I'm having problems with my flash game, i am making slimeball and im using the hitTest to make my ball bounce off of the players, but because my players are semi circular when it hits off the back of my player the ball still goes forward when it should bounce off the player in the direction that it came from, if that makes sense
[Code]....
i wanna ask how do i make a ball bounce off something like a ball bouncing off a bumper in a pinball game? i've tried a lot of times but everytime the ball get stucked to the box and it doesn't move anymore...will be grateful if anyone noes the actionscript of it..
View 3 RepliesI'm trying to make a ball to bounce on something realistic.How can I make it work? It's impossible.
View 3 RepliesI followed the bit101 tutorial on gravity and now have a movie clip called "ball" (instance name) with an embedded invisible button (so you can throw it all over the place).I also have a movie clip called "block1" (instance name too! what a coincidence, isn't life lovely). I want to make them collide, and make the ball bounce away.
View 1 RepliesSo I am trying to get a ball to move around the screen, and when it gets to the walls of the stage I want it to change directions. So far, I have this code:
Code:
import flash.events.Event;
var ballVelx:Number = Math.random() * 15;
var ballVely:Number = Math.random() * 15;
var ballDirx:Number = 1;
[Code].....
This is not in the main timeline, it is in the symbol timeline for Ball. With this, I have the ball moving around and when it reaches the end of the stage it resets with a random velocity/angle. When I uncomment the ballDirx and ballDiry lines and comment out the this.x = 0 line, the ball doesn't change directions, it just stops moving when it reaches the end of the stage.
I haven't done much actionscript stuff ...and at the moment im trying to make a ball bounce across the stage, but im unsure how to go about doing that.
View 3 RepliesI haven't done much actionscript stuff ...and at the moment im trying to make a ball bounce across the stage, but im unsure how to go about doing that.
View 3 RepliesI cant figure out how to make the ball move and bounce around the stage. and i also need help on the paddle that the ball bounces off of. if u could help me out that would be awesome.
View 11 RepliesI am familiar with hit test, but how do you make a ball bounce off a wall with the same angle that it bounced on it with?ex. it hits the wall at 45 degrees, and it bounces off the wall at 45 degrees
View 6 Repliesi want to make a ball move at a constant speed into a wall and bounce of, initially it should move back but then It should carry on moving towards the wall.
I managed to make it bounce but once it hits the wall it carries on in the opposite direction!
I followed this tutorial to make a bouncing ball in flash. Its AS2 so it took me some time to make it work in AS3 Now I want to make the ball roll down a slope, fall and bounce when it hits the ground. I have attached my .fla.
View 1 Replieshow to make the ball move and bounce around the stage. and i also need help on the paddle that the ball bounces off of.
View 11 RepliesI have this code to make a ball bounce. it works fine, however, everything on the stage bounces. I only want the ball to bounce.
Here is my code
/* Actionscript 3.0 Bounce Effect. ball = movieclip instance name*/
var velocity = 0;
var gravity = 2;
var speed = 0.03;
var ground = 300;
Object(this).ball.addEventListener(Event.ENTER_FRAME, fl_bounce);
function fl_bounce(event:Event) {
[Code] .....
I'm pretty new to Flash and I've ran into a bit of an issue. I'm trying to convert a AS2.0 code into a AS3.0 code, more specifically I'm following this guide:
[Code]...
I'm making a ball that are going to bounce realistic..But it doesn't!
View 4 RepliesI have used this code for getting a circle going from the top and down...
Now i want it to bounce back to the top but i don�t know how to integrate it to the code.
onClipEvent(load){
myscale=290;
}
onClipEvent(enterFrame)
[Code]....
If anyone will explain how the code works(cause i�m no good at this Action Script),- i will be glad.
Just getting it to spin off and react realisticly with the wall would add a whole new dimention, but its a bit beyond me (*noob!*). It calls for some collision recognition I think, but the forums I've read so far on the topic are just too complex. My aim is also to also bounce the ball off the cursor.
View 3 RepliesIn the process of making a pinball game, i wanted to set up a system where a ball would bounce on an object, and eventually come to rest on it. Everything works fine, but eventually the ball just goes through it instead of coming to rest on top of it. I do not understand why this happens, and would like to know if there is anything i can do to fix this. The .fla is attatched.
View 4 RepliesThe game is like any other pong game with one differance. Rather then the paddle only moving left and right, it would move in a circle around the play field and you would not be able to rely on the walls to keep your ball in play. My problem is that I cant get the ball to bounce off of the paddle at the correct angle. Below is a link of the swf and fla that I have now.[code]
View 7 RepliesI make this simple system to simulate a collision of a block in "walls" and bounce like a pong ball. To use drag the orange square and release to start the movement. But I have a problem, sometimes the collision not happen and the block go through the walls, I try less the time of setInterval that verify the collisions but not solve my problem.
collision system -> [URL]
So in my level 1, here's what I wanted it to look like:on enter frame, a few of my "drag-gable" buttons are going to fall to the ground, bounce a little bit and stop when they ran out of speed.Attached the file that I've already scripted the drag n drop on each button, now how do i script the "fall to the ground part"?
View 0 RepliesI have recently started to learn about flash and as2 and I am working on a small shooting style game. I have managed to create a hero that moves around the screen and enemies which I shoot at. The issue I am currently having is that on my ball movieclip (bullett) the first frame holds a ball and the 2nd frame is a small animation of the ball breaking apart. So basically when the ball is thrown and the hittest comes back true the 2nd frame plays showing ball breaking apart. Now when I fire a 2nd time it constantly plays the 2nd frame of the broken ball. How can I restart the ball movieclip in its 1st frame to carry on shooting normally.
Below is the as2 I have on my ball movie clip.
onClipEvent (load) {
var statee;
statee = "ready";
maxJump = -30;
grav = 0;
gravity = 1.5;
[Code] .....
I'm making a game where the ball bounces off several walls to get to its destination: the portal. When the ball reaches a high speed it glitches through most of the walls.Here is my scene for the 3rd level of my game where the most glitches occur (attached file)In the picture there lists all the variables i put in the objects. You will also notice that I put a "Stuck" button since there were many glitches.[code]
View 2 RepliesI am currently working for a highscore system for my games website. and i have written the code for that. it only displays 1- players. i want to display overall top players when i click on top players url and want to display the monthly top 10 players when i click on monthly top players url.How to do this. i am trying since 2 days. i am struck at this point. kindly do look into this. the code as follows. For reference kindly look inot this. i need like this.[URL]
<?php
include_once("_data.php");
$game_name = "test";
$db_table = "newhs_" . $game_name;
[Code].....
I'm trying to make a scoreboard of players.It works fine for strings (like the username) listing like:
User1
User2
User3
etc
using in PHP to seperate them. (Using Flash,PHP,MySQL Integration)This is how I get them from the db in PHP:
PHP Code:
while($row = mysql_fetch_array($result)){ $rankPos .= $nrow . "
"; //# Position $rankUser .= $row['user'] . "
"; //Username obviously $rankN .= $row[$rankBy] . "
[code]...
The problem with this is, when flash receives rankings such as time, they are seperated by newlines () which makes them strings instead of integers as they rightly should be.
I'm using a time to string function to convert the time as integer (getTimer()) to a format HH:MM:SS It's fine ranking the times in the getTimer format but it all becomes a mess when trying to display the string format instead. (Considering times for all players are linked in the same string passed by PHP as time
time
time
time (000000
[code]...
The reason they are split with newlines is because the rankings are displayed in a single dynamic text.I tried converting each time in flash using the int function, but what would you do for newlines? The time rankings just comes out as '0' because of the newlines.I've also tried using this following function to remove the newlines and then possibly put each time into an array.
Actionscript Code:
function time(input){ timestr = ""; for(i=0; i<input.length; i++){ if(input.charAt(i) != " "){ timestr += input.charAt(i);} } return timestr;}
[code]...
What would I check for in order to get each time into an array?Though I'd much prefer using a much more efficient and easy method for display high scores.
Okay, so I have a movieclip of a letter (done in photshop to look like jelly). I want to animate it to fall from above, bounce on an invisiable plane, squash when it hits, and squash and go back up and decrease it each time until it comes a rest.I have the bounce but I need to squash.
Code
Code:
onClipEvent(load){
[code].....
I am just restarting my flash adventures and am trying to learn AS3. I can a real quick code request. I am trying to make a MC bounce off the sides of the stage. When I use the following code, the MC gets stuck going -2 then +2 at the edge of the stage.
[Code]....
How do I get it disregard the first part of the if/else and then go the other direction? know this is a really beginer question,
ive been working on boucing code and ive got this
onClipEvent(load) {
gravity = 2;
speed = 0;
}
onClipEvent(enterFrame) {
speed += gravity;
[Code]...
this will make your movie clip bounce. that i need to know is why does it bounce. i cant quite get my head around it. i start of and accelerate, hit 300 on the stage but then go up decreasing my speed by 0.8 every frame..
I have this game, got various levels. The point of the game, is you have to shoot all the zombies in the level to proceed. But I need it so the 'cannonball' bounces of the walls so there is more of a chance to hit multiple zombies.
Incase you wanted to see my document class here it is below.
package {
import flash.display.*;
import flash.events.*;
import flash.text.TextField;
[Code].....
for (var k:int = 0; k < 1; k++)
{
money = new Money;
[code].....