so i was getting people embedding my player to there site and stealing my thunder.. so i changed allow all to my domain and well i cant connected with fme
View 29 RepliesG'day chaps, me and my mates have purchased a copy of Flash Media Server 4 Enterprise edition for use on our web project. Since we will be transmitting to large amounts of users through this exceptional piece of software, we will be needing to run more than one server at once. Before going ahead and doing anything against the policies we have decided to post here on the support forums and inquire about being able to run multiple copies of Flash Media Server 4 Enterprise edition with one Serial KEY ( 10 x GigE dedicated servers ). If this is not possible, how can me and my chappies load balance all the traffic through one Flash Media Server 4 Enterprise edition.
View 3 RepliesWhat is the price of Flash Media Enterprise Server? The application level multicast is only available with this edition.
On this web site, there's no more information about this.
How do i lock it to my website only so no otherwebsites can use my server?
View 6 RepliesI'm attempting to install and run FMS on a Red Hat Enterprise Linux system. At one point, it did function properly, but now it will not stream video at all, and I keep getting a constant stream of errors. No changes were made to the FMS configuration to make it stop working. Attempting to load it in console mode results in the following:
-bash-3.2$ ./fmsmaster -consoleAdobe Flash Media Server (Master)Console mode.FMS detected IPv6 protocol stack!FMS config <NetworkingIPv6 enable=false>FMS running in IPv4 protocol stack mode!Host: uberserver IPv4: 127.0.0.1Server starting...Edge (13199) started, arguments : -edgeports ":1935,80" -coreports "localhost:19350" -conf "/opt/adobe/fms/conf/Server.xml" -adaptor "_defaultRoot_" -name
[code]....
The assert errors continue until I terminate the process.
Might be a dumb question but a client has Windows 2003 Enterprise SP2 R2 and I was wondering if Flash Media Interactive Server will install and run fine on it? The requirements on the site say Microsoft® Windows Server® 2003 with Service Pack 2 but no about "Standard" or "Enterprise".
View 5 RepliesI have a setup where I have some edge servers (as in <Mode>remote</Mode>) that pull content from an origin server. I only want to allow RTMPE connections to the edge server. I'm trying to do this by using the <DisallowedProtocols> element on the origin server. I'm setting: <DisallowedProtocols>rtmp,rtmps,rtmpt</DisallowedProtocols>
in the relevant Vhost.xml on the origin server. However, when I do that, proxying through the edge server stops working. I get a "Connection attempt rejected by FMS server [ Server.Reject ] : Connection failed." from OSMFPlayer (which I'm using for testing) and these lines show up on the origin server's core.00.log file:
[Code]...
I want to publish camera over FMS. But I don't want to use adobe security panel to be displayed(not even once) with setting as "access" by default.I wan't to set it allowed programatically.
View 3 RepliesI am trying to create a flash player to stream an on online Internet radio station using FMS. I chose FMS after being told that I need RTMP server to extract the metadata. Our radio audio is being encoded using a DJ interface called SAM Broadcaster. But for some reason, it does not have an option to send over the stream directly to a Flash Media Server. Only options are either IceCAST or ShoutCAST. How should i setup the stream? Should it be Stream encoder>> IceCAST/SHOUTCast Server>>Flash Media Server>>Flash Player Client. Or should I setup Stream Encoder>>Flash Media Server>>Flash Player Client? Shouldn't Flash Media Server be an alternative to IceCast or Shoutcast? If that is the case, how do I send over the stream from SAM Broadcaster directly to Flash Media Server without restreaming through another streaming server?
View 2 RepliesI have a swc plugin embedded in my product to stream live video to a group of recipients.The plugin uses the NetStream, NetGroup and NetConnection objects, the server I use to handle the RTMFP session is Influxis.One client creates a group as a publisher, and stream a live video.His Camera is enabled and I can see the video on the screen as well. The others connect to his group and play the video.Peer assisted Networking is enabled for both the publisher and the recipients.The plugin worked well in all 10.x versions (10.1/10.2/10.3)However, when upgrading to flash player 11.x, it stopped working.
-11.x to 11.x isn't working.
-10.x with 11.x isn't working.
-only 10.x to 10.x is working.
The server I use to handle the RTMFP protocol is Influxis.com I sent them the same question as well.The weirdest fact is that I'm using flash builder 4.6 with 4.6 sdk, which is aimed for flash player 11.1, and it is only working with 10.x flash players.
where we can download all flash player 9,8,7,6,5,4?
View 3 RepliesI had a question about RED5 & Adobe... Does anyone know if it is possible to broadcast multiple video chats using Adobe flash player from "RED5 flash server"?
View 2 RepliesI would like to show the live TV video on Flash player from my TV tunner. Is it possible to do it without FMS like using Webcam?
It will not be running on the internet/network and only for a computer that have TV tunner. (Ideally: open a swf and you can watch a TV tunner by flash player). But i cannot find any information if i can do it without FMS.
we are using flash interactive server 3.5 and have just noticed that when flash player upgrades to 10r32 the streaming fails? Is this a known issue and does anyone know if it is specifically a rtmp prob?
View 4 RepliesI'm trying to make a new flash player to stream a video from the vod folder. But after creating the player, the video doesn't show. It only shows the a blank screen with the player skin.
what's the format to put in the RTMPE url into the source/content path?
I am trying to embed a flash player as a pop-up from a web page.So far, we manage only to pop a new browser page which plays the "Flash" video, without a controlable player. what do i need to do to embed a player into the page, like here: [URL]or as a player as a pop-up above the page? do i need a flash media server for that or can it work with progressive download and no dedicated installations?
View 1 RepliesI have a Flash Media Streaming Server 4.0 running for more than a year now. I protect the access to my server through the "allowedHTMLdomains.txt and allowedSWFdomains.txt feature" (amongst other things...). We noticed that with Firefox 10.0.2 (last version) and Flash Player 11.1.102.62 (last version) our customers can't connect anymore. In the admin console we can read things like: Authentication failed for pageurl: [URL]
[Code]...
I have just installed Flash Media Server developer version 4.5 on my server, the Start Screen appears and keeps asking me to install Flash Player version 10.2 or above. I have repeatedly installed Flash Player 11 to no avail. I have tried to start the Admin Console but it just shows the 'get flash player' icon. I can confirm that Apache is running as I get an error from it when I try to access the Admin Console from the Internet. The Adobe web-site confirms that Flash Player 11 is installed and working correctly for the Operating System, Windows 2k8-R2. I have restarted the server to make sure everything has installed correctly, but it makes no difference.
View 1 RepliesI understand that the Flash Interactiver Server has this feature called 'Adobe Media Player Tracking Service' which the free version dosen't have. Any idea what ' Adobe Media Player Tracking Service' is and what it does
View 2 RepliesJust installed Windows 7 RC (7100), and got the latest Flash player for IE8 and Opera. My site [URL] has a music player I created that plays (streams) MP3s from a Flash Comm Server I run. The player works fine with Flash Player version 10.0.22.87 on other platforms, but not in Windows 7. Once you pick a song, it should start immediately. Even clicking the play button doesn't work. The symptoms make me think there's a problem establishing the netconnection for streaming.
I've read Microsoft added streaming of some kind in Windows Media Player for Windows 7, could it be interfering?
how to remove flash player security pop up for camera and microphone through coding.
View 4 RepliesCan we customize the flash player in Flash Media Server 4 like putting branding name (say some corner) like that? I am thinking to put my brand (my branding name) on a flash player while I streaming live event is it possible?
View 4 RepliesI would like to embedd into our application which is running in DirectX fullscreen player of Flash video stream protected with DRM. How can we achive it? Is it possible to buy library as for Microsoft DRM?
View 2 RepliesProbably this feature is in the next generation of FMS 4.5 However, it is said this can be achieved with some manipulation of files with current FMS. Can we do a 2-way live video session.
UserA(in webpage flashplayerV11 beta: encode using H264) -> Flash Media Server -> UserB at iPhone(either HTML5 or others to play the live video in RTMP/RTMFP)
Next step will be the reverse:UserA(in webpage flashplayerV11 beta: decode using H264) <- Flash Media Server <- UserB at iPhone(either HTML5 or others to publish the live video in RTMP/ RTMFP)Better to use UDP based.Seems the HTTP live streaming incurs huge delay 4-8sec; not really working for live video chat sessions.. So how Skype handle this on iOS? with its own encoding/decoding?
I am using the new Flash Player 11 ability to encode H264 video within the Flash Player. I am streaming the webcam via RTMP to a FMS. I am using the following settings:H.264 BaselineLevel 5.1Keyframe freq. 5 seconds25 FPSInput size: 1280 x 720 (720p)Output size: 1280 x 720 (720p)Bit Rate: 1000KbpsWhen I am using these settings with FMLE 3.2, the final stream plays very fluent with a good amount of FPS. If I am using Flash Player 11 for the encoding job instead, the final video is not as fluent as before and achieves less FPS (maybe 5 FPS).So the question is: is Flash Player 11 not as good as FMLE 3.2 or am I missing some configuration?
View 2 Repliesis it possible to play video stream from non-adobe(or homebrew server), in the newest flash player(10).It looks like the VideoPlayer only plays the stream from FMS? Is it the business model of Adobe?
View 2 RepliesI'm currently creating a whiteboard in Flash, and I want to be able to record all of the user interaction for later playback. Is it somehow possible to create a video of what the user is drawing?
View 1 RepliesI am trying to be able to play games on my Blackberry 8230 and I do not know which Adobe Flash Player/Flash Lite to download.
View 1 RepliesIs it possible to protect the broadcasted content from unauthorized copying users. In the demo version of FMS 3.5 for interactive broadcasting stream audio and video can be copied by means of such programs as Comtasia. This may not like the content holders. Perhaps there are some instruments of protection.
View 1 Repliesvideos from three sources have to be played within single flash player that we need to design.For the two VOD types, we have to provide the pause and play functionality.For IPTV, pause and play is not required, However, channel switching time is critically important here. The user should get the program behavior as close to TV experience as possible. This means channel switching should be fast. To provide this, buffering of video is required for multiple channels.
View 2 Replies