How does one go about debugging unknown error messages?My core.00.log file has these entries in them.
2012-02-2409:21:412212(e)2611178Error from libf4f.dll: Total number of messages waiting to be recorded has exceeded the limit.-
2012-02-2409:21:412212(e)2611423Failed to record stream2 (Unknown Error).
I'm running the development edition of FMS 4.5 and am trying to get HLS working. Whenever I attempt to publish a stream from FMLE, I receive the message:
f4f:livestream - NetStream.Record.DiskQuotaExceeded
in the livepkgr application instance and Failed to record livestream (disk quota exceeded).in the server log.I realize there are limitations on the development edition (10 minutes of iOS streaming), however usually these limitations restart when the server is reset. I've restarted the application instance and the server itself, manually starting and stopping the service, and I still receive that error when I first connect and try to publish the stream right after a server restart. I've reset the server multiple times to no avail.
The recording settings in the application.xml are all set to the defaults (-1 for no maximums).Unfortunately I've never been able to get this to work yet so I'm not ambitious enough to start testing it on any production servers.
im using FMS4 as origin server and connect to FVSS from CDN, whose FVSS version's FMS3.5. with this all, when it's played with flashplayer from CDN every each connect require just wrote sth in the server log file as below:
Mon 09:51:56 AM: Assert failed in .TCMsgHandler.cpp line 70Mon 09:51:56 AM: Assert failed in .TCMsgHandler.cpp line 70Mon 09:51:56 AM: Assert failed in .TCMsgHandler.cpp line 70Mon 09:51:56 AM: Connect : rtmp://live.mywebsite.com:1935/2011/monitor/
and due to these frequent errors the CDN Edge service would get shuted down. but after i changed the FMS4 into FMS3.5 with origin server everything just worked well.Now my question is, is that a bug with FMS4 or? and what can be done so far if we want to go on use FMS4?
I've googled this and come up empty. All I am trying to do is create a netstream and assign a group to it like so:
var netstream;
var groupSpec;
groupSpec = new GroupSpecifier("foo");
trace("groupSpec: "+ groupSpec);
[Code]...
If I remove the groupSpec optional parameter I successfully connect the NetStream. According to the docs [on this page] I should be able to identify a GroupSpecifier in the NetStream constructor.
Is this a bug? Is there another way to do this?
I have a single server that runs IIS and FMS, both on port 80. The server has two internal IPs assigned to it, one for IIS and the other for FMS. I also have two static public IPs. My router maps one public IP to IIS' internal IP and likewise for FMS.
IIS works fine. Using an online port scanner, I was able to determine that port 80 is responsive for both public IPs. Before I had configured my Adapter.xml and fms.ini, only IIS' public IP was responsive. This seems to indicate that FMS is fine.
However, when my ActionScript creates a NetConnection and calls connect(), my netStatus callback takes about half a minute to be invoked, and I get "NetConnection.Connect.Failed". Which is not very informative. Is there a way to get more info about the cause of the error?
I've made an user login, working with php and MySQL. When the user logs in, he can see all of his details, loaded from a database. Here he can press a button to change this content. After changing it, he needs to press the "save" button to load the new data into the database. But everytime the user presses the save button, it's adding an extra line to the data into the database, which results in an error of displaying the data. Warning: Unknown: failed to open stream: No such file or directory in Unknown on line 0 Fatal error: Unknown: Failed opening required 'google_verify.php' (include_path='.:/usr/local/lib/php') in Unknown on line 0
View 1 RepliesI am trying to start making an admin client side application to monitor our service, including its properties that simply cannot be done through Administration Console, like blocking IP addresses of offending users.My problem is that even before I start using the Administration API (on which I will comment further down), I tried to f.e. inspect theshared objects and streams of the application through the Admin. Console, but I get a popup "Failed to make debug connection, please check that the application is in debug mode." Configuration files are unaltered from install, which means xPendingDebugConnections is set to 50, AllowDebugDefault is set to false, BUT in the serve side main.asc file I have "application.allowDebug = true;"Also, on a related note.
I can see that the Administration API lists the API itself, but there is vague to no mention at all where to connect first? I recall spotting somewhere suffixing the RTMP URL with something like "_fcs_debug" or something, but you can see how this frustrates me - I really don't like to google stuff that is supposed to be in the documentation The application instance usually accepts connections from regular non-admin clients, with proper parameters, which are irrelevant for admins unless these are users too (double membership, you can say)
I want to record a stream which is published with Flash Live Encoder to FMS 3.5, but split the recording in files with predefined length. For example if a stream 'webcam' is published I want to record it in chunks of 10 minutes: 'webcam1.flv', 'webcam2.flv' ... From what I can tell there's no facility to work with timers. The only solution I could think of was using stream.record() with a time limit parameter but that seems like a hack because it triggerstStream.Record.DiskQuotaExceeded on the stream when the recordin should stop and start recording another chunk. Has anyone done something similar?
View 10 RepliesI develop failover fms application with server-side action script. But i have a problem that FMS can't continue to record stream with record mode "append".
Environment: FMS 4.5.1 r484 on CentOS 5.5/6.0
Goals:
I have 2 same data streams in failover application and republish primary to livepkgr application.
I have to store of last 10 hours intact recorded video (DVR).
Failover app logic:
1. I create NetConnection and NetStream to livepackager;
2. When primary stream is connected it attach the primary stream to livePackager NetStream
3. If primary stream is disconnected it reattach the backup stream to livePackager NetStream
Problem: I have testing environment. It stop primary stream every 5 min, and started primary stream 5 min after stopping.
It work's, fine, but after a few hours testing LIVEPACKAGER falls. It can't record a stream, NetStream.Record.Start -> NetStream.Record.NoAccess -> NetStream.Record.Stop
Search a solution: I try to relaunch recording process and have no success. try to shutdown/start livepackager, it's same, try to restart server, same no success.
I cant stream.clear() or record with mode "record" cause it clears my dvr cache, I cant clean stream directory in livepackager application.
[Code]....
I have a Flex and Java application and i am using BlazeDS between flex and java. Generally my application works fine. I observed when ever i try fetch data little faster(not giving gap between two fetch commands) then i am getting the error "Server error :faultCode:Channel.Call.Failed faultString:'error' faultDetail:'NetConnection.Call.Failed: HTTP: Failed'"
I guess when ever load is increasing on BlazeDs, i am getting the error. I am calling the java service using following code
[Code]...
to generate thumbnails of the streaming video to control de contents of the video streaming. Could I do that in the server side?There is any setting to do that? Could I use the getOnMetadata method to catch a bitarray and then put in into a bitmap file?
View 1 RepliesI have configured FMS on Amazon EC2 I am trying to capture data from my webcam and push it to the server.For storing the webcam i created a new folder but as it is recommended in other forums "You need to replace the signed Live application (main.far) with main.asc in[FMS-Install-Dir]/samples/applications/live/ ;(For more Info: refer to documentations & live/readme.txt) "I am not able to locate samples folder from where i can get my main.asc file
View 4 RepliesLast week I started getting errors like these:
2011-03-21 02:09:38 10725 (e)2581279 Assert failed in /server/js/jsClient.cpp line 1172 -
2011-03-21 02:09:38 10725 (e)2581279 Assert failed in
[code].....
im looking for a script that can record audio from a mic and save it to a fms server i came across a video email script but would like to have just a audio one that can do the samething as the video email with out the video part.
View 2 Replies1. In FMS core logs I see this error "Failed to open log file[URL].. But I check and found the file exists. What can couse this error, do you have any idea? 2. Is there a way to disable logging for an application? 3. In edge logs, Sometimes I encounter the error "Exception while processing message : (Adaptor: _defaultRoot_, VHost: Unknown, App: , Type: 20, ID: 0, B". It seems it has no effect but still it is an error.
View 1 Repliesi m new for FMS I just wanna make a connection, I put swf file in FMS folder and here my codepackage{ import flash.net.NetConnection; import flash.display.Sprite; importflash.text.TextField; import flash.events.NetStatusEvent;public class main extends Sprite private var
View 3 RepliesI want to create dj mixer aplication (AS2). Something like this: ttp://activeden.net/item/dj-mixer/10276How I can record sound?
View 1 Repliesi have fms installed on a server, say server1. my flash files (swf) which allows user to record audio is on server 2. in the swf file, the connection is set as follows: nc.connect("rtmp://server1/test");
im able to view flash videos on server2 which streams from server1. however, i cannot upload any recording to the above directory. does the recording goes to the application or webroot folder? do i need to set any authentication to connect to server1(fms) from server2(swf)??
I am install FMS3.5 on linux,and it is fine,but adminserver is stop[code]...
so,why Failed to create listener for adaptor and create socket failed?
I developed an simple video player based on the osmf with a dynamic streaming.It works fine with the examples from Akamai, but if i take my Live-Streams the first stream loads but as soon as stream should switch to a higher bandwidth i get the error:ERROR : error ID=15 message=Playback failed detail=Failed to play (stream ID: 1).Has anyone an idea what i do wrong? Or what might be wrong with the videos or streaming?
View 2 RepliesI am getting "NetConnection.Connect.Failed" error when trying to connect to my FMS 3.5 server from Internet.Things work pretty well when the application is hosted and accessed on my local network. Now when I want to connect my live stream application to Internet it isn't working. Public IP for my server is of type xxx.xxx.xxx.xxx:xxxx (My machine is mapped to the ip so to connect I need to mention the port as well).I am running IIS and FMS on the same machine. I have changed the default tcp/ip port of iis to 8080 and the ports for FMS are set to 1935,80.I have updated the HTTPPROXY.HOST value in fms.ini to HTTPPROXY.HOST = :8080 (port of IIS)HTTP tunneling and HTTP Proxy are also enabled.
View 1 RepliesHow can we record audio in Flash Media server as MP3 format?
View 1 Repliesi know the way to capture the mic's sound,My idea is to make an application to record songs palyed by other app,like Windows Media Player,Yes, Just capture from the soundcard,
View 3 Repliesthis may be really dumb question, but I haven't figured it out. Is it possible to stream to ustream with lets say 300 bitrate and record 1000 bitrate video to computer
View 4 RepliesFMS can record computer sounds, I use flash to do a piano, it can play sound, I want record the sounds, FMS can record it?
View 4 RepliesAm trying to record video from my webcam.
here is my code
[code]...
When i click record_btn, flash asks me permission to access my webcam. If i alow in the screen i am able to see live video. But I want to store the video and replay it.
Flash Media Interactive Server 3.5 or later supports recording of streams using the H.264 codec, directly on the server. Archive high-quality live streams so you can quickly deploy the content on demand after your live event is over, and use the free F4V flattener utility to prepare your file for video editing using Adobe Premiere Pro CS5."
there is no problem to record the stream in flv format but i don't find a way to record using h.264 compression
I'm trying to record a video to the default FMS vod application with a flash movie, i'm getting this error: "NetStream.Record.NoAccess". I think the problem is not in my code, but just to make it sure, here is it:
var mycam:Camera = Camera.getCamera();
mycam.setMode(320,240,25);
var myvid:Video = new Video(mycam.width,mycam.height);
[code]...
i checked and the connection to the server is fine.if i use live streaming, than it's fine (of course in this case i use the live application).It's maybe a file system related problem. I use windows 7, and given all permissions for all the users.. still dont working.
'm writing an application using FMS in which I'm supposed to create a audio/video meeting between two or more people. I need to record this group session over FMS but unable to get an idea how to do it?
View 1 RepliesI create a local netconnection, and the netgroup on the server side. How can I record the stream that is published to a netgroup?
View 1 Replies