Basically I have a FLV that has a custom seekbar and seekbarhandle that you can see in the below image. The seekbar and seekbarhandle are under the layer "seekbuttons". Everything works perfectly but when I fade the seek bar out at the end of the FLV the seekbutton doesn't disappear instead it stays on the stage which shouldn't be possible cause I put a blank keyframe where it is.
View 13 RepliesMy big question is how to access the instance of the "SeekBarHandle" of the seekbar component which is created at runtime? I have a AS3 project (flashplayer 9) with a FLVPlayback component and custom FLV controls, partially build from standard FLV control components (play/pause component, stop component, seekbar component, volumecontrol component). The FLV control components are added at 'root' level of the project. What I'm trying to do is to switch the visiblity of the custom FLV controls where the seekbar and volumebar are the party poopers because of the on runtime created handle bars.
I read many many threads about people trying to access the instances of the handle bars but for the most of us out there with no luck. I know that the instance of the handle bar is created at the same level as the instance of the seekbar component but I can't trace/access/find the instance of the handle bar. NOTE: I don't want to add the seekbar component to a container mc/sprite because of the changing width of the seekbar. When I do it's disformed because by the scaling of the parent.
[Code]...
I have 5 buttons that need to, when clicked fade the image in the background out and fade a new picture in. each of these buttons has a specific image related to it. how can i achive this smooth transition in and out for all of the buttons?
View 1 RepliesI have 2 buttons on the stage whose each MouseEvent load a different external swf when clicked. In an attempt to get the current swf to fade out and new swf to fade in on button click, I vainly added a Tween to the function but to no avail.
As it is now, when the movie starts, the button 1 swf fades in, however, when button 2 is clicked, the new swf is loaded but the old swf does not fade.
Code:
import fl.transitions.Tween;
import fl.transitions.easing.*;
var image:Loader = new Loader();
[Code]....
Does anyone know how to do this rollOver effect? [URL] Enter flash site and look at the rollOver buttons. I have the bar moving over each button but can't get it to fade out.
View 10 RepliesJust starting to wrestle with flash again, and i am trying to make a very simple website. I have made a graphic that will appear as the intro / splash page, and i want this to fade in... then appear as normal. Then when you click, i want it to fade out and load the rest of the site (yet to be made!)I am having difficulty making the fade in / fade out actions does anyone know how to do this? as i have seen it on many websites.
View 15 RepliesI have 3 buttons going around in a circle, in the middle of this circle I want a specific image to fade in for each button when you roll across it then fade out when you move off the button. I also want the button itself to change colour slightly when you roll across it. I've not had much look so far without the use of actionscript, but even with using it I'm not getting very far, I also seem to have a problem where once I have an image appear on the rollover of abutton that the image becomes part of the button, ie instead of the image just appearin when you roll over the button it appears when you roll over where the image should be appearing.
View 1 Repliesusing an FLV, with SeekBar component...works fantastic, but the scrubber clashes with my cuepoints when dragging along the timeline. So i want the scrubber to be inactive. Tried everything but can't get it to disable.disable this, I've looked everywhere, seems a few people have asked here but with no solid response
View 3 RepliesI would like to add a timer that keeps track of total time and also current time that runs next to my seek bar component for my flash movie. How can I do this? For example: 1:11 | 2:04 ... the 1:11 displays the current time of the movie and the 2:04 would represent the total time of the video.
View 20 RepliesI'm trying to figure out how I can add a seekbar to my netstream.I have the duration of the flv through metadata and the current time of the stream, but I can't understand how I should connect them to pass a position to a seek handler. And allso to be able to drag the handler to positions in the stream.
View 1 RepliesI am used to tweening to make buttons fade in, but how you do this using scripting that can be assigned to each button?
View 7 RepliesI have recently started doing a course in multimedia, and I have just started using actionscript for flash cs4. I have to build a small flash website as an assignment.
Its got an enter screen, with a company logo.
How do i get the button to fade in? ive managed to get everything els to do it.
I have not used flash in a while and im just trying to get a button to fade in and out when rolled over ... every time I export it, it just plays ...
View 1 Repliesi have a button that i would like to cursor over and that image slowly fades revealing the image behind and when the cursor is moved the image slowly fades in.
the coding that ive gathered so far from a few sources is as follows:
var fade;
mslogo_c._alpha = 0;
MovieClip.prototype.HitMe = function(goTo, returnTo){
[Code].....
I have a quick question regarding cue points. I am creating a file (flash CS3 using AS2) that includes an FLV video with cue points. The video is an FLVPlayback component (vs. a video object), and the cue points have been embedded in the FLV using the Flash Video Encoder. The video is a simple video capture of a person presenting a slide show. The video does not include the slides that this person is presenting. When the video plays and the cue points are reached, I have set slides (not part of the video, just separate elements on the stage) to appear on the stage, and change as each cue point is reached. The slides display at the appropriate point in the presentation, and this seems to work well.
The issue comes in with the scrubber. I am using the SeekBar component to show progress through the video and to allow the end user to scrub through the video, if they wish. However, when they scrub, the slides do not change. Meaning, if the user moves the scrubber forward or backward, the slide does not change to match the new location of the playhead, so the slides are out of synch with the presenter in the video. Is there a way to "read" the current cue point, based on the location of the playhead, so that the appropriate slides display at the proper scrubbed time in the movie?
I have a timeline that contains a video track and an audio track. I have created a working play button and pause button, but cannot get a seek bar or volume control to work. I cannot use ActionScript 3.0 because I have the video embedded into the timeline since I have hotspots throughout the video. How can I create a seek bar using behaviors/actions with actionscrip 2.0 to control the video/audio?
View 18 RepliesI have a seekBar component that controls a video clip. I want the seekbar to be invisible (alpha = 0) when the video first comes up,a nd then when someone rolls over the video, have the seekbar tween to alpha = 100; I got the seekbar to do this, but the handle on the seekbar is always visible and I can;t figure out how to control it. The id of the handle is SeekBarHandle, but when do something like SeekBarHandle._alpha = 0, it still doesn't work. I have searched the forums for an answer and can't figure it out. Has anyone had this problem before and know how to control the handle on the seekbar?
View 8 RepliesI've been programming with AS3 and done something that I haven't done before, Flash Video Player. I found some source code from this site and tinkered it a bit. Here's the script below.
ActionScript Code:[code]....
The problem is, when I move the scrubber, it doesn't load the duration accurately wherever I scrub it. If that makes sense? Is there something that I'm doing wrong? The width of the SeekBar is 728px.
How to add clickable video seekbar
when click on some area of the seek bar it should take the video seek to that position.[code]...
Is it possible in AS3, to have 0 alpha for some seconds, then have the buttons fade in... and I say buttons, as I have two of them. But wanted to finish it all of with a nice fade-in effect on my buttons. I've found some nice fade out effects with tweening in AS3, but I need fade in - and would like for me to decide when they should do this. So far I'm pretty satisfied with my first flash file, but I do like perfection!
View 2 RepliesI am using this code to for buttons to trigger the loading of images:
Actionscript Code:
};button1.onRelease = function() { infoField._visible = true; startLoading("image1.jpg");};button2.onRelease = function() { infoField._visible =
[code].....
I have button the dissappears when i click it, but instead of disapearing straight away, i want it to fade out first. Whats the script for this?
View 2 RepliesI have an animation with some sound attached to it from the library. I want to fade out the sound when the animation ends.. How do I do this? My code for starting the sound is:
var music:Sound = new Sound();
music.attachSound("mySound");
music.start(0, 5);
I used a template from adobe and modified it to fit my needs. Instead of one long video with cuepoints, I have several videos that I want to switch when the buttons are clicked.verything works great except when the user seeks beyond the buffer (progressive download).hen this happens, everything breaks. All of the buttons, playback, play/pause... everything. You have to refresh the page and start over.My quesiton is, does the seekBar need a custom eventHandler? Shouldn't it work on it's own? Here is my code:
import flash.events.*;import fl.video.*;
//-----------------// Video control assignment//-----------------
display.playPauseButton = play_btn;display.stopButton = stop_btn;display.seekBar =
[code].....
how to reference the SeekBarHandle? I'm using the seekBar component to control a FLVPlayback of course and am trying to reference the scrubber or SeekBarHandle.
View 1 RepliesI have an AS2 swf that loads FLV videos into a FLVPlayback component and attaches a seekBar component. When the video stops I unload the seek bar from the screen and set the FLVPlayback.seekBar = null. When another video is to be played I set up the seek bar again by attaching the seekBar component to the stage and assigning FLVPlayback.seekBar = newSeekBarInstance.
[Code]...
What Im noticing is that sometimes the seek bar is removed from the screen and sometimes it isnt? I cant seem to notice any pattern here. Has anyone had similar problems? Do I need to force garbage collection?
I'm fiddling around with the YouTube ActionScript 3.0 Player API. It's pretty cool and simple but one thing i can't seem to get to work, nor find any info on the web:
I want to use the SeekBar component with the Youtube API. I tried this, which works with the FLVPlayback component:
var seek:MovieClip = new SeekBar();
player.seekBar = seek;
my issue is with flash FLVplakback control with a seekBar attached to it. example can be found here. for some unknown reason when i try to rewind using the seekbar, it produces a loud noise at the start. whereas if i let it play out the entire movie (mp4) and then play again using the play button it does not produce such noise. in case i rewind using the seebBar after playback has completed even then it does not produce the noise.
View 1 RepliesI have a problem with my video player, I'm doing the video display through a seekbar appendBytes and I have but I can not make the video go to a certain point of view when I click on seekbar. I found that the problem is in how I view the video, which is the appendBytes.
View 1 RepliesI'm trying to provide a seekbar for a FLVPlayback. I have MovieClips (Graphics) for the base bar, fill bar and thumb. How can I attach these MovieClips to the FLVPlayback using AS3 code? Do I have to create a skin, if so then how? I'm using the Flash CS4 (Not Flex).
View 1 Replies