Media Server :: RTMPS In Chrome And Firefox / Linux
Apr 25, 2011
I've been working with the Beginning AS3 Tutorial which streams a video from Flash Media Server. I've been trying to enable RTMPS for this demo and it works correctly in Firefox and IE on Windows (usingTLS == true) but does not work (usingTLS == false) in Firefox on Linux and Chrome on Windows. Why Flash does not currently support either of these browsers? I've verified against Openssl using s_client connect that the certificate chain was properly installed from the website's wildcard certificate -> intermediate certificate -> root certificate. Why doesn't it work in all browsers on all platforms?
View 1 Replies
Similar Posts:
Nov 1, 2010
Need to know to be compliant to the Payment Cards Industry security standard.
View 1 Replies
Sep 16, 2010
I have configured FMS 4.0 to do RTMPS on port 443. To test it, I created a self-signed certificate and then imported the certificate as an authority in my browser (Firefox). I don't want to go and get a real certificate until I can verify that FMS is able to do what I want it to.I included the path to the certificate and the private key in Adaptor.xml in <install dir>/conf/_defaultRoot_/That's the only file I have modified.[code]In the NET_STATUS handler I always get the following error: NetConnection.Connect.CertificateUntrustedSigner.
View 1 Replies
May 20, 2011
I've been trying to figure out FMS for about a week now. Because of company firewalls, all traffic must go through either port 80 or 443 (I configured this in FMS.ini). I also created a self-signed SSL certificate and configured the adaptor.xml file to use it. Nevertheless, here are the problems I am experiencing: For RTMPT & RTMPTE, I can't start more than 9 connections. Beforing configuring FMS to also use port 443, I could only get about 4 connections. Now I would like to say that I testing this between only two computers, the FMS server with apache web server and a client.why it will not at least start 10 connections which I know is the limit for the dev version? Also, when using RTMPS I can only start 1 connection. Why is that?
View 4 Replies
Dec 8, 2009
it doesn't matter which operating system we install an our server.What are your experience with Linux and Windows?Which System do you recommend regarding performance issues?
View 1 Replies
Dec 6, 2011
We purchased Flash Media Streaming Server Interactive edition in order to have the security featuers of not allowing unauthorized connections streaming live content to the server. Is there a document with procedures that details how to make this happen, the allowedHTMLdomains.txt does not work when you place in IP ranges that you do not want connecting. I need some help just to figure out a way to keep someoen from connecting to the server and not streaming live content. Has anyone configured this in Linux because the documentation is mainly for Windows. Any help/advice would be great since this seems to be a common problem for anyone who runs Linux.
View 10 Replies
Jun 8, 2010
I can't find free version FCS distrib for Linux
View 3 Replies
Jan 19, 2011
Is it possible to have multiple FMS installation running on 1 linux server?This mean that each fmsadmin, fmsmaster, fmsedge, fmscore will run under a specific user. (not vhosts of a single FMS install)How will this impact the performance of the other FMS instances in case there are more of them running on the same server?
View 2 Replies
Dec 9, 2010
I have apache web server installed on linux with one ip and some virtual hosts. Can I install fms on this server?
View 1 Replies
May 14, 2009
there's the Adobe requirement Linux® Red Hat® 4 or 5.2 supported OS for FMS 3.5. I would like to know, is FMS 3.5 compitable with Linux® Red Hat® 5.3 ?
View 1 Replies
Sep 24, 2011
Adobe I can find instructions and a list of needed for modifying Apache to work with HLS for Apple/IOS devices. However I cannot use .dll on Linux but I can possibly use the .so files .... so can you verify that FMS 4.5 HLS for Apple/IOS devices works on Linux by installing just the 3 .so files below? If it is in short why don't i need the .dll? I don't spend days trying to install FMS 4.5 in a way that is not documented or tested by you. Also is installing FMS 4.5 and HLS for Adobe/IOS devices possible on IIS? Where do i get instructions for IIS?
[Code]...
View 12 Replies
Jan 22, 2008
I installed FMS into a linux server with its own flash media encoder uthentication add-in. I restarted the fms service. The fms is working fine, i can stream and also visualize the stream on a client. When I connect to fms with fme i'm not asked for username and password. How do I set up users in fms so that the access to it should be restricted?
View 6 Replies
Dec 11, 2010
I like to know what is the best Linux distribution for professional use of FMS (streaming events on the web, HD, 50 to 100 viewers). Debian Lenny/Squeeze, CentOS, RedHat?
View 5 Replies
Dec 16, 2011
1. I've installed FMS on OpenSuse 11.4 64 bit, I know that according to the requirements it is not recommended distribution, but common opensuse is very modern and complete.
2. During the installation I had to make a link @libcap.so.1 into the directory where installFMS script was present (because installer says that there is no libcap library which is not true)
3. Completed the installation without installing apache (I have apache on this machine but disabled -> free 80 port)
4. I have left default configuration (regarding user, group, ports: 80 & 1935 + 1111, added the admin user)
5. I started the server with the command ./server start
6. My htop shows: - several processes ./fmsadmin -console -conf ./conf/Server.xml
7. I can connect to the server using the administration console on my localhost. The server is installed on host 192.168.0.160 (local network), I can connect to the server using credentials given earlier
8. I can not connect to the rtmp service or rtmpt service
I am using:
rtmp://192.168.0.160/vod/
or
rtmp://192.168.0.160/vod/sample1_500kbps.f4v
or
rtmp://192.168.0.160:1935/vod/
[code].....
View 1 Replies
Mar 18, 2012
[URL]
My webcam works great with Skype and Cheese and it used to work great with a program called FaceFlow but now when i try to use it with FaceFlow i get the following pop-up: Adobe Flash Player can't locate a camera on my computer? I have installed via Synaptic the latest version of Adobe Flash Player which is 11,1,102,63 but without any affect?
Would it be possible to uninstall the present version of Adobe and use an older version in the hope that the webcam will be recognised?"
I did a quick test of FaceFlow the other day ...... I have two webcams for testing, one is an older model and the other a uvc compatible device.
Faceflow would not recognise the older model, only the uvc camera.
Seems you have come across the same problem "
View 1 Replies
Jun 11, 2009
If I publish using an Adobe Flash Media Encoder 2.5 or a normal client a netstream with codec NellyMoser at 8Khz, the audio stream is incomprehensible for a MAC OS or a Linux Adobe Player.Steps to reproduce:
1. Create a new Actionscript Project in Flex Builder, for example: AdobeBug.
2. Start a Flash Media Server 3.5 in localhost(rtmp://localhost/live).
3. Insert the following code in the Default Application file: AdobeBug.[code]
4. Compile and play the file. 5. Run the Adobe Flash Media Administration Console and play the stream named livestream using a Linux or a Mac OS system, but not a Windows system. This stream should be a Nellymoser audio at 8KHz.
Playback starts, but audio is unintelligible in Linux and Mac OS Adobe Flash player.Doesn't happen if I listen the stream using a Adobe Flash Player plugin or a Flash Media Administration Console for Windows systems.
View 2 Replies
Nov 18, 2009
I'm attempting to install and run FMS on a Red Hat Enterprise Linux system. At one point, it did function properly, but now it will not stream video at all, and I keep getting a constant stream of errors. No changes were made to the FMS configuration to make it stop working. Attempting to load it in console mode results in the following:
-bash-3.2$ ./fmsmaster -consoleAdobe Flash Media Server (Master)Console mode.FMS detected IPv6 protocol stack!FMS config <NetworkingIPv6 enable=false>FMS running in IPv4 protocol stack mode!Host: uberserver IPv4: 127.0.0.1Server starting...Edge (13199) started, arguments : -edgeports ":1935,80" -coreports "localhost:19350" -conf "/opt/adobe/fms/conf/Server.xml" -adaptor "_defaultRoot_" -name
[code]....
The assert errors continue until I terminate the process.
View 6 Replies
Nov 27, 2010
I've already enabled the FMIS: Please enter your Flash Media Server 3.5.1 serial number.xxxxxx Congratulations. You have enabled theAdobe Flash Media Interactive Server! But my own application still fails :
[Code]....
View 7 Replies
Sep 9, 2011
We have several systems, inside and outside (development, test and production), that we need to upgrade FMS on Over time, I have found the process utterly cumbersome, prone to errors and time consuming... and outright annoying therefore.The permissions are never consistent, usually insecure (tmp and other directories world writable), and so onI wonder if anyone here has come up with a nifty way to work around this. For example, our setup is pretty uniform, so it's really unnecessary to do an interactive install all the time -- I could of course strip down the installFMS script, but I don't want to conflict with future changes
View 3 Replies
Nov 9, 2011
I deployed FMS 4.0 enterprise edition on my 64-bit linux platform. in the applications folder of FMS, i create a "dvr" subfolder and at the same time create a dvr.asc. the code is as the following :
application.onAppStart = function()
{
trace("app fme started!");
};
[Code]....
i expect the live stream will be recorded on the FMS server , but unfortunately nothing happened . But if i use my pc ( 32-bit windows xp platform) , everything works well. when i connect to my win_xp pc, the fms server automatically created a streams\_definst_myVideo.flv file under the dvr folder.
then the fms server on 64-bit linux cannot create the myVideo.flv file ?
View 3 Replies
Mar 27, 2011
This is pretty straight in windows. But how to do the 2 steps in linux?
View 5 Replies
Jul 6, 2009
I have failed in generating core.I have added a line "ulimit -c unlimited" in server's start function. I killed the fmsedge process by "killall -6 fmsedge". The process do be killed but no core. file is seen in /opt/adobe/fms finally.
View 1 Replies
Jan 17, 2010
For the past while, my developer has been working with me on a small project to put together a live interactive whiteboard app, powered by Flash Media Interactive Server. Well, everything is finished & ready to go, but there seems to be a big problem:
The app was developed & tested on a windows machine, while my server and all my website files (to integrate with) is on a Linux system.
It's been a month since this problem arrose, and there had not been any further progress with this project for the time. My developer doesn't seem to know much about how the 'conversion process' works, if there is one.
Do you know if this is possible (to convert a windows-programmed app to work on a linux system)? If so, do you know roughly how it should be handled?
View 2 Replies
Aug 22, 2010
The problem I have is that on linux, the flv files generated by fms are having permission 660. Due to this they become kind of useless as I cant do much with them. Is there a way to make fms generate streams with better default permission?
View 1 Replies
Jan 3, 2012
I'm running FMS 4.5 on a Linux system with 4GB of RAM.Whenever I do a live broadcast from the server, the audio does a very strange thing. It sounds, ever so slightly, like an old record player where someone is occasionally (4-5 times a minute) putting a small amount of pressure on the speed of the record player and altering the pitch of the music. All my buffer settings are the default settings. It happens whether I'm doing CD quality audio or dialup 11025 kbps audio. I'm using MP3 for an audio format.
View 2 Replies
Apr 19, 2009
I'm stumped on how to get started with Adobe Flash Media Server. On Linux. All I need to do is:
[Code]...
View 2 Replies
Mar 1, 2012
I have a Flash Media Streaming Server 4.0 running for more than a year now. I protect the access to my server through the "allowedHTMLdomains.txt and allowedSWFdomains.txt feature" (amongst other things...). We noticed that with Firefox 10.0.2 (last version) and Flash Player 11.1.102.62 (last version) our customers can't connect anymore. In the admin console we can read things like: Authentication failed for pageurl: [URL]
[Code]...
View 4 Replies
May 5, 2009
I'm developing an applications which I've got running on a server on my linux desktop. Due to the shortcomings of Flash on Linux (read: too hard) I'm developing the (small) flash portion of the app in Windows, which means there's a lot of frustrating back and forth. Now I'm trying to capture the output of the flash portion using flash tracer and that is proving very difficult also. Is there any other way I could monitor the output of trace on linux?
View 6 Replies
Nov 18, 2010
Today I cannot get on the forums through FireFox or through Chrome - they work ok in both IE and Safari, but are a mess in FF and Chrome - on two different machines for me. Anyone else seeing this? Chatted with Adobe's support for a few minutes and realized they have no damn clue about anything...
View 4 Replies
Mar 28, 2012
This is working fine in IE but not working in firefox & Chrome browsers
var pageURL:String = ExternalInterface.call("window.location.href.toString");
if(pageURL == null)
{
[Code]....
View 3 Replies
