Media Server :: Storing Streams As Files?
Jan 31, 2011Is there a way to save FMS streams as files, such as AVI, MPEG or MP4?
View 1 Replies
Similar Posts:
Media Server :: Recording Live Streams And Play Files Later
Apr 19, 2011My Purpose is to record live streams on server side and play recorded files later. What I have done is -
1. Copied All files of applications/live in some safe location.
2. Copied all files from samples/applications/live to applications/live folder. (Deleted main.far from live folder)
3. Restricted SWF and HTML to mydomain in these files - allowedHTMLdomains.txt and allowedSWFdomains.txt
4. In main.asc I added these line in the end
var mystream;var intervalID;
[Code] .....
5. Then I restarted FMS and tried streaming using FLash Media Encoder. I was able to live stream and then i stopped it.
6. A FLV File was recorded in application/live folder with the stream name that i used in encoder.
I am able to view live video on my domain as well as some other domain, that means allowedHTMLdomains.txt and allowedSWFdomains.txt did not worked. Another issue is that I am not able to view recorded video after I stopped encoder but I was able see live video before stopping. I am using jwplayer to view the video and using flashvars streamer (rtmp://xx.xx.xx.xxx/live) and file(abc) to view the live and recorded video.
Media Server :: Record Streams In Chunks On Flash Media Server?
Jul 22, 2009I want to record a stream which is published with Flash Live Encoder to FMS 3.5, but split the recording in files with predefined length. For example if a stream 'webcam' is published I want to record it in chunks of 10 minutes: 'webcam1.flv', 'webcam2.flv' ... From what I can tell there's no facility to work with timers. The only solution I could think of was using stream.record() with a time limit parameter but that seems like a hack because it triggerstStream.Record.DiskQuotaExceeded on the stream when the recordin should stop and start recording another chunk. Has anyone done something similar?
View 10 RepliesMedia Server :: Recording Video/audio Files Using Flash Media Server Through Rmtp, And Allow Users To Access The Recorded Files Through Http?
May 25, 2009As titled, what is the way to record video/audio files using Flash Meida Server through rmtp, and allow users to access the recorded files through http?What I am trying to do, is to record a user's microphone's input and save it to the server.fterwards, I would like other users to be able to access the recorded files and mainuplating the audio data, by computeSpectrum(), to do some visualization of the audio. As I know computeSpectrum() cannot work on streaming files, so I think I need to access the recorded files using http instead of rmtp. Is that true?
View 1 RepliesMedia Server :: Make Server Sider(FMS) Two Streams,one Is Regular Another Is Compressed
Feb 1, 2010i am developing video chat system , one side is model, another sider is customer. Now i want that model sider stream sended to FMS, and then FMS make two streams, that the one stream is regular, the other stream is compressed. the compressed stream is just for administrator, so it should be small.
View 1 RepliesMedia Server :: 3.5.3 Freezing / Stuttering Server Playback Of Recorded Streams
May 24, 2010I'm using the server Stream.play() method to playback a recorded stream, it plays back fine until it hits the buffer limit (Say I set the buffer to 5 seconds, it will playback fine for 5 seconds). But then it freezes and playback is very stuttery (1 frame every 2/3 seconds). Is this a know issue? I'm using windows 2008 server. I've tried a few things to resolve this but no luck. The server is running the dev license and has no load.
View 13 RepliesMedia Server :: Application Doesn't Have Permissions For Server-side Record/append Of Streams
Aug 12, 2011I have configured FMS on Amazon EC2 I am trying to capture data from my webcam and push it to the server.For storing the webcam i created a new folder but as it is recommended in other forums "You need to replace the signed Live application (main.far) with main.asc in[FMS-Install-Dir]/samples/applications/live/ ;(For more Info: refer to documentations & live/readme.txt) "I am not able to locate samples folder from where i can get my main.asc file
View 4 RepliesMedia Server :: Manipulate In Any Way The Video Streams On The Server Side?
Jan 26, 2007I was wondering. is it possible to manipulate in any way the video streams on the server side? Like for example,to have two streams coming from two clients and mix them into one stream,so a third client (or more) can play just one stream per client instead of two?
View 5 RepliesMedia Server :: How Many Concurrent Streams Can Server Handle
Aug 19, 2010I am trying to serve streaming video over a 10 mb network and using Adobe® Flash® Media Streaming Server 3.5. Here are the specs on the video.
Video:
Codec: On2 VP6
320x240px
frame rate: 30fps
400 kbps (VBR)
keyframe distance: 15
Audio:
Mono channel
96 kbps
How many of these I could serve up concurrently? Or is there a spec somewhere?
Media Server :: Upgrade To 3.5 Now No VOD Streams
Aug 27, 2009We just upgraded our FMIS from 3 to 3.5. All our VOD streams were working prior to the updgrade. Now the streams do not play. When logged in to the admin and checking the Server Log, this is the message. I assume this is correct. I have **** out the address.
[Code]...
Is there anything more that I can check to see where this is failing?
Media Server :: Two Incoming Streams To The Same Box?
Oct 13, 2010I'm trying to figure out whether or not it's possible to have two incoming streams to the same FMS server. Every time I try to search this information, I find stuff on having multiple outgoing streams, but nothing on multiple incoming streams.
The two streams will have the same content, but will use different video / audio codecs, and be set to different resolutions / bitrates.
I don't want to spend the money on another server, so it'd be great to know if FMS can do this..
Media Server :: Possible To Audio Mix Streams In FMS?
Aug 11, 2011Is it possible to mix audio streams in fms (like fmg)?
View 3 RepliesMedia Server :: Automate And Manage Streams?
Jun 3, 2009Does anyone know if it's possible with any of the Adobe products to automate and manage streams?
We've got a project that will be streaming pre-recorded video and music. Due to the number and frequency of these streams we need a way for us to automate and manage these through our own CMS system.
We will be ultimately pushing these streams out to our CDN provider so no end user streaming actually required.
[Code]...
Media Server :: How Does A Client Receive Streams
Jan 15, 2010Do i need a wireless connection from the server. I am thinking of installing an access point to test the server.. The only challenge is i dont know how to get the client to receive streams.
View 7 RepliesMedia Server :: MetaData Of Recorded Streams ?
Feb 2, 2010I have a problem with recorded stream: The MetaData its partialy correct.Most of the informations are correct, but the 2 most important information for me width and height for the video are always 320 x 240 for any recorded stream althow they are published at different WxH.I tried to get my head around this but cant seem to figure out were the problem is.FMLE its used to publish the stream useing H.264 / MP3 codecs.Here is the server side code used to record the stream:[code]....
View 9 RepliesMedia Server :: Connecting To Live Streams?
Apr 26, 2010I've been using FMS for a few weeks, and feel relatively comfortable with it, but am currently having some trouble connecting to a live stream in a a video conferencing-type application. I suspect I'm leaving some small step out, but am having trouble seeing what that step is.
I have one client application open the video camera, connect to the FMS, and publish it's live camera stream to the server. Something like this:
Connect to the FMS
nc.connect("rtmp://<ip addr>9/chat_test/");
In my connection (success) handler:
cam = Camera.getCamera();
cam.addEventListener(StatusEvent.STATUS, statusHandler);
...
[code]...
However, I keep getting "NetStream.Play.StreamNotFound" errors. This seems relatively straightforward, but I'm clearly missing a small step somewhere.
Media Server :: Remove Lag From Live Streams?
Jun 4, 2010I am publishing 2 live streams from a computer with 2 video capture cards in it and I get a lag every 30 seconds or so on the subscribers side. I have tried adjusting the camera quality and setMode properties but still the lag persists inside and outside the LAN, is there a way to create a buffer on the server or adjust the way the live stream is received on the subscribers side so there is no noticeable lag? I saw something about editing application.xml to adjust the queue and a suggested bitrate but not sure if this is applicable, here is the link:
[URL]
Here is my setup:
The publishing computer:
2 PCI-e x1 cards, one takes S-Video (480i) and the other DVI (720p)
Windows 7 64bit
Intel i7
6 GB RAM'
GB NIC and Switch
From the switch is one hop to a GB router and out to a 10 MB pipe which leads to our datacenter 30 miles away. The swf on this side just gets the 2 cameras, sets the quality to (0,80) and mode to (640,480,25,false) (I have played with these settings a little) and creates 2 lives streams on the FMS.
The FMS:I am running Flash Media Interactive Server 3.5 on my own server with two 3.6 Dual Core Xeon processors and 4 GB RAM. This server resides in a Datacenter and has a 100 MB burstable pipe. From the FMS administration console I am barely using 4MB total bandwidth, 1% CPU usage, 2% RAM.
The subscribing computer:I have used many different types of hardwired PC's within the same LAN and outside the LAN, results are the same.The swf on this side just creates 2 new video instances and attaches the 2 netstreams to them. They are placed side by side and the height and width of these videos are undefined.
Media Server :: 3.5 - Take Multiple Live Streams?
Jun 17, 2010Can Flash Media Server 3.5 do the following?. Can it take multiple live streams?. Is it possible to control the ip streams - by using API's in to the Media Servers?.
View 4 RepliesMedia Server :: Finding The Opened Streams?
Sep 21, 2010After solving an important issue about the audio conference, i have another doubt. The question is, when the user enter in the conference, how can i get the opened streams of the server, in order to automatically let the attendee hear the presenter?
View 1 RepliesMedia Server :: FMS 3.5 Streams Stop Playing
Oct 4, 2010I have a fms 3.5 server that stalls when playing content regularly. After restarting through the admin console streams play again.
View 1 RepliesMedia Server :: Record Streams Directly In H.264
Jan 10, 2011Flash Media Interactive Server 3.5 or later supports recording of streams using the H.264 codec, directly on the server. Archive high-quality live streams so you can quickly deploy the content on demand after your live event is over, and use the free F4V flattener utility to prepare your file for video editing using Adobe Premiere Pro CS5."
there is no problem to record the stream in flv format but i don't find a way to record using h.264 compression
Media Server :: No Permission To Play Streams?
Mar 18, 2011When i publish the streams on a linux server, the .flv files have permissions like this:-rw-rw----. And i don't have permissions to access this file on a client browser... Currently, i can only change the permission using "chmod" manually
View 2 RepliesMedia Server :: Streams Internally But Not Externally
Mar 23, 2011We have FMS 3 on a server I'll call "Streamer" We have a public webserver running IIS on a server I'll call "Web Server". We host our website on Web Server, and both Streamer and Web Server are behind our firewall.
I made a page on Web Server with a flash file that has a Player which goes to [url]...
When we navigate to www.domain.com/test.html (which has the embedded video) from inside the network, we get the video streamed to us. However, when we get a laptop with an aircard connection up (to simulate a request from the web), the user gets a blank flash file with no video whatsoever.
On Streamer, the log file shows the IP address of my PC (the PC that made the request from the video inside the network) so that makes sense. But it shows no other request being made (like when the laptop/aircard made the request from the web).
We used wire shark and sure enough it showed that from Web Server to Streamer, there was traffic when it packet captured the internal request. But there was no traffic when the public request was made.
Media Server :: How To Stop / Ban Live Streams
Jun 15, 2011I own a site like ustream/justin where users can register and broadcast their channels using FMLE. Sometime I need to ban broadcasters after I receives any complaint against any channel. I do them on website, there is no issue in that. But how to do that on server side at FMIS. I need to do it bcause the stream users are already watching the channel page before it got banned, they still can watch it till they do the refresh. So I need something that can stop the Live Stream of that particular channel on FMS server too. How can I supply stream names to main.asc that should be banned or not to allow publishing without restarting server each time.
View 1 RepliesMedia Server :: How Many Streams Entries In A Vdir Can Have
Jun 30, 2011For a number of reasons (which I wont bore you with) we may have to interface our FMS servers over an NFS mesh to share disks. For example we have 6 core sites around the world and we want all core sites to see each others primary content store. Whilst we sort out the commercials for Aspera or similar to handle file replication properly, I had the idea to use <streams> to remotely mount each others disks (The disk systems here present themselves as NAS via NFS)So before you say No, don't do it im not sure I have a lot of choice at present.Its a large global core/edge deployment and the edges are implicitly configured to their origin.If i DID want to do it how many <streams> can I define before the server ignores them?
View 1 RepliesMedia Server :: Recorded Streams Are Different Length
Oct 31, 2011I am trying to record a video chat being done through FMS. I have made my program start recording only when the second stream publishes. Then, I stop recording when either streams stops publishing. In my last test I recorded a 45 minute chat. The resulting flv files show that there are 13 seconds difference between them. The video gets more out of sync as it goes along. My first guess is that it is something to do with dropped frames. Is there any way to force FMS to fill in dropped frames. I'm posting my code for starting and stopping recording:
[Code].....
Media Server :: Republish Streams From One FMIS To Another?
Apr 3, 2012we are streaming 24/7 live from a number of FMLE's to FMS Interactive server to a livepkgr cloned app., and to our clients we stream both to Flash via rtmp and to iOS via HLS.Since we want to introduce another server (to be able to serve more clients), the question is - hot to republish from one to another server so that both servers can stream rtmp and hls to clients?We are already using the backup url in FMLE to stream to a backup server - this we do not want to change since the backup server is just that - backup, if the main server fails.
View 2 RepliesMedia Server :: Protecting RTMP And HLS Streams?
Apr 7, 2012We have RTMP and HLS live and vod streams running on FMS interactive 4.5. Given that FMS documentation on security and content protection is very scarce I have the following questions:
1. How do I protect my live and vod RTMP streams from embedding in other webpages?
2. How do I protect my live and vod RTMP streams from capturing with special tools like rtmpdump?
3. How do I protect my live and vod HLS streams from embedding in other webpages?
4. How do I protect my live and vod HLS streams from capturing with special tools?
As far as I understood RTMPE is flawed by design because it can be captured with rtmpdump. SWFVerification also fails, because one can use exactly the same SWF player on their site. Can I somehow tell to my FMS server that it would allow only SWF player from my domain?
Media Server :: Streaming Flv From Folder Other Than Root Streams?
Jul 31, 2009Is it possible to stream from a folder other than the root streams folder...I want to stream from......... streams/user1/test.flv
View 1 RepliesMedia Server :: Listen To Multiple Live Streams At Once?
Sep 7, 2009I am developing an application where I need musicians to play together and I want to have an audience listen to it. I have created my publisher clients and they can create the streams, but now I want to take those multiple streams and combine them so that you can hear the guitar, singer, etc. all together.
View 8 Replies