Media Server :: Install And Run FMS On A Red Hat Enterprise Linux System?
Nov 18, 2009
I'm attempting to install and run FMS on a Red Hat Enterprise Linux system. At one point, it did function properly, but now it will not stream video at all, and I keep getting a constant stream of errors. No changes were made to the FMS configuration to make it stop working. Attempting to load it in console mode results in the following:
-bash-3.2$ ./fmsmaster -consoleAdobe Flash Media Server (Master)Console mode.FMS detected IPv6 protocol stack!FMS config <NetworkingIPv6 enable=false>FMS running in IPv4 protocol stack mode!Host: uberserver IPv4: 127.0.0.1Server starting...Edge (13199) started, arguments : -edgeports ":1935,80" -coreports "localhost:19350" -conf "/opt/adobe/fms/conf/Server.xml" -adaptor "_defaultRoot_" -name
[code]....
The assert errors continue until I terminate the process.
View 6 Replies
Similar Posts:
Aug 5, 2009
Might be a dumb question but a client has Windows 2003 Enterprise SP2 R2 and I was wondering if Flash Media Interactive Server will install and run fine on it? The requirements on the site say Microsoft® Windows Server® 2003 with Service Pack 2 but no about "Standard" or "Enterprise".
View 5 Replies
Dec 9, 2010
I have apache web server installed on linux with one ip and some virtual hosts. Can I install fms on this server?
View 1 Replies
Dec 8, 2009
it doesn't matter which operating system we install an our server.What are your experience with Linux and Windows?Which System do you recommend regarding performance issues?
View 1 Replies
Jan 17, 2010
For the past while, my developer has been working with me on a small project to put together a live interactive whiteboard app, powered by Flash Media Interactive Server. Well, everything is finished & ready to go, but there seems to be a big problem:
The app was developed & tested on a windows machine, while my server and all my website files (to integrate with) is on a Linux system.
It's been a month since this problem arrose, and there had not been any further progress with this project for the time. My developer doesn't seem to know much about how the 'conversion process' works, if there is one.
Do you know if this is possible (to convert a windows-programmed app to work on a linux system)? If so, do you know roughly how it should be handled?
View 2 Replies
Jan 3, 2012
I'm running FMS 4.5 on a Linux system with 4GB of RAM.Whenever I do a live broadcast from the server, the audio does a very strange thing. It sounds, ever so slightly, like an old record player where someone is occasionally (4-5 times a minute) putting a small amount of pressure on the speed of the record player and altering the pitch of the music. All my buffer settings are the default settings. It happens whether I'm doing CD quality audio or dialup 11025 kbps audio. I'm using MP3 for an audio format.
View 2 Replies
Sep 14, 2010
What is the price of Flash Media Enterprise Server? The application level multicast is only available with this edition.
On this web site, there's no more information about this.
View 1 Replies
Nov 17, 2010
How do i lock it to my website only so no otherwebsites can use my server?
View 6 Replies
Dec 4, 2010
G'day chaps, me and my mates have purchased a copy of Flash Media Server 4 Enterprise edition for use on our web project. Since we will be transmitting to large amounts of users through this exceptional piece of software, we will be needing to run more than one server at once. Before going ahead and doing anything against the policies we have decided to post here on the support forums and inquire about being able to run multiple copies of Flash Media Server 4 Enterprise edition with one Serial KEY ( 10 x GigE dedicated servers ). If this is not possible, how can me and my chappies load balance all the traffic through one Flash Media Server 4 Enterprise edition.
View 3 Replies
Oct 2, 2011
so i was getting people embedding my player to there site and stealing my thunder.. so i changed allow all to my domain and well i cant connected with fme
View 29 Replies
Dec 6, 2011
We purchased Flash Media Streaming Server Interactive edition in order to have the security featuers of not allowing unauthorized connections streaming live content to the server. Is there a document with procedures that details how to make this happen, the allowedHTMLdomains.txt does not work when you place in IP ranges that you do not want connecting. I need some help just to figure out a way to keep someoen from connecting to the server and not streaming live content. Has anyone configured this in Linux because the documentation is mainly for Windows. Any help/advice would be great since this seems to be a common problem for anyone who runs Linux.
View 10 Replies
Jun 8, 2010
I can't find free version FCS distrib for Linux
View 3 Replies
Jan 19, 2011
Is it possible to have multiple FMS installation running on 1 linux server?This mean that each fmsadmin, fmsmaster, fmsedge, fmscore will run under a specific user. (not vhosts of a single FMS install)How will this impact the performance of the other FMS instances in case there are more of them running on the same server?
View 2 Replies
May 14, 2009
there's the Adobe requirement Linux® Red Hat® 4 or 5.2 supported OS for FMS 3.5. I would like to know, is FMS 3.5 compitable with Linux® Red Hat® 5.3 ?
View 1 Replies
Sep 24, 2011
Adobe I can find instructions and a list of needed for modifying Apache to work with HLS for Apple/IOS devices. However I cannot use .dll on Linux but I can possibly use the .so files .... so can you verify that FMS 4.5 HLS for Apple/IOS devices works on Linux by installing just the 3 .so files below? If it is in short why don't i need the .dll? I don't spend days trying to install FMS 4.5 in a way that is not documented or tested by you. Also is installing FMS 4.5 and HLS for Adobe/IOS devices possible on IIS? Where do i get instructions for IIS?
[Code]...
View 12 Replies
Oct 17, 2011
I'm doing a test install before we update our old server to 4.03.I've got the server software installed and configured (4.03 server, using iis for web).All the test stuff on the sample index page works, except for the dynamic stream tab.I've eyeballed the .f4m file, and tried putting in a complete url to the samples...but no luck.i just keep getting the stock connection timed out message.
Where do i need to look to start confiriming where this issue may be coming from?I've made made sure I can reach all the test videos by making flash players for them, calling them via rtmp... no problems.It's got to be something dumb with either the f4m file, or the way it's being served (btw, i have added all the mime types to iis , including .f4m as video/mp4....which is one of two ways I've seen it added).
View 3 Replies
Sep 18, 2010
i have FMS Installed And after its installed i also Install The Addon Auth to make a username and password so no one else can just start a Stream but after i install it and restart the server it wont work any the fms does work but the addon doesn't.
View 1 Replies
Oct 28, 2010
I created a video live recorder and its working fine locally. Now I want to add the video recorder to my website. What is the steps to add this in my website? Whether I need to buy and install FMS in my server?
View 4 Replies
Jan 22, 2008
I installed FMS into a linux server with its own flash media encoder uthentication add-in. I restarted the fms service. The fms is working fine, i can stream and also visualize the stream on a client. When I connect to fms with fme i'm not asked for username and password. How do I set up users in fms so that the access to it should be restricted?
View 6 Replies
Dec 11, 2010
I like to know what is the best Linux distribution for professional use of FMS (streaming events on the web, HD, 50 to 100 viewers). Debian Lenny/Squeeze, CentOS, RedHat?
View 5 Replies
Dec 16, 2011
1. I've installed FMS on OpenSuse 11.4 64 bit, I know that according to the requirements it is not recommended distribution, but common opensuse is very modern and complete.
2. During the installation I had to make a link @libcap.so.1 into the directory where installFMS script was present (because installer says that there is no libcap library which is not true)
3. Completed the installation without installing apache (I have apache on this machine but disabled -> free 80 port)
4. I have left default configuration (regarding user, group, ports: 80 & 1935 + 1111, added the admin user)
5. I started the server with the command ./server start
6. My htop shows: - several processes ./fmsadmin -console -conf ./conf/Server.xml
7. I can connect to the server using the administration console on my localhost. The server is installed on host 192.168.0.160 (local network), I can connect to the server using credentials given earlier
8. I can not connect to the rtmp service or rtmpt service
I am using:
rtmp://192.168.0.160/vod/
or
rtmp://192.168.0.160/vod/sample1_500kbps.f4v
or
rtmp://192.168.0.160:1935/vod/
[code].....
View 1 Replies
Mar 18, 2012
[URL]
My webcam works great with Skype and Cheese and it used to work great with a program called FaceFlow but now when i try to use it with FaceFlow i get the following pop-up: Adobe Flash Player can't locate a camera on my computer? I have installed via Synaptic the latest version of Adobe Flash Player which is 11,1,102,63 but without any affect?
Would it be possible to uninstall the present version of Adobe and use an older version in the hope that the webcam will be recognised?"
I did a quick test of FaceFlow the other day ...... I have two webcams for testing, one is an older model and the other a uvc compatible device.
Faceflow would not recognise the older model, only the uvc camera.
Seems you have come across the same problem "
View 1 Replies
Jul 31, 2010
I want to to instal FMS and Wowza Server on same machine any one know about this
View 3 Replies
Jan 31, 2007
how can I install and configure Red 5 media server in my web server?
View 5 Replies
Jun 11, 2009
If I publish using an Adobe Flash Media Encoder 2.5 or a normal client a netstream with codec NellyMoser at 8Khz, the audio stream is incomprehensible for a MAC OS or a Linux Adobe Player.Steps to reproduce:
1. Create a new Actionscript Project in Flex Builder, for example: AdobeBug.
2. Start a Flash Media Server 3.5 in localhost(rtmp://localhost/live).
3. Insert the following code in the Default Application file: AdobeBug.[code]
4. Compile and play the file. 5. Run the Adobe Flash Media Administration Console and play the stream named livestream using a Linux or a Mac OS system, but not a Windows system. This stream should be a Nellymoser audio at 8KHz.
Playback starts, but audio is unintelligible in Linux and Mac OS Adobe Flash player.Doesn't happen if I listen the stream using a Adobe Flash Player plugin or a Flash Media Administration Console for Windows systems.
View 2 Replies
Nov 27, 2010
I've already enabled the FMIS: Please enter your Flash Media Server 3.5.1 serial number.xxxxxx Congratulations. You have enabled theAdobe Flash Media Interactive Server! But my own application still fails :
[Code]....
View 7 Replies
Apr 25, 2011
I've been working with the Beginning AS3 Tutorial which streams a video from Flash Media Server. I've been trying to enable RTMPS for this demo and it works correctly in Firefox and IE on Windows (usingTLS == true) but does not work (usingTLS == false) in Firefox on Linux and Chrome on Windows. Why Flash does not currently support either of these browsers? I've verified against Openssl using s_client connect that the certificate chain was properly installed from the website's wildcard certificate -> intermediate certificate -> root certificate. Why doesn't it work in all browsers on all platforms?
View 1 Replies
Sep 9, 2011
We have several systems, inside and outside (development, test and production), that we need to upgrade FMS on Over time, I have found the process utterly cumbersome, prone to errors and time consuming... and outright annoying therefore.The permissions are never consistent, usually insecure (tmp and other directories world writable), and so onI wonder if anyone here has come up with a nifty way to work around this. For example, our setup is pretty uniform, so it's really unnecessary to do an interactive install all the time -- I could of course strip down the installFMS script, but I don't want to conflict with future changes
View 3 Replies
Nov 9, 2011
I deployed FMS 4.0 enterprise edition on my 64-bit linux platform. in the applications folder of FMS, i create a "dvr" subfolder and at the same time create a dvr.asc. the code is as the following :
application.onAppStart = function()
{
trace("app fme started!");
};
[Code]....
i expect the live stream will be recorded on the FMS server , but unfortunately nothing happened . But if i use my pc ( 32-bit windows xp platform) , everything works well. when i connect to my win_xp pc, the fms server automatically created a streams\_definst_myVideo.flv file under the dvr folder.
then the fms server on 64-bit linux cannot create the myVideo.flv file ?
View 3 Replies
Mar 27, 2011
This is pretty straight in windows. But how to do the 2 steps in linux?
View 5 Replies
