I have a movie clip that has a mouse follow scripting, I would like it to perform a button task; when clicked navigate to a url. Am I dreaming, I am having a hard time getting this to work. Is this possible?
View 17 Replies
I am trying to create a character whose head will follow the mouse. I have made a character whose eyes are following the mouse, but I would like the head to turn with the mouse as well - like the cyber pets here.
View 3 RepliesIs there a way that I could make a symbol/button follow my mouse without having to drag it? for example, a car following the cursor.
View 4 RepliesI'm making a flash page with a basket movie clip that follows my mouse. The basket has a stop action on frame one so it stays there unless directed otherwise. Then I have a movie clip of a green berry that I made into a button (titled gb1). I need to make it so that when that is clicked it makes the basket go to the next frame (numbers change to show how many berries were collected). Here is my (unsuccessful) code as of now.
//1.
stage.addEventListener(Event.ENTER_FRAME,followBas ket);
//2.
function followBasket(event:Event):void {
var dx:int = basket.x - mouseX;
[Code]....
I found this tutorial [URL] and is wondering if I could limit the area where the clip can follow? I'm planning to have my cartoon's EYEBALLS follow the mouse move.
View 1 Replieshow to make it work.I have 3 layers.
1. top layer is an image of a cell phone with a blank screen (where I'd like the mask to be utilized)
2. the mask... which is paired with the cell phone image above.
3. the main/maskable image, which is only revealed by the cell phone's screen.
4. the very bottom image, visible all the time.
I need the base layer image (#3) to be static, and I need the top two layers to be able to follow the same mouse x/y coordinates. So far, I've only known how to have the mask and the masked image be one together, rather than be able to move the mask independently of the image I want to mask.
I am looking for a quick and simple way of having a movieclip follow the mouse with easing, until it reaches the mouse, at which point I want it to stop. It needs to ease out, so the standard cursorMC.x = mouseX will not do (also because it doesn't update the position of the mouse.
View 1 RepliesI have created a small flash movie where the eyes of the character follow the cursor. Its based on this one here Only problem is, it only works while the mouse is actually over the movie. Is there any way to increase the sensitive area to the whole screen without increasing the actual size of the movie?
View 1 RepliesI am using CS3 and trying to get an object to follow the mouse and having a hard time finding a tutorial on this, because all of the ones i have found want me to add the actionscript to the MC, and my version of flash won't let me do that. Flash expects me to attach it to the frame and so the code doesn't work.
View 11 Replies...without using the startDrag method. I know I can use code like this inside of a mouse event listener/function:
Code:
objectMC.x=mouseX;
objectMC.y=mouseY;
This code makes the object move with the mouse, but only if I move the mouse very slowly. When I move the mouse quickly, the mouse leaves the area of the object and thus the MOUSE_OVER listener stops listening, causing the object to stop.
I can't find any info on this so I guess I'll just ask. I'm trying to make moveclips that will follow the mouse pointer on MOUSE_OVER but only up to a certain distance then tween back to its original coordinates (preferably with a bounce or elastic ease).I tried startDrag(); on mouse over and that works quit cool but the problem is stopping the drag...
View 5 RepliesI'm trying to get a little mc to follow my mouse but stop when it gets to the "walls" (borders).
I first tried to test when the mc itself hit that _x value:
Code:
if (this._x <= 88){
_root.mc_go = false;
} else {
[Code]....
but when the mouse leaves the area, the mc does not continue to follow it all the way to the border, it just stops immediately.
I am creating a calendar and would like to be able to hover mouse over an event and it say text. The calander is saved as a PDF so it is only a picture.
View 2 Repliesmake eyes move and follow a mouse on the _x and _y axis, but the eye needs constrained with in an eye socket.I have used two mc to constrain while mousedown.
// mc_1
onClipEvent (enterFrame) {
bounds = getBounds(this);
[code].....
Using this code:
[Code]...
I have a compass that is rotating depending on the position of the mouse, however it rotates it from the top left of the stage not the movie clip, how to get the AS to recognise the centre of the compass.. Also, I thought a nice touch would be if the compass had a slight "wobble"
I have this kind of menu structure design (see image attached), and the way It needs to work is when the mouse goes close to a topic it follows it and when the mouse is a certain distance away it springs back to its orginal place?
View 6 RepliesI am trying to have a flashlight follow the mouse from it's pivot point. Rotating from its registration point, 180 degree rotation. Also have it move back to place if the mouse is off stage.
View 1 RepliesIm trying to make a object follow the Mouse_x while locked on a Guide line for the Y axis, but in the Test the object doesnt follow the guide.
how to make a object do a Half Circle motion?
I found several tutorials that work great for having movie objects follow the mouse but I haven't been able to find one that restricts it to only a certain area. This is one of the tutorials that I was looking at: http:[url].......What I basically want to do is have this hanging lamp tilt either left or right depending or where the mouse comes from.
View 1 RepliesI have a graphic replacing the mouse cursor and I'm having it so that when the user goes over a MC (called hitSquare in this case) the cursor graphic moves to a certain location on the stage, then returns to the location of the real mouse position.[code]The problem with this is that during the 0.5 seconds that it takes the graphic to return to the mouse position, the user can still move the mouse, so it actually goes to different co-ordinates and when the user moves the mouse after the 0.5 is over, the cursor just jumps to the new location.How can I make it so that the graphic smoothly follows the mouse, (even if it's being moved and has to update in real time) and then returns to the standard mouse follow code (cursorMC.x = mouseX; etc) once it's met its final destination?I take it this requires some "mouse trail" code that gets removed once it's caught up with the mouse.
View 10 RepliesI am trying to make a menu bar that when the mouse moves around from button to button it has a bar that follows under the text.I have found scripts for making a MC follow a mouse around the screen but I cant find anything for what I need.
View 8 RepliesI am working on a project that involves having a FollowSpot following the mouse until the user click on a button. Beeing fairly new to Flash, I searched on the Internet and came out with a few ideas but I could not find exactly what I was looking for. I have included the code that I now use as a test bench: Everything is included on one frame and it obviously has to loop until a selection is made.
View 3 RepliesIn my latest project I'm trying to have a line follow my mouse, I succeeded doing this with the LineTo and MoveTo functions this is what i have come up with [URL]if you will play with it for a while you will notice that sometimes the line is burned on the screen and just stays there,Another thing i want to achieve is that the line will be created out of a movie clip and will have animations and graphics in it insted of just plain color.
btw heres my code
package
{
import flash.display.*;
import flash.utils.*;
[code]....
i have a plane that gonna follow the mouse but i dont want the plane to stop when it reaches the mouse position , instead it needs to continue its wauy then follow the mouse when it moves again this is what i have so far package
{
import flash.display.MovieClip;[code]....
I really didn't want to have to post this question on any forums because it would be hard to explain, but I have spent far too many hours trying to figure this out so I have no choice.his is what I want to do: I want to have a little ball follow the mouse but not go into any walls at all. Here is a swf of my current attempts at doing this:As you can see, if there is a Y obstruction but not an X one, the ball will still follow mouseX, and vice-versa. However, there are some glitchy limitations as to having the ball follow mouseX when there is a Y obstruction and it must go over some hills to get to mouseX.Also, the code currently only checks to see if the four points around the ball are sinking into the walls, but it would be nice if it used more complex sphere calculations, or maybe 8 points
View 9 RepliesI'm trying to create a navigation bar similar to that of [url]....I have tried to code a rectangle box to follow the mouse, but with no luck.
View 1 Replieshow do I make it so that the an object only follows your mouse between certain points? I have a square with the code startDrag("", true). Then I put an if then statement saying...
if(this._x <=200){
startDrag("", false)
}
i just read the tutorial on mouse follow with easing.i've been trying to work on it not that its that hard but what i've been trying to do is to make an object get to the mouse with any easing at a constant rate probably i'm skipping on some concept, but i'm gettin into line equations n stuff .... which is makin the code really comlpicated and still there are some hiccups in the code [code]in this code , division with the constant "speed" is what results in the easing but i'm talkin about the object approaching the mouse at a constant rate
View 2 Repliessorry for this dumb one i am having a blond day, how do i make a movie clilp follow the mouse at all times without ease or anything fancy, i found lots of documentation of fancy things and was unable to strip them down to just a simple follow,
View 13 RepliesNot sure how to explain this, but I have a horizontal menu, and a small image above it that follows the mouse, within it's set boundaries. The only thing I have trouble with is getting it to stop right above the button when it's clicked, and wait for the user to move over the navigation menu again before it starts following the mouse... So, when a user clicks on a button, the image should stick there. I had the idea to have a transparent area above the nav that would detect for the mouse? Because right now, your mouse can be anywhere on the page, and this image scrolls right or left. How to set that up?
Here is the code I have on my image mc (called 'niteLite')... it's in the root (my navigation is in another mc though - couldn't get the mouse follower to work right within another mc, unfortunately)... On niteLite (image mc)
Code:
onClipEvent (load) {
_x = 347;
_y = 497;
speed = 2;
} onClipEvent (enterFrame) {
[Code] .....
