Flash :: Media Server 4 Enterprise Load Balancing?
Dec 4, 2010
G'day chaps, me and my mates have purchased a copy of Flash Media Server 4 Enterprise edition for use on our web project. Since we will be transmitting to large amounts of users through this exceptional piece of software, we will be needing to run more than one server at once. Before going ahead and doing anything against the policies we have decided to post here on the support forums and inquire about being able to run multiple copies of Flash Media Server 4 Enterprise edition with one Serial KEY ( 10 x GigE dedicated servers ). If this is not possible, how can me and my chappies load balance all the traffic through one Flash Media Server 4 Enterprise edition.
View 3 Replies
Similar Posts:
Jan 1, 2012
I have a load balancing problem for example I have two FMS servers I want to make aconnection between them if the first server overload the second can handle the request
View 1 Replies
Oct 2, 2011
so i was getting people embedding my player to there site and stealing my thunder.. so i changed allow all to my domain and well i cant connected with fme
View 29 Replies
Sep 14, 2010
What is the price of Flash Media Enterprise Server? The application level multicast is only available with this edition.
On this web site, there's no more information about this.
View 1 Replies
Nov 17, 2010
How do i lock it to my website only so no otherwebsites can use my server?
View 6 Replies
Nov 18, 2009
I'm attempting to install and run FMS on a Red Hat Enterprise Linux system. At one point, it did function properly, but now it will not stream video at all, and I keep getting a constant stream of errors. No changes were made to the FMS configuration to make it stop working. Attempting to load it in console mode results in the following:
-bash-3.2$ ./fmsmaster -consoleAdobe Flash Media Server (Master)Console mode.FMS detected IPv6 protocol stack!FMS config <NetworkingIPv6 enable=false>FMS running in IPv4 protocol stack mode!Host: uberserver IPv4: 127.0.0.1Server starting...Edge (13199) started, arguments : -edgeports ":1935,80" -coreports "localhost:19350" -conf "/opt/adobe/fms/conf/Server.xml" -adaptor "_defaultRoot_" -name
[code]....
The assert errors continue until I terminate the process.
View 6 Replies
Aug 5, 2009
Might be a dumb question but a client has Windows 2003 Enterprise SP2 R2 and I was wondering if Flash Media Interactive Server will install and run fine on it? The requirements on the site say Microsoft® Windows Server® 2003 with Service Pack 2 but no about "Standard" or "Enterprise".
View 5 Replies
Jan 12, 2011
We purchased FMIS and we are encoding large 15+ hour MP4 recordings using flash media encoder. When opening these large files for playback, which have not been opened recently the player displays the loading indicator for up to 4 minutes! Once it has apparently been cached on the server it opens immediately from any browser even after clearing local browser cache. So a few questions for the experts
1. Why is it taking so long to load the file. Is it because the MP4 metadata is in the wrong format and the file is so huge? I read somewhere that Media Encoder records with incorrect MP4 metadata is that still the case?
2. Once its cached on the server, exactly how much of it is cached. Some of these files are larger than 500mb.
3. What fms settings do you suggest I change. FMIS is running on windows server R2 64 bit, but FMIS itself is 32 bit. We have not upgraded to the 64 bit version. We have 8GB of ram. Is it OK to set FMS cache to 3GB. And would that only have enough room for 3-4 large files, because we have hundreds of them.
View 1 Replies
Mar 18, 2011
I have some Flash application that loads data (external images, SWFs, XMLs) from the same domain. And it was fine until client decided to add load balancers for server. Now we have a number of complaints from users about security errors. It looks like application can't load external resources treating them as resources from different domain without crossdomain.xml.
One of users that have this problem provided us with following info:
Browser: IE 8.0
OS: Windows 7
Flash Player version: 10.1.102.64
I have spoken with server administrator and he told me that we have load balancers that work like Round-robin DNS. In its simplest implementation Round-robin DNS works by responding to DNS requests not only with a single IP address, but a list of IP addresses of several servers that host identical services. The order in which IP addresses from the list are returned is the basis for the term round robin. With each DNS response, the IP address sequence in the list is permuted. Usually, basic IP clients attempt connections with the first address returned from a DNS query so that on different connection attempts clients would receive service from different providers, thus distributing the overall load among servers.
Finally we have: SWF loaded from IP1, data requested from IP2, crossdomain.xml loaded from IP1. All of them can be accessed through the same domain, but have different IPs.Because of IPs difference, Flash Player ignores crossdomain.xml and triggers security error.I'm not sure it happens exactly like that, since for older versions of Flash Player I have found the following words:
The basis of domain comparison is the domain name, not IP address.
So, I have two questions after all of that: How exactly domain comparison for HTTP-connections works in latest versions of Flash Player? Can two resources obtained by address with same domain name but from different IPs treatened as obtained from different domains? Maybe someone have info about DNS rebinding in different browsers?
View 1 Replies
Sep 1, 2011
in the standard embed code:
[Code].....
the player "FlashMediaPlayback" is loaded from remote ftp adobe server.
How can I load the player from my local machine?
View 1 Replies
Oct 6, 2009
I have an xml file that contains the ip values (2) to our servers, what I want to accomplish is: 1st read the xml and grab those values, 2nd randomly select one of those ip's and create the rtmp://...path to play the video, 3rd if one of those servers is down then use the other one to play the video and 4th if all servers are down display some sort of message to try again later. I am reading the xml and grabbing those values, I am randomly selecting an ip and creating the rtmp://...path, but where I am having problems is playing the video from the other server. What's happening is that when it hits the box that is down and swithes to the other box it actually show the first frame of the video but it doesn't play. Here is my code in my .as file:
package
{
import flash.display.Sprite;
import fl.video. *;
import flash.events. *;
[code]....
View 0 Replies
Sep 1, 2011
I'd just like to know whether I'm wasting my time bothering to contact some annoying sales people, if it is out of our price range. This is most likely for deployment of a Flex/Java app in a clustered environment. Community edition is not going to work here.
View 2 Replies
Nov 10, 2009
Can Adobe Flash Media Streaming Server 3.5 run on AMD Athlon Dual Sock Quad Core?I just requested a Dell server to be added to our farm to run as a Media Server and to my surprise, while reading the requirements for FMS it states the following: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended)
View 2 Replies
Aug 25, 2009
Medium-load chat server using Shared Objects segfaults every few hours. Runtime size has been increased to 30MB (this saves it from crashing every 10 minutes). I have the core dump but don't understand what it means.
View 9 Replies
Jan 13, 2010
I'm trying to troubleshoot a Flash Media Server working with a little video playback application I wrote a few years ago that has suddenly stopped working.I'm using CS3/Actionscript 3.My app uses the FLVPlayback Component, and was working well last time I checked. I recevied a report that the videos stopped working, and have been looking into it.I figured I'd add a bunch of event listeners to the FLVPlayback's ncMgr.netConnection so I could get debug info on things like io errors, net status, etc.The problem I'm running into is that the netConnection is null when I set it to anything on my Flash Media Server, and adding any event listeners to this netConnection throws errors.Here's what I've tried so far:
Playback of a local FLV file works fine.In the FLVPlayback documentation, I found an example and stole the URL of the stream they were using in the example, and that works fine, although it is an HTTP protocol stream rather than RTMP.Any attempt to access FLV files on my Media Server, which has worked fine in the past, basically cause the FLVPlayback object to sit and hang in "buffering" mode and never progresses beyond this point.The netConnection object in this case is null.Here's my code:[code]........
Again the purpose of this is to troubleshoot the video streaming from the Flash Media Server, and it seems like there is no netconnection to the server being created.Does this mean that the server is not working, or is there a problem with the way I'm trying to access the content on the server?This was all working fine before, and I have set up the server-side application .ASC files and such to allow things to work fine on the server end.
View 6 Replies
Jan 17, 2010
How can we automatically configure edge from the admin console of flash media interactive server?
View 1 Replies
Mar 27, 2010
I would like to know the number of connection allowed in the free developer ediiton of Flash Media Server.
View 4 Replies
Jul 22, 2010
I'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
View 12 Replies
Jul 18, 2011
Randomly on Sunday night the FMS Admin Console which you can access via [URL] stopped working, as in it would not load. It times out and Firefox says 'Server Not Found' It was working fine on Sunday morning and has been doing for a year now, I rebooted the server and that did nothing. I have no idea why it will not load as the server runs fine and I can still stream and everything.
View 20 Replies
Jul 1, 2010
I have to a problem using the Flash Media Interactive Server Feature Explorer. I want use the sample: RecordStream. I can see the instance "RecordStream" in console FMS 3.5. and show me the video in app AIR, but does not save the .FLV in my server.
View 6 Replies
Jul 6, 2010
Apply the security patch found here:http:[url]............For more information see the followingresource:CVE: 2009-1365
View 1 Replies
Aug 23, 2010
I have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 Replies
Oct 13, 2010
Our flash media server stops taking connection sometime. Any one have any idea about sophos antivirus?
View 8 Replies
Sep 23, 2011
is it possible fast forward, rewind video in flash media server through flash action script ?
View 5 Replies
Mar 23, 2012
I am using flash media server 4.5 for video streaming and genrate log files. In log file i have found the user publish point name in "x-sname" filed but this filed contains blank values in many events.This fileds contains value only in "PUBLISH,UN_PUBLISH,RECORD and PUBLISH_CONTONUE" event and other then these 4 events all events are not user related event.?I like to fetch the user bandwidth detials using these log files which user used how many bandwidth.I also like to know I can see serval files on flash log folder name "access.00.log,access001.log and admin.00.log,admin.001.log" Any one please explain what is the name convation for this filed how can i identifiy which files contains information for which date.?
View 1 Replies
Jan 2, 2011
I am trying to create a flash player to stream an on online Internet radio station using FMS. I chose FMS after being told that I need RTMP server to extract the metadata. Our radio audio is being encoded using a DJ interface called SAM Broadcaster. But for some reason, it does not have an option to send over the stream directly to a Flash Media Server. Only options are either IceCAST or ShoutCAST. How should i setup the stream? Should it be Stream encoder>> IceCAST/SHOUTCast Server>>Flash Media Server>>Flash Player Client. Or should I setup Stream Encoder>>Flash Media Server>>Flash Player Client? Shouldn't Flash Media Server be an alternative to IceCast or Shoutcast? If that is the case, how do I send over the stream from SAM Broadcaster directly to Flash Media Server without restreaming through another streaming server?
View 2 Replies
Feb 3, 2010
I'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
View 30 Replies
Aug 31, 2010
I am working on streaming programs through "Adobe flash Media Live encoder" in my website.The steps that i done for streaming is
* Installed Adobe flash media live encoder
* In the FMS URL entered as " rtmp://myserver ip/live "
* In stream given as "livestream"
* when i click connect the follwing error is displaying " Invalid primary FMSURL "
The website i am going to implement is [url]... which is done using PHP. Is there anything i have to do in coding to connect the media server.
View 1 Replies
Jul 19, 2011
when i try to live stream with FMS! I can stream video with Flash media live encoder to the server but when i create the player to recieve the livestream from server,i can not recieve the live stream,can anyone give me a step by step tutorial of how to do it?
View 1 Replies
Jul 17, 2010
I'm building a video conferencing applicaition for a portal. But now when considering which version of flash media server to buy, I run into some problem. So can anyone helps me about comparing this two versions: Flash Media Streaming Server and Flash Media Interactive server, like if I use Flash Media Streaming Server, some function like NetStream.pause() may not work or something like that? I'm not sure if this is a foolish question but please let me know.
View 3 Replies
