Is it possible to test my movie/scene from a specific position in my movie?
When I make subtle changes, I don't always want to preview my movie from the beginning, and when the movie gets long, it takes a while to make small changes when I have to preview my movie every 5 seconds.
So is there anyway to preview my movie from a certain spot in my animation?
My buttons only work when I click on them on the stage while having the "enable simple buttons" option on. They do not work if I try to "test movie," "test scene" and publish it to a SWF. Nothing responds whenever I am in these modes. I am using Adobe Flash Professional CS5 Actionscript 2.0.
This is the code that I put in for the buttons:
[Code].....
i have a movie that has worked fine in past during Html test but ive been doing some dubugging using the flash test latly and it runs fine here but when i go back and try to test in Html mode no errors come just the movie never fully starts (starts up about as much as if there was an error).
View 5 RepliesI have two scenes in my flash file and in scene 1, first button takes you to frame 2 where movie clip is -works
on (release) {
gotoAndStop("scene1",2);
}
second button takes you to frame 3
but on scene 2 that performs same function as scene 1, the first button
on(press){
gotoAndStop("scene2",2);
}
instead of going to frame 2 goes to frame 3. and the second button goes correctly to frame 3.that happens when i test scene! when i test movie all buttons work properly.
I have a single audio file, I'd like to avoid cutting it up.
I know I can use the sound class, mySound.play(150), to start at 150ms but haven't come across a way to stop the audio say after 500ms or at 650ms.
Here is the action scrip that I created. Correct it if you can.
Process.visible = false;
Cycles.visible = false;
stop();
[Code]....
I have simple sliding pages mechanism in my flash file, all done with AS3 code. Now the pages, which are movieclips, are slid off the screen on a button press. Sometimes, everything goes smoothly, but on some people's computers the sliding pages get stuck in the middle, and then the next slide starts from the wrong position. This throws everything off the loop.
View 1 Replieshow do i position movieclip exactly in the middle of the movie tru actionscript
View 3 RepliesIf you wonder why the movie starts over in the middel of the song, don't worry it's not finished :-)download the movie here: [code]
View 1 Replieshow do i position movieclip exactly in the middle of the movie tru actionscript
View 3 RepliesIs it possible to stop this effect using actionscript in the middle of a movie. For example If I inserted this in frame one of my movie, how would I stop this effect using action script in frame 20?
View 10 RepliesIs it possible to stop this effect using actionscript in the middle of a movie. For example If I inserted this in frame one of my movie, how would I stop this effect using action script in frame 20?
View 10 RepliesI made an effect in swish and i saved it in to an swf file i want to load that swf file in to my flash movie in the middle in which i have some text's and pictures
View 5 RepliesI'm currently making an animation which will eventually exceed the 16,000 frame limit (don't ask haha), so, short of making two movies and having to just start up the next one, what is the code for loading a movie? I presume they need to be in the same directory? So basically all I want is on the last frame of the movie the code executes and the second movie file opens up and starts. I guess I'd want the current movie to close, too.
View 1 RepliesJust wanted to know if any of you know the best way to test your project? We all know pressing (control + enter "Test Movie") will let you test the movie, but what if you have tons of art, music, and other stuff in your library? It can take quite a long time to load, just to test the movie. Anyway around this? Is there anything else I can do (already removed music, but need other art and graphics) to be able to test quicker?
View 1 RepliesI have a brand new Mac Pro (8-core "nehalem") and I'm having a very frustrating problem. While testing a movie within Flash, the Test Movie window will randomly go completely blank, showing the Stage color. The movie is still running, there's no error, it's just blank. When I resize the Test Movie window, everything reappears. Until a few seconds later, it snaps back to blank.I resize, it reappears, it disappears,I resize,it reappears, it disappears... over and over. Today is my first day really using this machine for Flash. The FLA worked perfectly fine on my old Quad G5 and on my Intel iMac at home, so I don't think it's an issue with my file. The graphics card is an NVIDIA GeForce GT 120 with 512MB VRAM. (the standard card that comes in the 8-cores.)
View 1 RepliesI'm not sure when it started happening, but I believe after the update my movie keeps looping if I test the movie. This never happened before. I'm not sure what went wrong? I never changed my action script or anything. What can be my problem?
and my stop(); doesn't work
when i use the "rest movie" function or even when i try to hear audio from the library - no sound. this problem is only with flash. all other audio programs work ok. i use cs3 for almost a year with audio - this is new problem which started few days ago.
View 1 RepliesI have had to go back and update my first ever Flash/ActionScript project. I was just learning so there are 1000's of lines of code all in frame. However, it worked and at least I understand what everything means. he problem:I made a bunch of changes, always doing several tests (test movie). I then made a backup of the file (luckily). I then noticed a number of more things to change, and after changing them and fixing some typos caught by the compiler, I test again. The progress bar slides across, disappears, and my movie never comes up. I checked the folder, and no .swf is there. When I publish, the same thing happens, progress bar completes, but no file was created.
Here are some findings from my own troubleshooting:-While compiling I open the folder and see the .swf is created then deleted- Backed up version still works (as well as other files) -- suggests I changed something causing the malfunction- No compiler errors (if I purposely create errant code, it will throw compiler errors though) -- contradicts conclusion of above- Copied all code (I think, didn't document which code changed too well) that was changed between backup copy and full-up-to-date copy to new blank file and compiled fine- Re-Save As-ed the full-up-to-date copy under new name and folder -- did not fix problem -- interestingly this new file is substantially smaller than original (og. 4.5 mb new 1.8 mb) -- also while trouble shooting the original file went from 4.5 mb to 3.8 mb
- Restarted flash and then computer - did not fix- Tried testing on different computer - Errant video loaded with a runtime error #2004 unhandled IOError Error #2036: Load Never Completed -- interestingly enough I don't recall there being any loader or loading going on in the whole programI did a search, and found some recommendations for a similar problem, but for them test movie would work once and then the person would have to restart flash to test again. This is not whats happening (and I did the recommendation anyway and none worked). Each post I see the same problem as here, there are never any responses (lets hope I break this trend).
I'm using Adobe Flash CS4 for the first time to try and make an animation set to music (like the opening scene of an anime). I need to listen to specific portions of the song so that I can match the timing of my animations.
I know that you can press Enter and it'll Play, but I don't know how to start listening to the music at the frame I want. I also don't know how to stop the music once it starts playing.
I also know I can do Ctrl+Enter to Test Movie, but that always starts playing my animation from the very beginning.
I want to know how to watch/listen to a specific part of the animation, without having to play it stop to finish.
I have just added a simple motion ( rotating word in additional frame ) the thing is that is comes to a point when it vanishes from the movie completely.The motion is not corrupted and I can see all the rotation when put "show redrawn regions " only. What's wrong ?.
View 2 RepliesI can't figure out why my font (type) hasn't been showing up in my Test Movie. I tried it first along with my first scene, and it didn't work. I put the type in a second scene (now 74, don't ask) within the same file, and it still doesn't show up. I'm using a mask to make the type appear and I know from tutorials, I have it going in the correct position to reveal the type. It's clearly not showing up. Even in Test Scene, it's not showing up. I've exhausted all my experience (which isn't saying much) to try
View 3 RepliesI'm working with Flash CS4. When I test a scene, all work just fine, but when I try to test movie, or export the swf file the process stops suddenly and nothing happens.
In my fla file I have 7 scenes and the file size is about 193mb.
When i click Test Movie no compiler errors,But when my scene finishes, On the bit where all my actionscript is..And output tab pops up with this error:TypeError: Error #1009:Cannot access a property or method of a null object reference. at JoeTorranC_fla::MainTimeline/frame160()I have 3 Layers,Layer 1 has the actionscript code and some text,Layer 2 has a button and a motion tween,Layer 3 has a button and a motion tween,The actionscript code in Layer 1 is this:stop();
tutorials.addEventListener(MouseEvent.MOUSE_DOWN, myBtnHandler1);
function myBtnHandler1(event:MouseEvent):void {
gotoAndPlay("Scene 59");
[code].....
I am creating a 4 frame application demo which stops on the first frame and lets the user navigate to other frames using buttons. I've done something very similar before and didn't have this problem. Now with this new project I've created the pages in photoshop and imported them onto the stage. The dimensions are 1024/768 px. When I go to Control -> Test Movie -> In Flash professional. The window pops up very small , but the page looks nomal size so i get the top left portion of the design. Then when i expand the window, instead of seeing the rest of the design the desing floats to the bottom right as I pull the window open leaving all this white space around the top and left margins.
View 2 RepliesI am creating a flash website and have a stage which is quite large (720 x 100 px). Therefore, when I do test movie in flash the content appears very small so that it fits all on the screen. When I try to zoom in, no scrollbar appears, however, to enable me to view all the content. Is there a way to zoom in the content of the flash movie & have the scrollbar appearing once this is done?? Or do I have to create it manually??
View 7 RepliesWhen I go to test my movie in Flash Pro (control>test movie) nothing happens except a window thats just white.why this may be happening? I just battled some sot of memory problem which is mysteriously resolved ( i didn't do anything). Another funny thing being when flash pro is set to flash player 9 action script 2.0 all is fine...anything else it makes my whole project dissapear from the stage? Getting pretty sick of these funky things happening randomly.
View 15 RepliesFor my final project we have to make a flash video player with a custom skin to upload to our websites. We did something similar to this with our first project but this is supposed to be a youtube like flash player.We kind of got pressed for time and were not able to go into detail with this project so the teacher gave us the code and I put it in exactly how it should be but im pretty sure i have something misplaced or I am missing a step. I get about 9 different errors when I go to test the movie. and nothing works.I am doing wrong or can you point me in the direction of a tutorial on this as I have been searching for tutorials on this with no luck.
ActionScript Code:
import fl.video.FLVPlayback;
import fl.controls.List;
[code].....
I've encountered a strange problem with a game I'm making with flash cs4, as3. When I test my game with ctrl+enter within flash, it works fine, but if I try it again, it doesn't load at all. Basically, I open flash, test movie, it works, do absolutely nothing except close the test movie window and test it again, and it doesn't work.
I put a trace as the first line in the constructor function of my document class and that doesn't output anything on the second test. If I close flash and reopen it, it does the same thing; the game will work fine the first test and any tests after do nothing. When it doesn't work, no errors are reported whatsoever.
The first test of any movie, after opening the Flash program (CS5 Pro) will work as expected. However, every test after thereafter will ignore the ActionScript completely and play on a continuos loop. After attempting to debug one of these instances, Flash gives me the error that the movie cannot be debugged because the .SWF contains no ActionScript.(I've tested several movies, with AS as basic as a single stop command and nothing else. I've tested the files on another machine. I've reinstalled Flash. Closing Flash and opening it again provides one more "fresh" test that works as expected. Finally this has not always been the case, the program was working fine for a few months (so I don't think the install CD is corrupt).
View 1 Replies