Arrays :: All Color Values Turns Into CurrentColor
Feb 20, 2011
I'm trying to make an array with different color values. My problem is that when I do...
teamColor[i] = currentColor...
All color values in my array turn into the currentColor. (I would upload more code, but that would be a massive mess, considering that I have code everywhere with references from movie clips that are as far as 3 layers deep. However, this would be irrelevant anyways (probably), because I tested this with color values on my main timeline, without any references to or from anything deeply nested). I would like to add that I tried adding strings in there and that the strings remained their original, intended, value, while the color exhibited the same phenomenon.
I changed my code by creating separate variables for each color instead of putting the variables into an array (not what I really wanted to do, but it works). My code looks like this:
if (teamColor != 0) {
this["team"+teamColor+"Color"] = new ColorTransform(0,0,0,1,currentColor.redOffset,currentColor.greenOffset,currentColor.blueOffset,)
teamColor = 0
namebox.addboxes()//function in a movieclip
}
TeamColor is now an int that is changed based on which box a user clicks from a movie clip that has a dynamically generated name, based off of what the variable value in a loop was when it was created.
(E.G: 'tempboxname[ttns].name = i;')
teamColor is then equal to that name when the user clicks it. I have another movieclip with colors in it and the above function is called to check if any teamColor change has occurred, and if it has, act accordingly. (The idea of having teamColor equal to 0 is so that if the user clicks twice, nothing changes. I other conditionals for other colors, all within the same function). That is how I fixed me code. It's not what I wanted, because it's not an array (meaning a seemingly infinite number of teamColors, and thus, teams) but it'll do for me.
View 2 Replies
Similar Posts:
Jul 14, 2009
Flash CS4. When I enter a movie clip to edit the timeline the pasteboard turns to the color of the stage. The result: I can't see the edges of my stage. This is only within the MC. And only within one particular MC (I created another one and the pasteboard stayed 4% gray). When I take the content in the bad MC (via copy frames) and move it to the good one, the same thing happens: Pasteboard turns to the color of the stage. I've tried SFT-CTL-ALT double click. No luck. Strangely, this isn't happening in every FLA. I know it must have something to do with the content on that timeline, but what that is I have no idea.
View 3 Replies
Jan 21, 2011
I am running into some trouble adding an array into another array to create a multi-dimensional array.The code appears as below:
var slideDataArray:Array = new Array();
var slideShowDataArray:Array = new Array();
slideDataArray[0] = xmlData.SlideShowParameters.SlideShowImagesDirectory;[code]........
I am looking for a means of placing the slideDataArray into a 'slot' or value of slideShowDataArray so that I can in the end pass the slideShowDataArray as a parameter to another function.As of now, the last slideDataArray appears 11 times (the loop runs 11 times) in slideShowDataArray and the way the code is written the slideDataArray is unique every iteration of the loop.
View 1 Replies
Jan 28, 2010
How to get RGB color values out of the color picker component?
trace (cp.selectedColor);
returns something like:
16750950[code]....
I am looking for RGB, for example, 0.5 0.5 0.5, for a gray color.Is there a chance the RGB parameters are hidden somewhere or is there a conversion function at least?
View 5 Replies
May 17, 2009
In my example I have established root items (item1,item2,item3 and item4) and sub-items underneath them, and I can easily access the values at the sub-level, but I can't figure out how to output the values on the root level, if I use treemenu[0] it doesn't output "item 1" but the values on the sublevel, how can I point to the actual value on the root level? so it would output for example "item 1"?
Code:
var treemenu:Array = new Array(new Array());
treemenu.push("Item 1");
[code]....
View 2 Replies
Nov 5, 2010
I have a little problem and I guess it won't be difficult to solve, but I am still learning to create codes and I get stuck every once in a while (more every than once haha). What I want is to create to different arrays, one for all the buttons I have, and the other for all the instances of the frames that will take me when I hit each button. So for example if I hit mybutton3, it should take me to frame3.
[Code].....
View 5 Replies
Jun 7, 2007
Is there a simple way to ask "Does this array contain this value?" For example I have an array1 [0,2,4,6,8,10] and another array2 [1,3,5,7,9]. I want to say something like:
[Code]...
In this case of course it would find the value "3" in array2 and then do the appropriate action specified there.
View 4 Replies
May 12, 2009
So I'm coding a maze in Flash using ActionScript 2.0. I'm using a 2D array and with that I will give each point a value, either 1 or 2. I then plan to use modulo and an if else statement to pull a brick movie clip from my library. Here's what I've coded so far with the 2D array. This is my first time using this array and I'm unsure wwether I have coded this correctly. how do I use this array now to assign the values of 0 and 1?
[Code]...
View 2 Replies
May 10, 2010
I've got movieclips of dice called "dicePicked1", "dicePicked2", etc all the way to 6. each of these movieclips has a graphics on keyframes with labels "One" to "Six".Now I'm trying to find (in vain) a way to cross check the labels with arrays of numbers so that each time it finds a dicePicked with the appropriate label, it moves onto the next number to find. For example, I need to see if one of each dice has [1,2,3,4,5,6]. Once the program finds a dicePicked with the Label "One", it moves onto the next element which is 2 and so on. If it finds the last element (and thus all the elements), it returns true. If it doesn't find an element (for example none of the dicePicked have a Label "Three") then it returns false. I'm trying to find a system that can accommodate different combinations and some with the same numbers multiple times (for example 3 different dicePicked have the label "three")
View 6 Replies
Sep 16, 2010
How do I change the values of arrays from different classes? i've array in one class called creation all the array are global variable
[Code]...
View 2 Replies
Apr 21, 2011
I am trying to find the sum of one column's timings which is like '00:00:00' format. I am splitting the time string at ':' and storing into an array. Then trying to add array1[1] value to array2[1] value. Here I'm not getting type casting logic. I'm getting an error when I give int(array2[1]) += int(array1[1]) .
View 2 Replies
Dec 13, 2011
I'm struggling with something that shouldn't be too difficult but I can't figure it out I have a number of Arrays with different values and I want to find the common values all of the Arrays have, see example below:
var arrayOne:Array = ["1","2","3"];
var arrayTwo:Array = ["1","2","7"];
var arrayThree:Array = ["1","2","9","12"];
_resultArray = ["1","2"];
View 3 Replies
Feb 2, 2011
Say I had this array[code]...
This adds five new instances of the Thing class through the main timeline. In the Actionscript code for the Thing class I want to be able to reference the index of the given instance for identification purposes.
View 6 Replies
Jul 1, 2011
TL;DR version: how do I add more values to the 0th row of an array?[If that's too vague, read on.]What I'm trying to do currently is make a tilemap engine. I have an multidimensional array that is sifted through when the program begins that determines what type of tile is added to the stage which was then put in its appropriate place. These tiles scroll when the player moves.
Now, the problem is, I expect to make huge maps. Putting a large amount of children (tiles) on the stage makes the program incredibly laggy, so to fix this I created another multidimensional array that held the values of the tiles that are currently in the field of vision of the player.
the values in the new array shifts and moves along with the player, gets the children that will be left behind and deletes them. To keep things short, the player would not notice the addition and removal of the tiles, because the tiles are added at the position where the player is currently moving and the tiles that are removed are removed where the player is moving away from.
The issue I am having lies with moving up and down. The addition and removal of tiles follows a very strict process:
1. shift the array that holds tiles in the player's range of vision so that new tile values can be added.
2. add children (tiles), assign their names, add the name to the appropriate place in the array and move the child (tile) to the appropriate place on the stage.
3. Delete the tiles left behind.
4. Remove the names of the children that were deleted from the array.
To move up, I would have to unshift the array (so that all the rows move down one), add the names of the new children(tiles) that will appear directly above the range of view, then delete the children that are named in the last row of the array and pop the last value in the array (which, since this is a multidimensional array, is not one value, but the entire last row of children names). The problem is, after I unshift the array and add a new row with only a single value in it, I can't add more values into the row!
(the name of the array that holds the names of the children in the player's range of view is containmentUnit.)
I have tried these,
Code:
containmentUnit[0].push("test");
Code:
containmentUnit[0].splice(0, 0, "test");
but it always comes out the same way-- with an error message that reads:
TypeError: Error #1006: value is not a function.
at storage/update()
how I could add some values to that first row?
View 4 Replies
Nov 11, 2009
If I send remote data from Zend_Amf to Flex, if two array properties on the object have the same data values they are deserialized at the remote end with the same memory storage.Example: AS3 object:
Snippet:
[RemoteClass(alias="TestVO")]
public class TestVO
[code].....
View 2 Replies
Jul 12, 2011
I'm having a hard time wrapping my head around this problem. I have 2 unsorted arrays that need to be compared, array2 must contain all elements of array1 and array2 can any number of extra elements without affecting the result. I don't see any benefits from sorting the arrays and comparing the string values as array2 can have extra information causing noise.
[Code]...
View 5 Replies
Jun 12, 2011
I've been making arrays from numbers produced by the Collatz conjecture. But when the number where we start calculating exceeds over 1x10^16 program can't do any more calculations. It loses it's capability to handle odd numbers. Heres a part of my code that makes calculations:
ActionScript Code:
var a:Number;
var result:Array = new Array();
var count:int = 0;
function calculate(e:TimerEvent):void{
[Code] .....
View 6 Replies
Oct 19, 2008
I am currently using this AS to randomize an array:
Code:
function shuffle(wordtestmix,b):Number {
var num : Number = Math.round(Math.random()*2)-1;
return num;
[Code]....
and would still like to randomize the array without splitting the two values up.
What is the best way to declare this type of array and also adjust the randomize code in order to mix it correctly.
View 1 Replies
Mar 23, 2009
I have a array of categories, for e.g.
var categoryArray = new Array('value1', 'value2', 'value3');
I would like to loop and create new arrays from each of the values in the categoryArray I tried...
for(var i=0;i<=categoryArray.length-1;i++){
this[categoryArray[i]] = new Array();
}
value1[0] = "dsfsdf";
trace(value1[0]);
It doesn't seem to work.
View 3 Replies
Aug 13, 2009
I know it's possible (and the answer must be under my nose) but I am at a loss as to how to accomplish this:I have 5 movie clips on the stage, and their instance names are in one array. I then have an array with hexidecimals that I want to assign the colors to the movie clip. So, in essence clipArray[0] would obtain hueArray[0] and so on and so forth. Here is the small code snippet I am working with.
stop();
var clipArray:Array = [one_mc, two_mc, three_mc, four_mc, five_mc];
var hueArray:Array = ["0xd50000","0xff9000","0xfcff00","0x00c91c","0x005 0d5"];
[code].....
View 2 Replies
Mar 9, 2011
I want to compare one value against all values in the other array and extact a match. These are different in length.
Imagine one column of unsorted ID's and one column of ID's and names. I came up with this, but it doesn't work.
private function mergeCollections():void
{
for (var k:int = 0;k <= idArray.length;k++)
{
[Code].....
my arraycollections arrive from database.
The real thing I'm doing here is recieve values from a table full of ids and a table full of those ides, plus the name (they are separate because, normalization dude!) And I want to put them inside a datagrid that will only display the name.
I say possibly unsorted because the second column might reach a point of several deletes and inserts and might end up unsorted. But for this case I have one unsorted column against one sorted column.
My current output is just one name printed, and the rest dismissed completely.
NOTE: Also take in account that the nameArray has always MORE or EQUAL values to the ID table. and the Id table will always have values that match the names table.
View 1 Replies
Dec 18, 2007
I'm trying to use associative arrays to store my variables but am looking for a solution to change the value of array1[i] to array2[i]. Since it's an associative array, the only way I know how to loop through these kinds of arrays is by the following:
Code:
for(var i in array1) {
trace(array1[i];
}
What I would do when using indexed arrays to change the value of array1[i] to array2[i] would be something like this:
Code:
for(i=0; i<array1.length; i++) {
array1[i] = array2[i];
}
However, I can't see any way you can do this with associative arrays because they do not have a numbered index such that in a loop you could
say array1[i] = array2[i] .
So I'm looking for a way to do this with associative arrays.
View 14 Replies
Sep 2, 2010
What i'm trying to do is creating an array of objects, little squares that are positioned in a grid with coordinates and when i click on the coordinates i need to select only the elements which fit with the value. So, what i'm trying to do now is to pass a value to each element of the array but it doesn't work:
[Code]...
View 2 Replies
Mar 17, 2011
I need to output a series of blocks, when the user clicks, a block changes a color. Am I on a right path? anywhere... (I'm uncertain if I need the array in the main.as). Eventually I need to store the color change in a boolean and trace "Correct" when the blocks are changed in the correct color order. Here is the main.as
[Code]...
View 10 Replies
Apr 2, 2009
I have 3 Numbers representing the RGB values of a color that I'd like to convert into a uint. I'm trying this:
var color:uint = r<<16 + g<<8 + b;
but it will always return 0.
View 4 Replies
May 29, 2009
Up until CS4 the Colour effects dialog box was incredibly powerful. These 8 little fields were never the most intuitive, and it took a lot of fiddling before I realised their true power: the first column basically controls the contrast of an asset - and the 2nd column controls the brightness.Using these experimentally, you can acheive inverted colours, high contrast effects and colourising effect far superior to tints(see image).Well, you USED to be able to - when you could put high numbers in those fields.But the CS4 version of these controls caps any entered values to 100% and 255 respectively.It seems that it is only an effect of the interface - as I can cut and paste clips with the old settings from CS3 into CS4 and they display correctly.Is this an oversight on Adobe's part, or is there another explanation for the loss of a great design feature?
View 5 Replies
May 23, 2011
We have an hsb- color wheel (.png) and we have create a circle which is rotating on the color-wheel. It should grab the color on the wheel, but there is the problem --> It doesn't. We try to make it with the getPixel function and flash traces some numbers, but the wrong ones. In addition there is a rectangle which gets the (wrong) values and shows them as a color.
function mouseDownHHandler(e:MouseEvent):void {
sButtonH.startDrag(false, rechteckH);
/ROTATION
stage.addEventListener(Event.ENTER_FRAME,rotate);
function rotate (e:Event){[code]....
View 3 Replies
Feb 15, 2010
I am having a color array with values like 0x2EFE2E, 0xFFFF00, etc. but when i am trying to trace the values in the array, it prints something else like 95455. I think these are some converted values. But i tried using parseInt(val, 16), uint(val). None of these works. Basically, i just want to take values from this array and assign it to particleColor (a uint) and use like this:
[Code]....
View 2 Replies
Feb 4, 2007
I have an MC with the instance name "building". I want to be able to change the RGB color values of this MC with three buttons for example. for example, one button would change the RGB values to 60 89 159 another button would change the RGB values to 50 251 59 another button would change the RGB values to 22 21 59 And, when the button is clicked, the new RGB color value should fade in without the old values fading out.
View 3 Replies
Aug 4, 2009
I'm facing a strange little problem trying to transfer values from an XML file to my main Flahs document class.[code]
View 5 Replies
