I have a live encode to the media server with dvr enabled for H264/MP3 format. When I try to play the dvr cache stream, all I get is audio and no video. If I switch to VP6/MP3, the stream plays fine. If I do a live encode with no dvr, it streams fine. Does dvr with H264 work only when you flatten the file using F4V post processor tool? Will the dvr cache stream work if I switch to AAC instead of MP3?
View 3 RepliesWhat we would like to do is create an archive (f4v or mp4) on the FMS 4 server any live stream that is pushed from our endpoints. Primarily as a backup and if necessary - an editable file within CS4 or CS5.
We are at a University and capture lecture powerpoints natively and sometimes need to edit the files. flv is not enough and we would like to take afvantage of mp4 and the FMS server while we use it for overflow as a recorder.
I am trying to encode and stream live video. I have downloaded both the Flash Media Encoder and Flash Media Server. The problem i have now is, i can't able to connect to Flash Media Server. The FMS url is as default: rtmp://localhost/live. Do i have to purchase a FMS url? How do i make sure that my FMS is running/ activated?
View 1 Repliesclose another live stream B if opening when stream A is closed? Does FMS support this kind of logic?
View 8 RepliesI build a client side application where is only a FLVPlayback2.5 component and a short AS3 script.
[Code]....
My Encoder is setup with three streams: Vid: 500 kbps - Audio: 48 kbpsVid: 800 kbps - Audio: 48 kbpsVid: 1500 kbps - Audio: 48 kbps I start the encoder and everything looks fine in the log. In my browser (Safari or Firefox) I go to my html site and the stream starts after 6-8 sec. But anytime with the lowest bitrate 548 kbps and nothing look like the stream is switching to another bitrate. I tried it with the smil playlist and the result is the same. Only the lowest bitrate is plublished.
[Code]....
I'm having a problem with recording a live webcam stream. The last few seconds of the stream is getting cut off.
The recording is stopped with the following piece of code:
vid.attachCamera(null);
vid.clear();
ns.attachCamera(null);
ns.attachAudio(null);
ns.pause();
What could be causing this? Is the stream cut off too soon? Is the client unable to send buffered data to the server?
More specifically: I have a sequence of 32 bit unsigned RGBA integers for pixels- e.g. 640 integers per row starting at the left pixel, 480 rows per frame starting at the top row, repeat for n frames. Is there an easy way to feed this to ffmpeg (or some other encoder) without first encoding it to a common image format?I'm assuming ffmpeg is the best tool for me to use in this case, but I'm open to suggestions (the output video format doesn't matter too much).
I know the documentation would enlighten me if I just knew the right keywords... In case I'm asking the wrong question, here's what I'm trying to do at the highest level: I have some Actionscript code that draws and animates on the display tree, and I've wrapped it in an AIR application that draws BitmapData frame-by-frame. AIR has proved to be woefully inefficient at directly encoding this output- the best I've managed is a few frames per second, and I need to render at least 15 fps, preferably more like 100 fps, which I get out of ffmpeg when I feed it PNG images (AIR can take 1+ seconds to encode one 640x480 png... appalling). Instead of encoding inside AIR I can send the raw byte data out to an encoder or to disk as fast as it's rendered.
If you're wondering why I'm using Actionscript to render an animation or why it has to be encoded quickly, don't. Suffice it to say, the frames are computed at execution time (not stored as an animation in a .swf file, for example), I have a very large amount of video to create and limited time to do so, and using something other than Actionscript to produce the frames is not an option.
I'm trying to stream a HDS live multi-bit stream, it seems to push to the FMS but my player doesn't display the stream.Are these settings and files correct? The documenation is confusing on what and which files need to be edited and/or created.
Encoder settings:
Bit Rate: 150,500,700
FMS URL: rtmp://myserver/livepkgr
Stream: liveevent%i?adbe-live-event?liveevent
FMS 4.5
I see the following directories being created when I start encoding and each directory has a single file with a .stream extension in them. Are these correct? fC:FMS-HOMEapplicationslivepkgrevents\_definst_liveevent1[code].....
How i can record a live stream.
I need a very simple app that will connect to rtmp and record it. The app will be on the same server as the live stream.
Is it possible to live stream both RTMP and HLS with FMS 4.5?
I want flash users to have the least latency possible using RTMP, and iOS users use HLS.
How can i stream video live by the help of PHP like live tv? I am willing not to use flash media server. If it is must to use it then which server is free and reliable?
View 1 RepliesHow can i delete the Live stream that published by the client(the stream it's not working)
View 2 RepliesPossible to place or insert text on live video stream using the FMS?Whether with any solution or plugin.I am a web radio broadcaster and would like to have information on the screen like the station's phone number instead of having to keep reading it out all the time.
View 2 RepliesI'm having some trouble finding out how you can add metadata to a live stream. I'm streaming the webcam over fms and recording it in main.asc. So far so good. I have 2 applications. One that sends data and one that recieves data. The functionality is more or less like this example. The article says: "Note: If you record the video on the server side (a functionality of FMIS), the injected events are lso being triggered by the recorded file." That is what I want, but I have no idea how to make it happen. The problem is that I can't find any good examles for as3 and I have never looked into as2 (still new to flash in general )
View 1 RepliesI'm recording a lot of live streams for archiving purposes. Is it possible to somehow (programmaticly) get the timestamp of a certain point of such record?
View 3 RepliesWhen I use Adobe Flash Media Server 4.5 publish http live stream. I found a message from Server Log of Manage Servers of Adobe Flash Media Administrator Console. It says that "Failed to record live stream (disk quota exceeded)."
View 3 RepliesHow to create a script of some kind to grab a still picture from a live stream and save it as a JPG file?
In this way a cron job can tricker the script and thereby grab a picture fx every 10'th minute and the picture can be shown on a website so people that are not attending can have a look into what is happening in the live stream.
I was wondering how can I connect to a live stream camera like this one URL... or others if you know. And after I established the connection to load it in a movieClip and have it in full screen.
View 0 RepliesI'm just starting with ActionScript and I want to make an app, but I'm wondering that what I'm thinking of is even possible.Is it possible to make an app that receives a live stream from my desktop??
View 2 RepliesHow do you stream a live camera feed in a flash/actionscript file?What video format do you need to stream it in a swf?
View 1 RepliesCode:
var nc:NetConnection = new NetConnection();
nc.connect("rtmp://flashmedia.NunyaBusiness.com/live/");
var ns:NetStream = new NetStream(nc);
[code]....
I am using the above code for a live stream. My quesiton is how do I detect whether there is content being streamed and if not, to show a "Coming Soon" movieclip? I know that a listener would do the trick, but I have no experience with listeners in AS2.
I have a HD Camera streaming a live feed through FME 2.5 to FMS 3.0 using the VP6 codec and it works fine. I have now been trying to get the same stream running via H.264 and althogh FME 2.5 connects to the FMS 3.0 server and the stream starts with FMS 3.0 reporting the stream no problem. The Client application crerated with Captivate 3 using Flash Player 9 for publishing no longer dispays the video. Switching back to VP6 works again.
View 4 RepliesI'm running the Interactive Flash server 3 and I'm wondering is there a way to give people a user & password to limit who can live stream into the server.I can do this with the Real server and Windows media fairly easily but having problems figuring out how to on the flash server.Currently if you have the Servers IP and the flash encoder you can stream with no Username or password required. I would like to restrict this.
View 3 Repliesi have an urgent question for the following purpose. We plan to develope a solution consisting of a sender software for streaming live video to the streaming server. Now more than one client should be able to connect to the stream of the server. Because the different clients are connected with different bandwidth rates the server should be able to convert the video stream (e.g. the video width and height, framerate and quality) on the fly. Maybe a client with a better connection than DSL should get the video in a resolution
of 640x480, a DSL client should get the video in 352x288 and a client with ISDN in 176x144.
Is there a possibility to do this with the FMS server on the server with server-side ActionScript? Or can I limit the requested stream size on the client side? Or anything I can do?
I'm not sure if this is the right place to post but here goes. I'm looking to stream a live webcam on my website and have no idea where to start. I've been searching for a while and various things refer to Flash Media Server but this is costly and, as I will be streaming from University, it will probably be blocked on the network or take up too much bandwidth.
Does anyone know of a way to stream a webcam, without FMS or Quicktime Broadcaster etc.? Any free websites that provide this service could be possible, so long as the stream isn't available to anyone outside my website.
i need to stream a live TV Online. I have a computer with windows server 2003 and i wiil instal the adobe flash media server. I need to understand whow i can do this. I am a bigginer, what is the steps for i build a flash media server.
View 2 RepliesI don't find such API to indicate whether a stream is live or not.
Anyone knows how to judge this,either by client side or server side actionscript?
My fmis server is 3.5.4 and I use flvPlayback to play the fms live stream.
I want to let the live stream stopping status after be load completed.but after I set the autoPlay=false, the fms live stream is not stopping status after be load completed.
However I try the fms vod stream as the autoPlay=false ,is can stop .
what's different the live stream and vod stream. why the vod stream can stop but live stram can't stop?
Is there anyone who has a HTML example (or can give an URL with a page) that has the Adobe Flash player displaying a live stream (and not a file)?There is one in the installation under "Flash Media Server Start Screen" but it was too complex for me to understand. I just need a simple example on how to display a live flash stream in Adobes own web player.
View 1 RepliesI am sending a live stream over the web. I'm testing its performance and reliability, and I've noticed that after unpublishing and publishing the stream again, the video becomes very laggy - about 1-2 fps. It happens when the player has buffer bigger than 0. When buffer is set to 0, everything is ok, and after a short break (the moment when stream is unpublished), video is being played normally, like before the break (fps ~25).
View 4 Replies