwmedia.net/LiveVideo//Live300) gets NetStream.Buffer.Full. And streaming from my server don't get it.
I'm starting with AVC Header message, containing sps/pps. After it first AVC picture passed. After - AAC header and AAC sample. And then AVC/AAC samples. This dumped OK by rtmpdump - I have working flv on exit. But flowplayer and others does not work.
[Code]...
View 2 Replies
Similar Posts:
Sep 20, 2011
Am developing an application with Flex 4.5 & Flash Media Server. I need a visualization curresponding to the plaing track . It is possible with SoundMixer.computeSpectrum(bytes, true, 0) in case of progressive downloading. But not working with rtmp streaming. And also need audio wave curresponding to the track which is also working with progressive ownloading usinf Sound object.
View 1 Replies
Oct 11, 2010
Quick question - I have the following setup:
(1) An ec2 instance with an SWF on it - this SWF plays streaming video - i.e. is a video player like JWPlayer
(2) A streaming video distribution set up via Cloudfront
If I stream the the video via RTMP from Cloudfront to the SWF (which is on ec2) - would I incur charges for data transfer into the server (i.e. for data being read by the SWF) and out of the server (i.e. for data being displayed by the SWF to the user) on account of streaming the video to users (assuming that data transfer into and out for the server is being charged for)?
View 1 Replies
May 19, 2010
How can i connect to my own server to watch my streaming video from another computer?
View 10 Replies
Mar 9, 2010
I am building a flash media player for an live audio stream. The server is set up to stream from a url that looks like so: [URL]. The instructions I have found say to first set the directory:
nc.connect("rtmp://ourwowzaserver.net:80/ourfiledirectory");
And then later play it:
nc.play(mp3:thefilename)
This works when we have discrete filenames on the server (thefilename), but the live stream is not a file - rtmp://ourwowzaserver.net:80/shoutcast. How in the heck do I get .play to play it?
View 2 Replies
Jun 9, 2010
today I install fms3.5 on my pc.
1)I can use rtmp://localhost/vod/mp4:sample2_1000kbps.f4v , it works ok. But when I use rtmp://192.168.8.3/vod/mp4:sample2_1000kbps.f4v, I got Netconnect.connection.rejected. 192.168.8.3 is my fms server IP.
2)When I set fms use port 1935 and 80, rtmp://192.168.8.3/vod/mp4:sample2_1000kbps.f4v works ok on other pc. But using wireshark(Wireshark is a network protocol analyzer for Unix and Windows.) I found , the flash player connect 1935 port at first, it send "connect",the server replay "connection.rejected" and "no scope "vod" on this server". Than it connect to 80 port, so I see the video is not send throw 1935 port with rtmp, but throw 80 port with rtmpt. Why? How can I see video throw rtmp?
View 9 Replies
Oct 7, 2010
I am trying to publish a video to an RTMP Server but it doesn't publish. It might be a pre-release bug. I am able to play a NetStream but not able to publish one. Is there a sandbox issue? I'm not sure. Because, the FMS RTMP Server will not let a client connect unless it has been downloaded from the same host as the server (something like a sandbox condition)
View 2 Replies
Jul 22, 2010
I'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
View 12 Replies
Nov 22, 2010
I am developing an application in Flash that runs locally and it uses FMS 4.01, locally. I have been using adobe FMS 4.01 for months with no problem. Today I cannot connect to my server and I cannot even play the sample video on the Flash Media Server Start Screen. The sample video for the http plays after I changed the permissions for flash, but rtmp does not play. I have reinstalled the server; 3.5, 4.0 and 4.01, none of them will connect to rtmp. I receive this error on the flash media server start screen that says "the connection timed out".
View 1 Replies
Feb 15, 2011
I am developing Video Chat over Ip (including audio and text too). But I am unable to get the proper startup material for my desktop application.
View 2 Replies
Aug 25, 2009
I ran a simple live video streaming application for the first time with actual users and ran into a couple of serious performance issues that had not turned up during testing. In this instance there was one video stream from a live web cam and used FMLE at 150 kbps using VP6 and MP3 @22k. There were 16 clients and everything worked pretty good for about 30 minutes. (although some clients said their audio and video were out of sync by up to 3 seconds)
Then individual clients would have either the video freeze or the video would continue and the audio would stop. These clints had to "disconnect" and then "connect" again to the application. This happened to all of the clients at one time or another for several minutes. I stopped and restarted the FMLE with progessively lower bandwidth settings down to 75 kbps but still clients were having the same issue.
I eventually stopped the FMLE and used the applications built in publisher at 45 kbps and that seemed to eliminate the freeze/dropping issue. But of course the video quality was very poor and some clients still reported that the audio was out of sync with the video. The server hosting the FMS application is a quad processor dell with lots of memory and network connectivity. The Flash Media Admin Console performance graph showed the total Bandwidth as 3 Mbps at maximum.
View 8 Replies
Nov 11, 2009
I am trying to convert our all-flash website to HTML 5.But since so many users still use IE and other browsers that do not support HTML 5 yet,I am looking for some flash media players that can replace <audio> and <video>. My google skill does not yield good results.The flash media player should dispatch events specified at https:[url]..._audio_and_video_in_FireFox (or at least talk to javascript some how for those events).Do you know a flash media player that can easily be embedded inside <audio> or <video> and talks to javascript for events?
View 2 Replies
Sep 7, 2010
is there a way to connect a Video object to a webcam installed on another computer in the Network, without setting up a streaming server?The machines can have fixed IPs and whatever, but I'm limited to LAN/WAN technology. Using AIR is possible.
View 5 Replies
Apr 8, 2011
Same file streamed from FMS4 (same on 3.5) with rtmp protocol has very poor quality compared to real file quality. Is there some low level configuration to do on Flash Server? Is the streaming server making some kind of transcoding before sending the stream? Or it can be Flash Player? Tried unchecking "hardware acceleration" but nothing changes. I am on a local gigabit network, so no network bottlenecks. Video seems very pixelated on the edges (not soft/antialiased). These are the file details:
[CODE]....
View 4 Replies
Sep 12, 2010
I have this sample code from the e-book: "Learning Flash Media Server 3". The purpose of the code is to create a FLV. The code is not running as it should. When I click on the 'record' button, the label is to change to 'recording', that dosen't seem to happen and also when I click on the 'Stop Record' button, I get the following error:
"TypeError: Error #1009: Cannot access a property or method of a null object reference.at MinRecord/stopRecord()"
[Code]....
My deduction is that the 'if' statement in the 'startRecord' function is not resolving to 'true' and hence the label is not changing to 'Recording'. Also I feel that the assingment to the variable 'ns' of type NetStream is not being done and hence in the function 'stopRecord' I get the above mentioned error message when I click on the stop button. How do I rectify these problems?
View 3 Replies
Oct 8, 2010
We are attempting to transcode some video to a format suitable for our Flash Streaming Server. In the past we have used Adobe Media Encoder (AME) CS4, but we are working with *.VOB files this time, and AME CS4 does not support them. We are attempting to use Handbrake now, as it has great support for h.264 and MP4 files. Unfortunately while the files play wonderfully on our local machines, they do not stream from the Flash streaming server over RTMP. The files come out of Handbrake with a *.m4v extension. Our old files out of AME CS4 are *.MP4's with h.264 and AAC audio. I can see no differences in video or audio codecs which leads me to believe it may be a container format problem. We are attempting to use Handbrake because it does an excellent job of batch encoding files and produces good quality files.
View 1 Replies
Jan 4, 2010
Usually, flash streaming is done by capturing webcam video/audio and streaming using NetConnection and other objects to servers like FMS,Red5,Wowza etc.I haven't found any example on how to create your own stream of images and stream as a video to the server.I know it would be possible to convert the image to bytes and send via SharedObjects. Then decode on server and create a video file on the server (e.g. using ffmpeg), but I would rather do it in realtime on the client side if possible.
View 3 Replies
Jan 27, 2010
Our client has encountered a bizarre problem where they hear an audio feedback or some sort of "duality" when playing an F4V file through FMS. When I tested this myself, I did not encounter this issue. I'm wondering if anyone here can provide some insight as to some of the potential causes of this issue and how we can fix it. We are using
1) FLVPlayback 2.5.0.15
2) Application targets the Flash 10.0 runtime
3) We are using a standard FMS 3.5 install, videos located in the vod folder
4) Trying to playback F4V files. The samples provided by FMS also exhibit the same issue.
On another note, I built a bare-bones Flex application (SDK version 3.5.0.12683 and 3.4.0.9271) using the VideoDisplay component and it always has the duality problem. It even gets worse as I refresh the page, the echoing / multiple audio playbacks seem to compound.
View 5 Replies
Sep 30, 2010
i had installed a FMS4 developper in server on my centOs. I can connect to my FMS with client with RTMP, but with RTMFP, FMS don't reply. I looked at FMS log and i saw edge. 00.log:
2010-09-30 13:11:53 4984 (e)2631504 RTMFP could
not start on edge process for _defaultRoot__edge1. Famille d'adresses non support par le protocole -
View 3 Replies
Dec 2, 2011
I cannot connect to an FMS server from a client on a another domain using RTMP
Locally running a flash client that uses nc.connect(rtmp://...) to connect - works.
But when the client is in another domain I get NetConnection.Connect.Failed in the netconnection onstatus.
I've put crossdomain.xml files on my FMS folders that allow access from any domain (*). Also the allowedHTMLdomains.txt and allowedSWFdomains.txt are set to allow any - though it's not just the live application I can't connect to, it's also any other app.
There are no firewalls blocking on the server. Port 1935 is available. FMS is set to listen to 1935. The server is accessible with other protocols (http) - but with RTMP it only connects when I try to connect locally, as mentioned.
What other reasons or settings can cause the connection to FAIL?
The server is FMS 4.5 Developer Edition.
View 1 Replies
Feb 3, 2010
I'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
View 30 Replies
Nov 14, 2010
I'm implementing the RTMP-protocol for my bachelor thesis. I got through the handshake and application connect process and received the play-command from my client which is actually a jw player.But I now stuck with the audio and video-messages. I can't find something about the exactly built-up of these messages neither in the specification nor somewhere else.What should i do with the metadata and header of the flv-file? Can I send the whole tag and audio-/video-data from my file in the RTMP-audio- and video-messages?
View 1 Replies
Feb 25, 2012
Currently, we are streaming using RTMP, but I want to switch to HLS to allow iOS devices to stream our video. I do not want to encode two separate streams though because we are operating with limited bandwidth on mobile data cards. If I stream using the livepkgr, the delay to iOS devices is about 12 seconds which is OK. However, on desktop clients, we have live scoring integrated with our video, so we cannot have a delay that long. My question is, if I connect to the same stream in a Flash client for the desktop, will the delay still be that long? Or will it stream in real time to flash clients with the delay only for iOS devices using HLS? Also, am I correct in assuming that I can do this on 1 stream, or do I need to setup a separate stream for RTMP and HLS?
View 1 Replies
Sep 9, 2011
I have some questions regarding 4.5 and deciding which version we must license (FMIS or FMS). Obviously there is a huge price difference and as this is within a local network we don't require encryption or multicast. Here is the scenerio we need to stream live DVR to mac, windows browser AND iPhone/iPad and devices running Android 2.2(Froyo)+. I need someone from Adobe to help us decide.
1. I see DVR is now listed as a feature in Flash media server page. Does that mean its no longer exclusive to Flash Media Interactive server. For both http streaming and RTMP?
2. Previously in order to stream live to Adobe dynamic streaming, Flash media interactive server was required because a live segmenter had to be used. Is this still the case? Or can we just launch adobe live media encoder (FLME) and stream to flash media server.3. Related to #2 can we switch between serving streams via RTMP or dynamic streaming without changing the format of the material on disk?4.I was at a webcast for 4.x and remember being told that the latency for http live dynamic streaming was 20 seconds because of the repackaging that had to take place. Is this still true? What is the latency for iOS playback from ingest to playback?5. For the iOS playback feature do the streams have to be in Adobe dynamic streaming format or can we just stream via FLME RTMP and trust it to do the right thing?6. Does the iOS playback support DVR?7. Does the Android plugin have good support for RTMP live streaming including DVR?
View 8 Replies
Sep 15, 2011
At a certain point in the app flow, a m4v video is streamed from a remote location via rtmp. This works well, except for two little problems:
1. In very rare cases, the video starts playing, but you see no images and only hear the audio. Seems like this happens more often with Chrome, but that is only a guess.
2. In the first frame or so of the video, you hear a noise in the audio. It really is very short, but still a nuisance. This chirp is not there when viewing the same video with VLC or QuickTime player. It IS there when viewing with the Windows Media Player.
Are there any known problems with codecs and the flash as3 video streaming (via NetStream/NetConnection)? The video is composed by using the ffmpeg library (one mess of a library, I can tell you...) to bring together a live-rendered video (using a 3D Engine) and a pre-created *.wav (which does not have the chirp).
View 3 Replies
Feb 24, 2011
I am new in action script 3.0. i am trying to build an audio player which will stream audio(mp3 etc.) from wowza media server. the player needs to have a play button, stop/pause button, a play progressbar and a volume scroll bar. i am using NetStream object to paly the audio
View 1 Replies
Apr 30, 2009
I've freshly installed the FSM demo on a redhat linux box, and have everything working. From that start screen running on Local Host, I click the "Play video (HTTP)" and that video of a train shows up. Cool. But when I click the link above it ("Play Video (RTMP)") I get an error message: "Connection Error. press Play to try again." and no matter how many times I hit play, I get that same message. The Dynamic stream doesn't work either, and the Interactive sucessfully displays webcam feeds, but doesn't show the "Play Live Stream" button thing. Is there anything special you have to do to get the RTMP stuff working? Some special command or server you have to run?
Would firewalls intefere with things (I'm pretty sure there isn't one on the machine, but I'm flailing wildly here) or would permissions mess things up? I'm completely lost ^_^;; I guess I should also add that there doesn't seem to be any log files. I'm looking under the server install directory, and there isn't even a "log" folder. There isn't one under Apache, either. It confuses me. So far all I can find on the internet is instructions to look at the log files...but if they aren't there... Am I just looking in the wrong places, or are they just not being generated yet? I did a tcpdump with wireshark, and the web app IS pinging port 1935 (for RTMP), but the packets are failling the checksum and are refusing to be reassembled because of that. Is this making sense to ANYBODY?
View 18 Replies
Sep 1, 2011
i try to play video on Mac OS system using the standard embed code:
<object height="409" width="600"><param name="movie" value="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf" /><param name="flashvars" value="src=rtmp%3A%2F%2Fmy-server%2Fvod%2Fflv%3Amy-videoposter=http%3A%2F%2Fosmf.org%2Fimages%2Fposter_cathy_fmp.jpg" /><param
[Code].....
on Safari and Firefox but it doesn't work!
Is it a FSM problem or Flash Player problem?
View 1 Replies
Feb 19, 2012
I have some .mov files want to stream to Flash media server by ffmpeg. i have already tried to stream a single .mov by FFMPEG command in terminal and it works, the FMS can display the thing i streaming in live.Now i want to stream multiple files as one source, i tried to use above command one by one, but it seems Flash media server stop the streaming when file1 is finished, then start the stream with file2.It makes the stream player stopped when file1 is finish, and i have to refresh the web page in order to continue on file2.i am calling the FFMPEG command by a C program in linux, i wonder is there any method that i can prevent the FMS stopped when i switch the file source in FFMPEG? or is that possible to let FFMPEG constantly deliver the stream by multiple files source without stopped when a file finish
View 2 Replies
Mar 2, 2011
When I connect data services using blazeds I get following error message.
[Code]...
Why am not able to connect? But when specify remoteObject in the declaration tags and call the methods it works fine.
View 1 Replies
