I have a video that does play when I preview it in Flash, but does NOT play when I preview it in .html. I've gone over the publish settings, and I think they are correct. This was working fine awhile back, but isn't working now.
[URL]
Following embed code is from [URL] but it doesn't work in Internet Explorer 8. Firefox no problems. Any recommendations for improvements?
[Code]....
UPDATE 2010-05-14: If I'm not mistaken HD.se uses Flowplayer and all those flasvars are for that. Perhaps someone here is good with Flowplayer? I've never used it myself.
why the buttons in the flash banner I created in Flash CS4 work when I preview it in either Flash or HTML in the Flash CS4 program, but when I go to load it into a html document in Dreamweaver CS4 and preview it in a firefox or IE browser, the banner comes up fine, but the buttons this time will not work. The buttons are displayed with there animation and sound, but the links will not work. I have tried scripts in AS2 and AS3.
View 3 RepliesI'm having some trouble with getURL (I think). It works fine when I preview with Flash's html preview but it's not working on my server. It's pretty simple. [URL].selected1 is a user-defined variable pointing to a page: ie, when the user selects variable page1 the page to be opened is [URL]. Like I said, it works with Flash's preview, but not on my server(no 404 or any response). Does there seem to be a problem with my code or might I be overlooking a server error? Here's my code:
[Code]...
I have a flash file (main.fla) that contains an empty movie clip which has the action :loadMovie("myMovie.swf");When I test the movie in Flash it works fine.It also works fine when I have Flash closed & just open the (main.swf) file.And, of course, the loaded movie (myMovie.swf) plays fine too.HOWEVER, when I embed the main movie file (main.swf) into an HTML page, it will NOT load "myMovie.swf" like it's supposed to.Note: when I embed "myMovie.swf" into the HTML page, it works fine.
View 4 RepliesI've got some HTML text in my XML which i load in flash. But when i try to use an image as a link using <a href="http://site.com"><img src="img.jpg"></a> nothing happens when i click the image. Links work fine unless the image is wrapped in the "a href"-tag. Anyone know how to solve this?
View 6 RepliesI am having problems using the simpleZSorter by Ralph Hauwert. The "stanalone"-swf is working fine. If I put it in an HTML document, everything still works EXCEPT THE Z-SORTING.
I also attached a file which should show my problem. Just compare the order of the rectangles in the swf standalone and in the HTML document.
Somehow the FLA becomes too larger so I cannot upload it here. But this is the code:
stop();
import com.theflashblog.fp10.SimpleZSorter;
this.addEventListener(Event.ENTER_FRAME, sort);
function sort(e:Event):void
[Code].....
just downloaded the flash cs4 trail, very nice some of the irritating IDE bugs are gone that i had on my mac, and didn't had on windows. but enough of that
The first project i checked out, a bug jumps up.when you create a texfield on stage, make it html text. set it to verdana or arial regular, emded the basic symbols.give the textfield a name and try to make some bold text using actionscript.
Code:
my_textfield.htmlText = "regular text, <b>bold text</b>"
preview it and every thing stays regular.the only way to get right is to embed the font styles in your library. but for some of the more special symbols, that's not good enough.that's the only reason i re-installed flash cs3, after thinking maybe that was the problem.
Kirupa's tutorial on how to use Flash to target a certain frame in HTML doesn't work any more. The page opens up in a new window instead of in the targetted frame. This is the code that is used: on (release)
[Code]...
I have a flv that is loading from a subdirectory off my flash swf.Everything works fine when I load the video from [url].....However, when i start the video from mysite.com, the video is not located.What can i do to remedy this? I'm not using an absolute url in the component parameter inspector.For example
myVidDirectory/myvideo.flv
should I use a different path?
why my flash video player doesn't work in Chrome while it perfectly works in other browsers ? (Firefox and IE)
View 1 RepliesI am using Video (actionscript-controlled) component in my videoRecorder swf. What it does is it connects to webcam, record the video. This works fine. The problem comes when playing the flv back.After user stops the recording, I am using the same video component to play back the flv. But, it doesn't work. Checked the url, and its fine.When I use the same flv url in any flv player, the video gets played back. Am I missing something? Or Video (actionscript-controlled) can't handle playback videos?[code]
View 0 Repliesusing an old file that utilizes actionscript 1.0. I tried placing a video component into the file and it doesn't work. This leads me to believe I need to convert my old actionscript 1.0 to at least 2.0. The old actionscript simply moves a movieclip at certain intervals when the play button is pressed or the slider bar is dragged. When I exported the movie using 2.0, the following errors occurred in the compile errors box.Here is my actionscript that causes these errors.
[AS]
// playhead button coordinate
trace(_root.playheadBtn._x);
// playhead button moves strip[code]......
I have a video in a frame that corresponds with the label "eight". i have a button on the timeline with the following code. i've tried it both gotoAndStop and gotoAndPlay and it doesn't work.
on (press) {
gotoAndStop(eight);
}
Ive made a movie that add strings from several input text fields to an array. This array is sent from the flash video to php. This is working fine when I preview the movie as Flash. The php script prints the variables as intended.
But when I preview it as html the arrays are all empty...
[AS]
on (release) {
number_of_attr1 = main._currentframe + 1;
suggestions1 = new Array();
[Code].....
I am using progressive streaming with VideoDisplay, the HTTP URL provided gets buffered completely even if I have configured it to start playing the video when the buffering reaches 20%, the trace message shows that the playing started(using mozilla /Flashbug+Firebug), but it doesnot show the video till the buffercounter reaches 100% How can I get the video stream to play at the 20% of stream.Code Segment where the check takes place
var loadedPct:uint = Math.round(100 * (event.bytesLoaded / event.bytesTotal));
trace('waiting...');
mainVideoCanvas.addChild(LoadingImage);
VidLoadingLabel2.text = loadedPct.toString();
[code].....
I�m in the process of creating a flash intro to my website. The problem is, whenever I preview one of my Mask layers by pressing Ctrl+Enter, the mask effect doesn�t work � it merely shows the masking object.
The puzzling thing for me, which leads me to suggest that the mask should work is that in the normal timeline view, when I lock both the mask and masked layers and press Enter or slide through the frames � the effect works perfectly. On Ctrl+Enter all of my other Masks work fine as well - the one in question has text as the mask content.
It only stops working when I view it as an .swf file or play the movie with Ctrl+Enter. Does anyone know why this is happening, how I can get around it, or whether it will be a problem when published?
I'm relatively new to Flash, and I�m in the process of creating a flash intro to my website. The problem is, whenever I preview one of my Mask layers by pressing Ctrl+Enter, the mask effect doesn�t work � it merely shows the masking object. The puzzling thing for me, which leads me to suggest that the mask should work is that in the normal timeline view, when I lock both the mask and masked layers and press Enter or slide through the frames � the effect works perfectly. On Ctrl+Enter all of my other Masks work fine as well - the one in question has text as the mask content.
It only stops working when I view it as an .swf file or play the movie with Ctrl+Enter. Does anyone know why this is happening, how I can get around it, or whether it will be a problem when published?
I have recently received a copy of the Adobe eLearning suite, in particular I hope to use Flash for the majority of my elearning projects.I have been having trouble using the learning interactions that come ready to use with Flash. For example,I placed the drag and drop interaction onto the stage area, but when pressing F12 to preview and use this feature it would not work (could not drag the movie objects), the same goes for all the other features I can select radio buttons etc but when pressing the 'cheack answer' button nothing happens.Even though these interactions come with instructions which i have followed, it still does not seem to work. I do not wish for them to be scored, I just want the user to receive correct or incorrect feedback.
View 1 RepliesI am using a FLVPlayback to play a video on my project. Path to the video file is taken from xml file and loaded to FLVPlayback by action script, everything work properly in swf file.But when i publish this file and play as html, the movie never start. What can be wrong?
View 2 RepliesI have an FLA file and movie and wish to upload the movie file to a server. However, when I click File | Preview in HTML the HTML file fails to generate (I see only the background colour of my FLA in my browser).
View 3 RepliesI'm looking for some flash based plug-in which allows me to display an image as soon as the user selects it in the file dialog.I looked at swfupload but couldn't find any way to display the image selected.. no handle on file path or contents as far as I could find.
View 1 RepliesIve made a movie that add strings from several input text fields to an array. This array is sent from the flash video to php.[code]...
View 1 RepliesI've imported an offline video to my Flash CS4 movie.As it is, the video window is black with the play controls.How do I make it show a snaphot of one of the video frames so it's clear what the video is about?
View 1 RepliesI decided to try to use setInterval for myanimation, which is just a mouse trail.However, I'm trying to get teh mouse trail to be a dynamic mask.In my previous swf this was achieved by using a holder mc with the animation inside and then using this as the mask. But this time I just canpt seem to hit on the right way to get it to work. The code I am using for the mouse trail is:
Code:
var i:Number = 0;
var myInt:Number;
var t:MovieClip;[code].....
in the function, but now the trail doesn't resize and the mask still doesn't work.
i made a simple nav bar with a dropdown menu it works fine in flash mode and preview but when i try to embed into html it only show the nav bar but not the dropdown menu.
View 4 RepliesDoes anyone know how this site might have done their video rollovers?
[URL]
I'm building a site which will incorporate a CMS (possibly FlashMoto) and am trying to find out if its possible for the 5 second clips to be automatically created from the original videos? Or perhaps another way of doing it?
Using Flash cs5I have a simple swfnothing on the stage except a video (flv) playback component.I dont want it to autostart which i see the paremeter for and have set that to uncheckedBut I would like pick a place in the video to be the thumbnail image for the video that people see instead of just a black box. I dont see how to do that.Is there any way to have them see a thumbnail image in the video player instead of a black box when i dont want the video to autoplay?
View 2 RepliesI have FLV video component waiting for the user to push play. However, I want a thumbnails that I can stick in there because it is just black. How does this work with the FLV playback component? I can't find anything about this.
[URL]
I am working with an AS2 application that was put together a while back. The app is used to publish a live video stream to FMS. I am using the Camera class to connect to a local camera (Camera.get()) and to setup the encoding specs for the stream that is to be published to FMS. To preview the camera signal, I am using Video.attachVideo() to attach that camera output to a Video instance on the stage. This is all working greta for me. But here's the thing. The video stream that is being pumped to the Video instance is the direct signal from the camera. Nice and clean. I seem to remember that there is a way to view the video signal with the encoding settings applied to it. It's just one little line of code, if I remember correctly. However, I can't seem to find the code that will do that.
Can anyone quickly share the code that will allow me to preview the encoded video stream?