I tried to use NetGroup, but it seems that the peers can't see each other when they connect to my FMS4. I can only get NetGroup.Connect.Success but no NetGroup.Neighbor.Connect. The same code can work fine if connecting to Cirrus, so maybe it's not about my firewall or NAT problems.
I made two pages for testing. Each of them launchs two instances with same group name.
[Code]...
One server - is streaming server with Flash Media Interactive Server 3.5that host the application with asc files in FMS application directory.Second server - is the IIS web server that host thehtml,aspx,swf etc.. files.So basically i heve swf file on one server that have to connect to live streaming via rtmp on different server with different ip address.I did not find any clear explanation on this crossdomain rmtp issue.ys only HTTP can use crossdomain.xml policy filebut not rmtp.So what policy security procedure need to be done in order to enableswf file hosted on one server to connect and show rmtp live cam broadcasting from another server?
View 2 Replieshow to limited Media Encoder connect the media server?I have a adobe media server3 for liniux and hava a live IP. I can use the Media Encoder connenct the media server anywhere when I use the live IP. I want to know how to limited Media Encoder connect the media server.
View 1 RepliesI have installed the FMS 3.5 Server on a separate IP from our main Apache Server: The server is running Redhat Linux 2.6.18-128.1.10.el5
FMS 3.5 running on ***.***.**.138 using ports 1935, 8080 (Admin Server using port 1111)
Apache 2 running on ***.***.**.139 using port 80, 443. (several sites setup on this IP)
However, when accessing the fms_adminConsole.htm in the root directory of one of the domains on ***.***.**.139, all login attempts fail. I am connecting to localhost and using the assigned user and password set up in fms.ini. Using either IP fails as well. The FMS server is set up to listen to all hosts as no specific IPs were set.
/var/log/messages show that FMS and the Admin Server are up an running and listening:
Jul 7 12:15:37 228215-web1 Service[28196]: Server starting...
Jul 7 12:15:37 228215-web1 Service[28196]: Server started (/opt/adobe/fms/conf/Server.xml).
[Code]....
All other settings for FMS are default. This is my first time setting up FMS as a fresh install on a new unknown server and I am at a loss as to what settings to check or which files I may need to modify to get it to connect properly. It is a managed server is hosted by rackspace.com if that makes any difference.
How can i connect to my own server to watch my streaming video from another computer?
View 10 RepliesI am trying to set up DVR streaming using FLME. I'm following this tutorial: http:[url]........I'm up to Step 2,
I put in the following information into the FLME:
FMS URL: rtmp://222.222.222.222/dvrcast_origin
Stream: mp4:sample.f4v
Then click 'Connect' , but I get an error "Failure to connect to primary server verify that your server URL and application name are valid and that your internet connection is working and retry". My server is a 32-bit windows 2007 VPS , with FMS running.I don't know if I set up the DVR Cast application correct. All I did was copy the dvrcast_origin into the installationdirectory/applications, then I started a new instance of dvrcast_origin with _definst_...Also, I am running the trial version of FMS, and DVR needs FMIS. Is there a way I can just run FMIS?
I have installed FMS 4 on a remote host - Windows 2008. When I install it, I would prefer to install the Apache server and so I did. When I open the initial web page (file:///C: [url]...), the flash content loads and the panel says it is streaming from rtmp. Seems good. But when I try to conect to this from another Flash Media Live encoder, rtmp://ip address/live, where ip address is the address of my host, it won't connect (Failur to connect to pimary server).
When I try to connect to my server with a browser - http://ip address, it loads a web page but clearly it is loading from from IIS.So port 80 is being used by IIS even though I chose to install Apache. Web servers aren't a strong suit but I've found Apache usually fairly easy.Now, I had installed FMS on my notebook and I found I could connect without trouble to rtmp://localhost/live with Flash Media Live Encoder. I figured by installing it on the remote host and then replacing localhost with the ip address, I'd be ok.
I'm willing to use IIS if that is the best thing to do. Maybe that has nothing to do with it. Getting started with these things is usually the hardest part. I've used FMS in the past but haven't had to deal with installing it.
I am using osmf1.0 and am trying to connect to a server to do multibitratestreaming from a level3 FMS instance 3.5. The protocols osmf are rtmpe and rtmpte with 3 different ports 1935,443,80. All in all creating 6 different connections. It then goes and tries to connect to either of these connections asynchoneously (50ms separation between each attempt) which means a later attempt can succeed before an earlier one. The device I am using is an htc mobile running on android (user agent: Mozilla/5.0 (iPhone; U; CPU iPhone OS 3_0 like Mac OS X; en-us) AppleWebKit/528.18 (KHTML, like Gecko) Version/4.0 Mobile/7A341 Safari/528.16).The problem Typically, all attempts will fail (NetConnection.Connect.Failed) but occationally one does succeed but only over rtmpte but no specific port.In contrast, with Akamai it does work every single time.
View 4 Repliesi have install a delveopment origin server for FMS testing, it can success steam VOD through internal ip, then we move on to test external ip steaming, but if fail to connect through external ip address, our firewall is using NAT mapping for the ip address, we have enable port 80 & 1935, did we need to change to edge server? i have try to change the vhost setting, but once i change the setting, internal & external will fail to conenct it, i have modfiled these setting in default vhost.xml, did any thing i need to change it? <Mode>remote</Mode> <Anonymous>false</Anonymous> <LocalAddress>all</LocalAddress>
View 1 RepliesWe are running RedHat Enterprise Linux 5.5. I am told by the Adobe support department that only version 5.2 is supported. However, I have let them know this is basically impossible to do. You can't download 5.2 anymore and if you keep your system patched and updated you have to follow the 5.x branch.
We purchased brand new HP hardware for this server. It is a HP DL380-G6 Dual-Quad-Core Intel(R) Xeon(R) CPU E5540 @ 2.53GHz with 8GB of RAM. The fix at the moment is to restart the FMS system and everything clears itself up for some random amount of time. This this problems happens again.
[Code]...
I'm a server side newbie trying to set up FMS to stream VOD from a different drive on the same server (and ultimately via Cisco Show N Share) that I have all the media already on. FMS is installed on d:Flash Media Server 3.5 and all the media is already on the e:videolibrarySnSflv drivefolder.
[Code]...
I am trying to connect a simple application to FMS2. I get this error in the Server Log: Connection rejected by server. Reason : [ Server.Reject ] : Invalid uri : rtmp:/test. I have the test dir in the applications folder. This is what I give as a path rtmp:/test in the applications directory of the simple connect component. So what can be the problem?
View 1 RepliesOK... I had my host install FMS onto my server for me. I am a little lost on how to connect my .flv files to the FMS.
View 4 RepliesI'm trying to make an application that streams audio from an audio stream, but the NetStream seems to never connect. I don't have Flash Media Server.
View 3 RepliesI'm running a server where i stream 2-3 live tv channels and i'm posting it on my web page.few days ago i neticed that in FMS Console i have 6-7 LIVE INSTANCES and with many user connections. suppose someone get my server IP and use it to stream his matterials.How can i limit the ip's who can connect to the FMS?
View 2 Replieshow I connect with SQL or MySQL FMS3
View 1 RepliesI just had the Adobe Flash Media Server Demo version installed on our server, not my localhost. I'm also using Adobe Flash Media Live Encoder for the encoding. What I don't understand is what will the correct FMS URL be? I currently have Red5 installed and it's working just fine and I can understand what that URL is.... I'm just not sure what the URL would be for the FMS. I had the tech at the hosting company do the install
[Code]...
I have one PC and one laptop. Both of them are connected by wire to my linksys router and I can copy files between two systems without any problem. I have FMS running on my laptop and I have Flash Live Encoder 3.1 on my PC. I want to use Flash Live Encoder 3.1 to stream live webcam to FMS on my laptop via rtmp://[mylaptop-ip]/live. The ip address here is the address assigned to my laptop by my router. But I keep getting "Problem with Primary Server" error message.
View 3 RepliesI installed the Flash Media Server 4 and it works fine. However I uninstalled it from the control panel and reinstall it and it is no longer working now. The error i get in the server start screen is
"We are unable to connect to the network. We apologise for any inconvenience caused."
i have prepared a chat application using FMS. i need to save the chat history in the data base. i am not sure how to connect database and FMS.
View 2 RepliesI was try to connect my FMS 4 development server (Redhat linux OS) in live which was not connected, but the same setup in local windows is connected.I do know whats the exact problem. Also i will stop the iptables in linux but no use.
View 6 RepliesI've successfully installed Adobe FMS 4.5 and using FME 3.2 to stream. I can make the connection to live.stefanientertainment.com and see the demo page and run all the bitrate tests. When I go to Interactive mode and put in the Server address: rtmp:/live.stefanientertainment.com/live and the stream: cameraFeed, I get "Error: cannot connect to Flash Media Server! Error code:NetConnection.Connect.Rejected". Any ideas here. I've looked thru a ton of documentation and everything looks correct.
View 2 RepliesI am working on Cirrus I want to make audio chat. I publish stream on one side but its NetGroup.MulticastStream.PublishNotify event doesn't fires at first time....When I publish it twice or thrice it fires. I play the stream on the other side using published stream name but just after play event firing NetGroup.MulticastStream.UnpublishNotify fires and I can't listen the voice.
View 1 RepliesIs there any way to connect Java servlet to FMS?I would like to send comand from servlet via HTTP to FMS?(Something like communication to Flash media server using administration API)The best way for me would be connecting (writing) to SharedObjects, but I would be happy with any connection at all.(I read some about ColdFusion, but there would be too much modification on my servlet.)
View 4 RepliesIs it possible to install Flash Media Server 3.5 on the same Windows machine where Adobe Connect Pro is installed?If so, how to do it?When I try to do it, it says there is already an istance of FMS running and it asks for uninstalling it.Of course there is not any FMS installed. I want both on the machine.I suspect Adobe Connect uses an engine of FMS to work properly.
View 2 RepliesI found this example of a lobby in my flash media server book. But there's a little
var nc:NetConnection;
var rtmpNow:String;
var userName:String;
[code].....
I have been trying to get my live feed up and running for friends but they are unale to view it. I have FMS 4 with FMLE 3.2 on Win7. Under the fms url i have 'rtmp://localhost/live' and Stream name is 'livestream' I can view the stream just fine from my computer on which i am running both FMS and FMLE. but when i put the html file on my website, my friends just see the empty swfplayer. You can view it at[URL]. I was trying to figure out what the problem was so i copied the swf code 6 times with different settings but nothing worked. on my computer, only the first swf player works and im guessing that is because its localhost.
View 2 RepliesIm having trouble getting the FM Administrative Console to connect to my AWS FMS. I have an instance running and can view the default page and samples. I opened ports 1111 and 1935 and have also modified the fms.ini file to include a user name and password. Restarted the FMS as well.
View 1 Repliesi m new for FMS I just wanna make a connection, I put swf file in FMS folder and here my codepackage{ import flash.net.NetConnection; import flash.display.Sprite; importflash.text.TextField; import flash.events.NetStatusEvent;public class main extends Sprite private var
View 3 RepliesIs there some FMS-specific reason why a sendAndLoad function in SSAS couldn't connect to a site on an IP address? Are there any configurations that would need to be set to allow/deny this type of connection? We have a server instance that can only connect to sites hosted on fully qualified domains.
View 1 Replies
