Is it possible to install Flash Media Server 3.5 on the same Windows machine where Adobe Connect Pro is installed?If so, how to do it?When I try to do it, it says there is already an istance of FMS running and it asks for uninstalling it.Of course there is not any FMS installed. I want both on the machine.I suspect Adobe Connect uses an engine of FMS to work properly.
View 2 RepliesI am creating conference application in flash cs4. I need to record meeting like adobe connect. How they record meeting?
View 5 RepliesI am recording video using Flash and Red5 server and am doing it well,But when Red5 server is installed in another machine am not able to access it from my machine through LAN.am using another machine IPAddress to connect. Example:"rtmp://xxx.xxx.xxx.xxx/echo" When i access in my local machine using "rtmp://localhost/echo" it works fine.
View 1 RepliesI instal on a machine the Adobe Flash Server 3.5.I have the Flash media administration console but i do not know how i can configure the machine to be a flash media streaming server.I have a tv card on my machine and i want use de flash media encoder to stream to a web page the tv signal on my tv card.I think i need to send the signal encoded use the flash media encoder to a flash media streaming server correct?
View 1 RepliesI seem to recall reading somewhere (but for the life of me I can't find the article I was reading), that with Adobe FMS you could store content on one machine, and then run the actual server on a separate machine. Is this correct? If so, how would you go about doing it?
View 1 RepliesI want to to instal FMS and Wowza Server on same machine any one know about this
View 3 RepliesI have been running a test server using Apache as the web server. The problem is I need to be able to run FMS on an IIS machine, and there is a conflict over each trying to binding to port 80. I have read that a solution to this problem is to have 2 IP addresses, having FMS bind to one and IIS bind to the other. This is not a requirement for Apache and FMS. Why is it a requirement for IIS and FMS? This question my show my lack of knowledge of the difference between the 2. But, is it possible to configure IIS or FMS so that they share port 80 like FMS and Apache do? how Apache and FMS work together, and why IIS cant?
View 2 RepliesOne server - is streaming server with Flash Media Interactive Server 3.5that host the application with asc files in FMS application directory.Second server - is the IIS web server that host thehtml,aspx,swf etc.. files.So basically i heve swf file on one server that have to connect to live streaming via rtmp on different server with different ip address.I did not find any clear explanation on this crossdomain rmtp issue.ys only HTTP can use crossdomain.xml policy filebut not rmtp.So what policy security procedure need to be done in order to enableswf file hosted on one server to connect and show rmtp live cam broadcasting from another server?
View 2 RepliesCan Adobe Flash Media Streaming Server 3.5 run on AMD Athlon Dual Sock Quad Core?I just requested a Dell server to be added to our farm to run as a Media Server and to my surprise, while reading the requirements for FMS it states the following: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended)
View 2 RepliesHas anybody experience to install FMS 3.+ Apache on the same machine with IIS7. Our business department decided to save some money on hardware and we have to install FMS on production, where we have already hostted ASP.NET WebSite. We have to do steaming video on our ASP.NET pages. I think to configure FMS on ports 1925,6000 instead of 1925,80. Will it be ok for Apache? Actually, I tested the installation with this configuration on our testing enviroment and it works, but the funny thing is that I can put rtmp://111.111.111.111/vod/sample.flv works (without port 6000). Is it correct behavior?
View 3 Replies1.How do I connect to the Admin Console through a static ip remotely as I will not have access to the machine locally?
2.I want to stream live audio and do audio on demand, how do I do this?3.How to I embed a music player in a webpage that can stream live audio or the audio on demand?
Apply the security patch found here:http:[url]............For more information see the followingresource:CVE: 2009-1365
View 1 RepliesWe are deploying a media management system within a local network. FMS will be used to serve the media within the local network. Since we will only have max 100 users and we have a powerful dual 4 core xeon and the plan was to install IIS and FMS on the same machine. But now I read that there will be a conflict because the embedded Apache server that FMS installs will fight for port 80 with IIS.
So one possible solution: I've been reading in the Adobe docs that RTMP is far more efficient than tunneling through HTTP, so if we make sure all client machines allow RTMP (firewall exception) can we then change the configured Apache port and assume that Apache will never ever be used?
Heck in this case can we configure FMS and choose not to install Apache at all and be OK?
I am working on streaming programs through "Adobe flash Media Live encoder" in my website.The steps that i done for streaming is
* Installed Adobe flash media live encoder
* In the FMS URL entered as " rtmp://myserver ip/live "
* In stream given as "livestream"
* when i click connect the follwing error is displaying " Invalid primary FMSURL "
The website i am going to implement is [url]... which is done using PHP. Is there anything i have to do in coding to connect the media server.
how to limited Media Encoder connect the media server?I have a adobe media server3 for liniux and hava a live IP. I can use the Media Encoder connenct the media server anywhere when I use the live IP. I want to know how to limited Media Encoder connect the media server.
View 1 RepliesI have installed the FMS 3.5 Server on a separate IP from our main Apache Server: The server is running Redhat Linux 2.6.18-128.1.10.el5
FMS 3.5 running on ***.***.**.138 using ports 1935, 8080 (Admin Server using port 1111)
Apache 2 running on ***.***.**.139 using port 80, 443. (several sites setup on this IP)
However, when accessing the fms_adminConsole.htm in the root directory of one of the domains on ***.***.**.139, all login attempts fail. I am connecting to localhost and using the assigned user and password set up in fms.ini. Using either IP fails as well. The FMS server is set up to listen to all hosts as no specific IPs were set.
/var/log/messages show that FMS and the Admin Server are up an running and listening:
Jul 7 12:15:37 228215-web1 Service[28196]: Server starting...
Jul 7 12:15:37 228215-web1 Service[28196]: Server started (/opt/adobe/fms/conf/Server.xml).
[Code]....
All other settings for FMS are default. This is my first time setting up FMS as a fresh install on a new unknown server and I am at a loss as to what settings to check or which files I may need to modify to get it to connect properly. It is a managed server is hosted by rackspace.com if that makes any difference.
How can i connect to my own server to watch my streaming video from another computer?
View 10 RepliesI am trying to set up DVR streaming using FLME. I'm following this tutorial: http:[url]........I'm up to Step 2,
I put in the following information into the FLME:
FMS URL: rtmp://222.222.222.222/dvrcast_origin
Stream: mp4:sample.f4v
Then click 'Connect' , but I get an error "Failure to connect to primary server verify that your server URL and application name are valid and that your internet connection is working and retry". My server is a 32-bit windows 2007 VPS , with FMS running.I don't know if I set up the DVR Cast application correct. All I did was copy the dvrcast_origin into the installationdirectory/applications, then I started a new instance of dvrcast_origin with _definst_...Also, I am running the trial version of FMS, and DVR needs FMIS. Is there a way I can just run FMIS?
I have installed FMS 4 on a remote host - Windows 2008. When I install it, I would prefer to install the Apache server and so I did. When I open the initial web page (file:///C: [url]...), the flash content loads and the panel says it is streaming from rtmp. Seems good. But when I try to conect to this from another Flash Media Live encoder, rtmp://ip address/live, where ip address is the address of my host, it won't connect (Failur to connect to pimary server).
When I try to connect to my server with a browser - http://ip address, it loads a web page but clearly it is loading from from IIS.So port 80 is being used by IIS even though I chose to install Apache. Web servers aren't a strong suit but I've found Apache usually fairly easy.Now, I had installed FMS on my notebook and I found I could connect without trouble to rtmp://localhost/live with Flash Media Live Encoder. I figured by installing it on the remote host and then replacing localhost with the ip address, I'd be ok.
I'm willing to use IIS if that is the best thing to do. Maybe that has nothing to do with it. Getting started with these things is usually the hardest part. I've used FMS in the past but haven't had to deal with installing it.
I am using osmf1.0 and am trying to connect to a server to do multibitratestreaming from a level3 FMS instance 3.5. The protocols osmf are rtmpe and rtmpte with 3 different ports 1935,443,80. All in all creating 6 different connections. It then goes and tries to connect to either of these connections asynchoneously (50ms separation between each attempt) which means a later attempt can succeed before an earlier one. The device I am using is an htc mobile running on android (user agent: Mozilla/5.0 (iPhone; U; CPU iPhone OS 3_0 like Mac OS X; en-us) AppleWebKit/528.18 (KHTML, like Gecko) Version/4.0 Mobile/7A341 Safari/528.16).The problem Typically, all attempts will fail (NetConnection.Connect.Failed) but occationally one does succeed but only over rtmpte but no specific port.In contrast, with Akamai it does work every single time.
View 4 RepliesI just set up a new copy of the official Adobe Amazon Machine Image for FMS4.One show stopper: it seems to require a license key in fms.ini, just like any other FMS4 install.The master log file has "invalid license key" in it. We tried giving it the "Activation key" no dice.There's a license directory in /opt/adobe/fms with 3 .bin files.We tried entering the path to that directory for the license no dice.The docs don't say anything about it.I've spent over 3 hours being transferred around Adobe and listening to elevator music(code).........
I have install the Flash Media Server and Flash Media Live Encoder. Everything run perfectly when I test the Live Stream through localhost, but if I try to embed to another machine, it is failed.
View 1 Repliesi have install a delveopment origin server for FMS testing, it can success steam VOD through internal ip, then we move on to test external ip steaming, but if fail to connect through external ip address, our firewall is using NAT mapping for the ip address, we have enable port 80 & 1935, did we need to change to edge server? i have try to change the vhost setting, but once i change the setting, internal & external will fail to conenct it, i have modfiled these setting in default vhost.xml, did any thing i need to change it? <Mode>remote</Mode> <Anonymous>false</Anonymous> <LocalAddress>all</LocalAddress>
View 1 RepliesWe are running RedHat Enterprise Linux 5.5. I am told by the Adobe support department that only version 5.2 is supported. However, I have let them know this is basically impossible to do. You can't download 5.2 anymore and if you keep your system patched and updated you have to follow the 5.x branch.
We purchased brand new HP hardware for this server. It is a HP DL380-G6 Dual-Quad-Core Intel(R) Xeon(R) CPU E5540 @ 2.53GHz with 8GB of RAM. The fix at the moment is to restart the FMS system and everything clears itself up for some random amount of time. This this problems happens again.
[Code]...
I would like to ask if Adobe Flash Media Streaming Server (not Interactive) supports the following Stream.play (server-side streaming), but not necessarily server-side playlists which I know is a FMIS featureunsigned server-side asctionscripts (main.asc) The difference is in the price of course, one is $1000, the other is $5000, so if the two above are supported, I will buy FMSS
View 1 RepliesI evaluated the Flash Media Server 3.5 by running samples for .flv,f4v,.mpg,.avi video formats and the product looks excellent to work as a Video Streaming Server - Live Video, Recorded Video Viewing by Audiences.
Query : ELearning Course modules are designed and developed using Macromedia Flash and Action Scripting Language.The Output Formats of the LMS are .swf files.As Elearning courses - LMS offer/involves User Interaction (Viewing courses by Students, Giving Exams for obtaining certification etc).Can we also use the Flash Media Server 3.5 for integrating with LMS Site running in IIS 6.0/7.0 ?
Client : IE 6.0/7.0, Macromedia Flash Player 10.0.
I'm a server side newbie trying to set up FMS to stream VOD from a different drive on the same server (and ultimately via Cisco Show N Share) that I have all the media already on. FMS is installed on d:Flash Media Server 3.5 and all the media is already on the e:videolibrarySnSflv drivefolder.
[Code]...
I am trying to connect a simple application to FMS2. I get this error in the Server Log: Connection rejected by server. Reason : [ Server.Reject ] : Invalid uri : rtmp:/test. I have the test dir in the applications folder. This is what I give as a path rtmp:/test in the applications directory of the simple connect component. So what can be the problem?
View 1 RepliesI have installed Adobe Flash Media Server in Ubuntu. When I run the command sudo ./fmsmgr server start it says that Server: start command: Server service start not found. Exiting When I start adminserver in the same way, the message displayed is : Starting Adobe Flash Media Admin Server(check /var/log/messages) In the messages, the following is displayed:
[Code]...
OK... I had my host install FMS onto my server for me. I am a little lost on how to connect my .flv files to the FMS.
View 4 Replies