Flex :: Component Implementation With Custom CalloutButton
Jan 24, 2012
I've got a custom CalloutButton component in a package called uiComponents. This custom CallOutButton is needed because I need some more properties in it. This CalloutButton gets added to my MXML like usual;
<uiComponents:MyCustomCalloutButton someproperties here >
</uiComponents:My...>
Now, the enclosed s:calloutContent gets a compilation error, the (almost standard) could not resolve... Naturally, the namespace has been imported.
i created project with flexmojos maven archtype..i used flexmojos:flexbuilder and compile/run with FlashBuilder 4 everything is okay but when i try to compile project with flexmojos i got following error: ERROR] Z:....srcmainflexMain.mxml:[6,-1] Could not resolve < fx:Script > to a component implementation.INFO] BUILD FAILURE
my mxml: <?xml version="1.0" encoding="utf-8"?> <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
I am trying to create a menu bar with the following items: File, Database, Navigate, Window. However, I am getting an error which I do not understand: Could not resolve <mx:XMLList> to a component implementation. Can anyone explain the error to me? My code is as follows:
I am having this error when I try to paste in code of a spark component. The component is a DataGrid and it needs to be a spark and not a mx.[code]The Error:Could not resolve <s:DataGrid> to a component implementation.How can I resolve this error. I need to make my DataGrid into a Spark Component.
This is NOT duplicate of my earlier post (its is slightly different)But this is similar issue with similar error but its not the same error The error I am getting now is below while dispatching the custom event from my custom component
TypeError: Error #1034: Type Coercion failed: cannot convert events::MapEvent@a74ab51 to flash.events.MouseEvent. dispatchEvent(new MapEvent(MapEvent.CLICKED_ON_MAP));
Note: The error in my earlier post is giving below error message
Type Coercion failed: cannot convert flash.events::Event@81ecb79 to com.events.ShopEvent
The difference here are two things, the earlier error is while converting flash event to custom event and now this one is while converting custom event to flash event and secondly, I have no clue why it is trying to convert to the mouseevent where I am just dispatching my custom event with proper listeners.
I'm building a top view 2D map, that it's objects are stored on the server.The kind of objects are 10 and might be a photo, label, button, lists, mix of them or labels with tooltips.The component must request the "areas" that are missing on screen.An area is 1000x1000 px and is cached in flex.To move in the map, will be like in google maps (drag-and-drop).I should be able to have another list and move objects from one to another using drag-an-drop on objects. Ex.: I grab an objects from a list and I move it on this map, I release the mouse button and the item is placed there.Now the problem is: I build a custom component for this trying to emulate the item renderer for performance and recyclage, implement drag-and-drop on objects and request the areas that are missing?
or
I extend the List component from spark and I add some features as multiple kind of itemrenderers and use recycle on them. Of course it must be able to request the missing areas on the screen and cache it's data.Maybe create a custom layout is needed too.What I need is something that must be really fluid, so the lighter this component is, the better.
UPDATE: *There will be not any object over another.
*I will not use hitTest on bitmaps because all bitmaps are wrapped in another component,as they,for now are itemrenderers.
Anyway I already begin to do this using a class that extends the SkinnableDataContainer and a custom layout. As the layout is not like a grid, is sparse, random items at diferent points(x, y).How to get the localX and localY, relative to item renderer and not to the Spark List, from a DragEvent in Flex 4?
I have a custom Flex 4.5 component (to be used in a List) -
Game.mxml (represents a clickable playing table in a card game): <?xml version="1.0" encoding="utf-8"?> <s:ItemRenderer [code].......
But I never see the "game clicked: " trace. Does anybody please know why? I'm probably missing something minor, because I can see the "Clicked: 8946" trace.
This is similar to the question asked here. I am dispatching custom event "ShopEvent" but i am getting error "Type Coercion failed: cannot convert flash.events::Event@81ecb79 to com.events.ShopEvent"Note: Error is thrown from the parent custom component (3rd code snippet), I have added more details thereThis is my custom event. See the first constant, I copy pasted the event name in custom components.
The spark panel component for example can be written like this
<Panel title="Skinny"> <child components ... /> <controlBarGroup> <child control bar components ... /> </controlBarGroup>
[Code]...
The motivation here is that I can now create a couple different skin files to change the look and layout of those subgroups. Reading source of the spark panel, there are some calls within the mx_internal namespace such as getMXMLContent() which is a method of the spark group component, but which I have no access to.
Does the description above make sense? How can I create custom 'contentGroups' in my custom Flex4 component that can use nested mxml child components? Should I approach this a different way?
I've come across a potential issue that I think I will be able to solve, although it seems to be to be something that may already have a solution, so I thought it best to save time and check.
I'm basically looking to create a menu where the labels are highly detailed and visually pleasing. The problem is that each and every label needs to be dynamically generated so that the menu is shown in the correct language.
My issue is this: is their a method in flash of defining letters for use as a font that aren't just flat colours? Imagine taking each letter into an image editing program, applying some effects to it, then important them all into flash as graphics/bitmap data. Could those graphics then be defined as letters in a font so that, when the swf is handed the string, it can create the dynamic label from my lovely looking alphabet?
I have a few ideas on how to implement a system using arrays and swapping the dynamic textfields for dynamically created movies, but that would mean building it from the ground up, something which may not be necessary if something similar already exists.
Anyway, I look forward to your replies; this forums has unknowingly solved a large number of my problems in the past, and acted as a safety rope as I learnt AS3. Now that I am on this forum I will likely try and take some time to give something back and help out other beginners, at least I will do when my thesis is finished
I'm optimizing a PNG encoder for use within Flash SWFs (but I'm writing it in HaXe).I've so far managed to speed things up a fair bit, mostly by using speedy memory read/writes.While profiling my code, I noticed that about 75% of the time is spent in a single call to Flash's built-in compress() method, which uses the zlib algorithm (which uses DEFLATE in turn).I'm not too fussy about compression ratio, but faster compression would be awesome. So, I was wondering if it's worthwhile to try to implement zlib/DEFLATE myself. A little searching has turned up the zlibC.implementation source, but it's not exactly light reading (or easy to port!).Are there any simple implementations of zlib/DEFLATE that I could use as a starting point? I'd rather not have to wade through the two specs, especially since I don't know whether an implementation running in AVM2 could even perform as fast as the native Flash one in the first place.
I have a remoteobject within my main.mxml.I can call a function on the service from an init() function on my main.mxml, and my java debugger triggers a breakpoint.When I move the remoteobject declaration and function call into a custom component (that is declared within main.mxml), the remote function on java-side no longer gets called, no breakpoints triggered, no errors, silence.[code]
is there any way to create a custom css value for a component and have it available to the skin class that component is using? for example, if i define this in a css file:
[Code]....
is there a way to make myCustomValue available in the PanelSkin ?
I'm just getting started with custom events in a custom component. And I don't quite have the hang of it, yet. I've got a component with a button in it. When it's clicked, I want to call a function in the main app.
I'm making a UI for a component in Flash. I wanted to use Flex and have had no luck getting the onUpdate exernalInterface call to fire properly. I'm referencing the functionality described here: [URL]. First off, I can't embed the SWF in the FLA. It just won't start the Flex SWF. Even using the external swf, it seems that the onUpdate function is either called too early or not at all. Here's what I've tried:
Tying the externalInterfce declaration to the initialize, preinitialize, applicationComplete, and creationComplete events. Sub-classing my application and putting the externalInterface in the constructor. Neither of these options work. When I create a basic AS3 project in Eclipse and put the externalInferface in the constructor, it works as expected.
Here, I need to create custom component object, changing their element values and appending that custom component in VBox. What are the correct syntax to implement this one?
Our software team has been developing flash applications using AS3 (via the FlashDevelop IDE and the free Flex SDK). Recently, some members of the team started exploring FlexBuilder and Flex (wow... why did we wait so long?). The problem is that some folks continue to develop using pure Action Script 3 (FlashDevelop) while others are creating custom components in FlexBuilder. How do the AS3 developers use the Flex Custom components built in FlexBuilder in their AS3 Applications?
I used a FlexBuilder Library Project to create a custom component library (swc). The custom component is a control bar with text fields and buttons, etc.The vast majority of our team's code is done in pure AS3 I've successfully included my new SWC in the lib and build path in our AS3 project.I've also successfully instatiated an instance of my custom component, but for some reason, it will not display. I know it exists, because 1) the compiler had no complaints, and 2) I can trace property values of the custom component and get valid output from the trace statement.
trainer.games.board.MatchThree { import flash.display.Sprite; public class Test extends Sprite{
I am creating a custom component in Flex with extends the BorderContainer class, and I would like to be able to place additional content within the tagset when I use it in my main application, like this:
<components:CustomComponent title="Hello"> <s:Label text="If you have one enter it below:"/> <mx:Spacer height="15" />
[Code]....
This works just fine, except that my component definition had some additional things inside of it, such as a <s:Label/> and styling, which is replaced by the content within the tagset above when I go to use it.
If I do not put anything within the tagset, the content that was originally in the component is not replaced.
Is there a way that I can simply append additional content inside of the component when I go to use it, instead of it being replaced each time?
I created separate own canvas component for Home page, Contact page, Rules page etc.In my main application it has link button like Home,Contact,Rules in application controller(child state) . [code]...
I want my custom button to look like the button sample below. More specifically, I want the width of the button to be determined by the width of the largest word in the label (i.e. width of "Elongated" in my example). The label must wrap, not truncate. And I want only one pixel between the top edge of the icon and my button's top edge. I have tried lots of things but to no avail so far. I have reduced the horizontalGap and verticalGap to zero and padding to zero. But still nothing.
I have written a custom component for drawing a circle in Flex. But When I try to write a click event or mouseDown event for that component, it doesn't work.[code]...
The "Hello" Alert is displayed only at a particular point and guess is, at the point, (175,150) the x, y co-ordinates of the circle. But shouldn't it be displayed wherever I click on the MyCircle component?? how to enable it in that way?
Also the mouseDown function doesn't work for MyCircle,but if have the event for the VBox, the Alerts are displayed.
