I have FLV video component waiting for the user to push play. However, I want a thumbnails that I can stick in there because it is just black. How does this work with the FLV playback component? I can't find anything about this.
[URL]
i am trying to get a preview image to appear when using the flvplayback component. it does not show up within the flash player or when i test on a server. i was able to use the component inspector to find the image i wanted and export and save it. i saved the png file in the same directory where my flv is located. here is my AS:
Code: Select allimport fl.video.FLVPlayback;
var flv_video_mc:FLVPlayback = new FLVPlayback();
flv_video_mc.source = "flv/video.flv";
flv_video_mc.preview = "flv/video_preview.png";
[code]....
I've been customizing the flvplayback component and have run into a problem. So far I have successfully created a custom skin for the flvplayback component, with a play overlay button,which loads the FLV dynamically from flashvars.I am now trying to load in a static image which appears until the video is played.I've been looking around the internet and in the Adobe forums, but haven't found what I'm looking for.I thought perhaps the Preview min the AS3 flvplayback component would help, but this won't work apparently.
I was thinking myPlayer.source = "image.jpg"; but then how can I change what the source is once someone clicks on the video? I also found fl.video.VideoEvent, but I'm not sure how I can use this to set the image as the source, until someone presses the play button, or until the video is playing (note that I am using an overlay play button which shows up whenever the movie is paused, so once the video starts playing, I would not want the static preview image to come up again...just until someone clicks the any play
button).
I have found something good here. [URL]..The mouseover effect on the list item is good. Any ideas to make this look.. I can infer that this is happening on mouseover of the Image Component. I think this is similar to google image search preview of images. If anyone have come across a component similar to this kindly share it to me and to all.
View 1 RepliesI am creating a video player that sets up a preview image before it begins to play. If I set the preview image in a loader within a container it works, except if I change the size of the preview.jpeg that is being loaded into it. It loads the image into the loader, within the container, but then scales the container making the image smaller than I need. I want it so that the preview.jpeg can be made by anyone at any size and the image be scaled to sit over the video. Unless the vidWidth and vidHeight are equal to the preview.jpg the image doesnt show up, just blank ??
Code:
var vidWidth:Number = 300;
var vidHeight:Number = 240;
var preview_Loader:Loader = new Loader();
var preview_URL:String = "preview.jpeg";
var preview_Request:URLRequest = new URLRequest(preview_URL);
[Code] .....
returns: ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
This only happens when I try to set the index of the preview_Loader? I need it to be the second mc from the bottom. I set up 2 functions to load the image. The first doesn't allow smaller images to be loaded into the container and make them the correct size. While the second makes them dissapear if I change the size.
I've searched high and low and haven't been able to figure out a way to set a preview image for video I'm loading in using the mediaPlayback component. Using Flash CS4, AS2.
View 1 RepliesThere seems to be very little information on developing a custom component with live preview.So far i've created a swf whose application class extends UIComponent.I've also created a custom component.Then I've added the Live Preview field in the custom component's Component Definition.What I would like to do now is reposition elements within the preview swf when the user resizes the component.
To do this i need to know two things - 1 what event to listen for when the user resizes the component, and 2 the current dimensions of the resized component.
1. My only success was that ComponentEvent.SHOW seems to dispatch when the user resizes the component. (i had no luck with any of the RESIZE events - Event.RESIZE etc)
2. However the width/height properties don't seem to change on resize, they stay at the original dimensions of the component.
I've created a class in AS3 which I've linked to a component in Flash CS5 and exported as a SWC. That SWC is then loaded into my main flash file and used inside some movieclips. The issue is that I want some code in the class to be used when using the component in Flash CS5 (for previewing purposes) and some code to only be used when running the main swf. Is there any way to detect when the class is being used in Flash CS5 vs being used when running the swf?
WikipediaWictionaryChambers (UK)Google imagesGoogle defineThe Free DictionaryJoin exampleWordNetGoogleUrban DictionaryAnswers.comrhymezone.comMerriam-Webster<>0wvcidfjoguarmL
I'm having a problem with component live previews. If I just create a movie clip and set the live preview, all instances of the clip i put on stage update separatly from each other (their live preview that is). As soon as I change the clip to a component (export .swc or compiled clip) all the instances update together. eg if i set the component parameter 'title' - all titles of the all the instances on the stage will change. This didn't happen when it was just a movieclip - all instances changed separatly as i set them.
View 1 RepliesI've created a swf for a component live preview. The live preview appears to work ok when creating a new component, and setting the live preview in the component definition panel.
When I update an existing component definition (in a separate component library FLA) the live preview does not work. The strange thing is if I copy the entire (component FLA) library and paste it into a new FLA it works fine (although in doing so I receive a whole bunch of errors in the output window saying - Plugin tool script error in method ik_isIKContainer).
I've imported an offline video to my Flash CS4 movie.As it is, the video window is black with the play controls.How do I make it show a snaphot of one of the video frames so it's clear what the video is about?
View 1 RepliesDoes anyone know how this site might have done their video rollovers?
[URL]
I'm building a site which will incorporate a CMS (possibly FlashMoto) and am trying to find out if its possible for the 5 second clips to be automatically created from the original videos? Or perhaps another way of doing it?
Using Flash cs5I have a simple swfnothing on the stage except a video (flv) playback component.I dont want it to autostart which i see the paremeter for and have set that to uncheckedBut I would like pick a place in the video to be the thumbnail image for the video that people see instead of just a black box. I dont see how to do that.Is there any way to have them see a thumbnail image in the video player instead of a black box when i dont want the video to autoplay?
View 2 RepliesI have a video that does play when I preview it in Flash, but does NOT play when I preview it in .html. I've gone over the publish settings, and I think they are correct. This was working fine awhile back, but isn't working now.
[URL]
I am working with an AS2 application that was put together a while back. The app is used to publish a live video stream to FMS. I am using the Camera class to connect to a local camera (Camera.get()) and to setup the encoding specs for the stream that is to be published to FMS. To preview the camera signal, I am using Video.attachVideo() to attach that camera output to a Video instance on the stage. This is all working greta for me. But here's the thing. The video stream that is being pumped to the Video instance is the direct signal from the camera. Nice and clean. I seem to remember that there is a way to view the video signal with the encoding settings applied to it. It's just one little line of code, if I remember correctly. However, I can't seem to find the code that will do that.
Can anyone quickly share the code that will allow me to preview the encoded video stream?
want to be able to do is have a preview image pop up while hovering over a part of my videoplayer (the seekbar), and have this image change based on where the mouse is. The ultimate effect is that users can roll over the seekbar and get image previews corresponding to where they mouse is in the seekbar. I've seen this on some sites, but am not as to go about tackling it.
View 3 RepliesMy searches have led me into some overcomplicated solutions. I'm using Flash to create a simple .swf that contains a movie with subtitles. I'm sure there are better ways but this is the easiest and I have been too long gone from developing in Flash and uBer rusty.
I used the movie importer, added captions exported my movie. All works great. The movie is set to NOT auto-play though and fades in from black so when the user first sees it they just see the skin and a black box. What I would like to do is have a preview image appear instead of the black first frame until the user plays the movie.
I have a AS3 project, which shows a map (based on OSM) and prints some information on the map. Now I would like to have a thumbnail for this map.
I've tried [URL] to generate a screenshot of the whole page, the problem is when bitpixels takes the screenshot, the map isn't fully loaded.
Is there a way to say something like DisplayObjectContainer.exportToPNG?
I have been hunting for quite some time now and I can not find anyone that knows how to create a preview image for an FLV. I.E. youtube, they show you a part of the clip you are about to watch and not the first frame.
View 7 RepliesI am trying to hide a preview that I inserted with some AS3. The preview works and I use this code to create it.
var preview:Loader = new Loader ();loadPreview (preview, "gotgame.png");
addChild(movie_flv);
function loadPreview (loader:Loader, previewFile:String) :void {var u:URLRequest = new
[code]......
I have found a nice free flash template to use for a portfolio site but I want to add something small to it but could not figure it out myself.The free templates creates a thumbnail preview of the image and I want to be able to create a full size preview off in another area. I will post the AC3.0 and an image to explain.
import caurina.transitions.Tweener;
slider_info.text = "loading data...";
link_title.text = "";
[code].....
LIke youtube, they have a preview image of the flash video.How do i get flash using actionscript to dynamically generate a image realtime? how do i convert any file to an flv through the internet? dont worry, i'm not trying to beat youtube,i'm doing this for a music studio website. I heard of this ffmpeg.exe....how to use this? Do I put this on my webserver? I use the paid yahoo webhosting.
View 8 RepliesI have found a nice free flash template to use for a portfolio site but I want to add something small to it but could not figure it out myself. I hope that somehow could help me out. The free templates creates a thumbnail preview of the image and I want to be able to create a full size preview off in another area. I will post the AC3.0
[Code]....
I'm looking for some flash based plug-in which allows me to display an image as soon as the user selects it in the file dialog.I looked at swfupload but couldn't find any way to display the image selected.. no handle on file path or contents as far as I could find.
View 1 RepliesI am working on a Media up-loader which uploads images to Server. Before start upload file i want to show small thumbnail of Image.
I used Loader class to load image selected by user & used Canvas to draw image on it.
This works fine with images like jpg & png.
But for bmp file loader class doesn't work.
Is there anyway to load bmp image in Flex & Convert it to BitmapData ??
I'm having a problem with a movieclip variable
function previewLoaded(e:Event):void
{
var previewArea:MovieClip = new MovieClip();
[Code]....
This coding is located inside another movieclip because I'm trying to have a mouse over show a different preview area in another area of the flash. It's as if the movieclip isn't being recognized but I just can not figure out how to get it to work. I've been on this problem for 5 days and I would really like to get my website up and running.
I am developing a web application. where user can record video, audio and can take photos.
The recording is working fine. but only upto 70% of video is recording. How can I know the video progress?
Is it possible to show a progress bar both on recording and preview video?
I'm having timing problems with a music video I am working on. The framerate it 24fps which for a 22 second animation should give me 528 frames. However, In the preview of the slides the 22 second mark on the sound is reached by about 310 frames. What's more, the 22 second point in the sound is reached at a later time in an exported swf movie, but still not 528 or 310. Why is the timing different in all viewing modes, which one should I use to time my video or how can I set them to all display the video at the correct timing?
View 2 RepliesI need to play preview video first, before starts play any other video. I am using jw player
View 1 RepliesIt seams no matter what publish settings I use the image quality of JPGs in my flash movie is poor (see linked image) Am I missing a setting? how do you get really crips, clean, beautiful image preview in Flash?
View 2 Replies