i want to make a ball move at a constant speed into a wall and bounce of, initially it should move back but then It should carry on moving towards the wall.
I managed to make it bounce but once it hits the wall it carries on in the opposite direction!
I am familiar with hit test, but how do you make a ball bounce off a wall with the same angle that it bounced on it with?ex. it hits the wall at 45 degrees, and it bounces off the wall at 45 degrees
View 6 Repliesi wanna ask how do i make a ball bounce off something like a ball bouncing off a bumper in a pinball game? i've tried a lot of times but everytime the ball get stucked to the box and it doesn't move anymore...will be grateful if anyone noes the actionscript of it..
View 3 RepliesImagine loop that contains a ball_mc that bounces off walls for how ever long the loop. I am asking what the math part would be to make the ball_mc bounce off at the correct angle and such.
View 1 RepliesI'm trying to make a ball to bounce on something realistic.How can I make it work? It's impossible.
View 3 RepliesI followed the bit101 tutorial on gravity and now have a movie clip called "ball" (instance name) with an embedded invisible button (so you can throw it all over the place).I also have a movie clip called "block1" (instance name too! what a coincidence, isn't life lovely). I want to make them collide, and make the ball bounce away.
View 1 RepliesSo I am trying to get a ball to move around the screen, and when it gets to the walls of the stage I want it to change directions. So far, I have this code:
Code:
import flash.events.Event;
var ballVelx:Number = Math.random() * 15;
var ballVely:Number = Math.random() * 15;
var ballDirx:Number = 1;
[Code].....
This is not in the main timeline, it is in the symbol timeline for Ball. With this, I have the ball moving around and when it reaches the end of the stage it resets with a random velocity/angle. When I uncomment the ballDirx and ballDiry lines and comment out the this.x = 0 line, the ball doesn't change directions, it just stops moving when it reaches the end of the stage.
I haven't done much actionscript stuff ...and at the moment im trying to make a ball bounce across the stage, but im unsure how to go about doing that.
View 3 RepliesI'm having problems with my flash game, i am making slimeball and im using the hitTest to make my ball bounce off of the players, but because my players are semi circular when it hits off the back of my player the ball still goes forward when it should bounce off the player in the direction that it came from, if that makes sense
[Code]....
I haven't done much actionscript stuff ...and at the moment im trying to make a ball bounce across the stage, but im unsure how to go about doing that.
View 3 RepliesI cant figure out how to make the ball move and bounce around the stage. and i also need help on the paddle that the ball bounces off of. if u could help me out that would be awesome.
View 11 RepliesI followed this tutorial to make a bouncing ball in flash. Its AS2 so it took me some time to make it work in AS3 Now I want to make the ball roll down a slope, fall and bounce when it hits the ground. I have attached my .fla.
View 1 Replieshow to make the ball move and bounce around the stage. and i also need help on the paddle that the ball bounces off of.
View 11 RepliesAttached is the red blood cell (rbc) animation. Each rbc is derived from the same symbol under multiple instances. And they all move randomly in the same x direction at random speeds. Unfortunately, I am unable to code for an arterial wall (ie. a boundary) so some of the rbc's end up leaving the animation at the wrong point (eg. from the top and bottom, instead of the right side).
I have two boundaries (named "top" and "bottom") but would like some help with AS2.0 to make these boundaries active rather than a part of the background. The code is inserted below, however it may be better to take a look at the actual fla:
amountOfrbcs = 220;
rbcsize = 240;
rbcWidth = Stage.width +10;
[Code].....
I have this following situation.Basically, I want my balls to move around a border and bounce off the walls when it hit the walls.
[code]...
I'm trying to make it so that when the ball hits the wall, it bounces off of it.. this is my code
Actionscript Code:
var elastic:MovieClip = _root.createEmptyMovieClip("elastic", 1);var point1:MovieClip = _root.attachMovie("sling", "point1", 3, {_x:50, _y:200});var point2:MovieClip =
[code].....
I have created a flash AS3 file with two movieclips. One is a ball (ball_mc) and a wall (wall_mc). The ball bounces around off the outer walls of the stage, in horizontal lines.
The ball also changes direction if it bounces off the wall. However its not bouncing off the wall in the right direction?
Code:
var dx:Number=3; //the amount the ball will move horizontally each frame
var dy:Number=5; //the amount the ball will move vertically each frame
this.addEventListener(Event.ENTER_FRAME,moveBall); // call the function moveBall every frame
[Code].....
below is the code I am useing I have created a simple frame with 2 layers one named body and one named Code in the code frame I have
[Code]...
In the body I have 4 walls all named top bottom right and left they are movies and they are named in there instance the same I have a circle I named ball and made it into a movie and named it ball yet when I run the flash file the ball flys off the page and doesnt bounce inside the boxes?
I have this code to make a ball bounce. it works fine, however, everything on the stage bounces. I only want the ball to bounce.
Here is my code
/* Actionscript 3.0 Bounce Effect. ball = movieclip instance name*/
var velocity = 0;
var gravity = 2;
var speed = 0.03;
var ground = 300;
Object(this).ball.addEventListener(Event.ENTER_FRAME, fl_bounce);
function fl_bounce(event:Event) {
[Code] .....
I'm pretty new to Flash and I've ran into a bit of an issue. I'm trying to convert a AS2.0 code into a AS3.0 code, more specifically I'm following this guide:
[Code]...
I'm making a ball that are going to bounce realistic..But it doesn't!
View 4 RepliesI have used this code for getting a circle going from the top and down...
Now i want it to bounce back to the top but i don�t know how to integrate it to the code.
onClipEvent(load){
myscale=290;
}
onClipEvent(enterFrame)
[Code]....
If anyone will explain how the code works(cause i�m no good at this Action Script),- i will be glad.
I'm making a game where the ball bounces off several walls to get to its destination: the portal. When the ball reaches a high speed it glitches through most of the walls.Here is my scene for the 3rd level of my game where the most glitches occur (attached file)In the picture there lists all the variables i put in the objects. You will also notice that I put a "Stuck" button since there were many glitches.[code]
View 2 RepliesJust getting it to spin off and react realisticly with the wall would add a whole new dimention, but its a bit beyond me (*noob!*). It calls for some collision recognition I think, but the forums I've read so far on the topic are just too complex. My aim is also to also bounce the ball off the cursor.
View 3 RepliesIn the process of making a pinball game, i wanted to set up a system where a ball would bounce on an object, and eventually come to rest on it. Everything works fine, but eventually the ball just goes through it instead of coming to rest on top of it. I do not understand why this happens, and would like to know if there is anything i can do to fix this. The .fla is attatched.
View 4 RepliesThe game is like any other pong game with one differance. Rather then the paddle only moving left and right, it would move in a circle around the play field and you would not be able to rely on the walls to keep your ball in play. My problem is that I cant get the ball to bounce off of the paddle at the correct angle. Below is a link of the swf and fla that I have now.[code]
View 7 RepliesI make this simple system to simulate a collision of a block in "walls" and bounce like a pong ball. To use drag the orange square and release to start the movement. But I have a problem, sometimes the collision not happen and the block go through the walls, I try less the time of setInterval that verify the collisions but not solve my problem.
collision system -> [URL]
I am making a pong game and am having some problems with the boundaries. The ball bounces off just fine but if i hit it to close to the boundary, the ball will get stuck in the wall and slowly travel upwards. Bouncing back and forth. It happens on both sides. Also How do you set a key press movement to stop. I want to be able to stop at the boundary if i hold the left key down but it would stop the game entirely. I have it set now so that the controls reverse every time a boundary is hit. My big problem is the boundary though. I will eventually figure out the paddle movement on my own. Another problem I am having is getting my score value to increment correctly. It always reads as a NaN until I score. When I do it goes 1, 11, 111, and so forth. I have the variable set as number values but the dynamic box, I think, is still reading them as strings
View 1 RepliesI have added full screen code on my movie so that the user can extend the size of the movie. eg If the user expands the browser window to 1200 X 900, then my movie will become 1200 X 900 without the movie deforming.
Code:
Stage.scaleMode = "noScale";
Stage.align = "TL";
[code]....
So in my level 1, here's what I wanted it to look like:on enter frame, a few of my "drag-gable" buttons are going to fall to the ground, bounce a little bit and stop when they ran out of speed.Attached the file that I've already scripted the drag n drop on each button, now how do i script the "fall to the ground part"?
View 0 Replies