Change Movie Clip Speed?
Mar 30, 2009
I have a looping movie clip and want it to speed up when the mouse rolls over one of the ends. Is there and action script that will do this? Or a different way to get it done? I faked it by making two movies with different number of frames but when you load that movie it starts over and it looks stupid. I have the scrolling animation on the site but want to put that effect on it. Click the first box after the intro to see the animation at the bottom(line of trucks) http:[url].....
View 1 Replies
Similar Posts:
Aug 7, 2010
I want to add an animated .gif file to my movie. So I created a new symbol and then imported the .gif file to the stage. This created the symbol containing the animated .gif.I dragged the symbol onto the scene where I want it. However, the animation seems to play at a different speed (fps) than normal. So I changed the fps of the symbol (at bottom of Timeline where it says "fps"). But for some reason this changes the fps of the rest of the entire movie.
View 3 Replies
May 2, 2010
Is there a way I can speed up one particular movie clip in my project? I've tried changing the frame rate, but obviously this changes the frame rate for the whole project which isn't what I want.The current project frame rate is 20fps, and I need this one movie clip to be running faster at say 30fps.Is there a way I can perhaps achieve this using Actionscript 2.0?
View 4 Replies
Sep 3, 2009
I am trying to increase the speed of a movie clip by using a slider. Can someone point me to some information on how to do this? I found this but am not sure my version is picking up the change in frame rate accurately
View 1 Replies
Mar 15, 2007
I'm trying to control the exponential speed of the attached movie clip with AS but don't know where to start.I want the words to scroll through slowly at first and over 4 seconds the speed increases until they are all a blur.
View 2 Replies
Mar 2, 2010
In my document I have my actionscript on Layer 1. In this I duplicate an enemy movie clip.The controls for moving the enemy are inside the enemy movie clip, so setting speed, where to start from etc.On the Layer 1, I also run a script which acts as a timer, and when it reaches set values (eg. 10 seconds) it "levels up" (basically just changes background colour). I wand this to increase the speed of the enemy movie clips so that they get faster. I have this code:
Actionscript Code:
for(i=1;i<=enemies;i++){ _root["enemyRight"].duplicateMovieClip("enemyRight"+i,i+1000,enemyRight);
[code].....
View 2 Replies
Mar 1, 2008
When a movie clip is clicked on, another movie clip will fade out.The problem is that the clip that needs to fade out just disapears in a second, is there a way to controll the speed.I read a lot of info about this for complicated setups, is there a simple fix for this.I was hoping I could just do this designR_mc._alpha = 0/4;But that does not work.HERE IS THE CODE
design_mc.onRelease = function()
{ designR_mc._alpha =0;
}
[code].....
View 4 Replies
Jul 24, 2009
is there anyway to change a songs playback speed depending on a speed variable. heres the kicker tho im limited to using only as2.
View 2 Replies
Mar 23, 2010
I have a movie clip on my scene which has a speed applied to it making it move across the screen. This is duplicated when it reaches the other end of the screen.On my scene I have some action script which is acting as a timer. After a set time I want it to increase the speed of the movie clips, making the game become "harder". I seem to be able to manipulate the alpha of my movie clips but can't seem to trigger the speed increase.If i use a setInterval it seems to trigger the speed increase but it does it each time the movie clip is duplicated (so the delay resets, it does not change once and apply throughout)However, where I am changing the alpha I cannot seem to change the speed.
View 2 Replies
Oct 22, 2006
Does anyone know whether it would be possible to set a motion path for a movie clip and to have the speed of the tween set as a variable which can be increased or decreased by the user during the movie?
View 3 Replies
Jun 3, 2011
i want to create a sine wave and its speed will change depends on change in freequency and wavelength . and stop the wave movement when we click stop button.[code]
View 0 Replies
Dec 30, 2005
i wanna change color of mc. I have buttom Test and Parametri. In Test is movie testing.swf in Parametri you can change color of movie clips. in file starttesting is make like this:
in layer1 is mcPlayer. In this mcPlayer are three layers, action, container and buttoms. in action layer is this code:
Code:
mcButtonParametri.onRelease = function():Void{
addWindow("mcPar");
}
[Code]....
How can I change color of mcOksid(testing.fla), but color will be change when i push a upload buttom? WHen i push reset buttom, the color will come back to default.
Second problem, in testing.fla in layer OKSID, i have mcOksid and mcOksid2. Know if i change color of mcOksid to blue, mcOksid2 has to be blue too.
View 1 Replies
Jul 6, 2009
i want to change frame rate of movie clip during run time on button click.....i have 3 movie clips...and i want to control the frame rate on button click...am using attachMovies to play the movieclips.
View 1 Replies
Apr 13, 2010
I have a movie clip to display a clock and a datagrid for showing my schedule. I want my flash to alarm with sound when the time from the clock match one time on the schedule. Here is my actionscript:
Code:
clock_mc.onEnterFrame = function() {
if (_root.timer[i]==_root.clock_mc.clock_txt.text.substr(0,5)) {
alertSound = new Sound(alertSoundMc);
[Code]....
As you can see, I use onEnterFrame to listen and check matching between time on clock and schedule but it will check all the time and when it alarmed it produced sound all the time while the time is matched. I would like my flash to alarm only one or few times.
View 3 Replies
Jan 26, 2009
I want to have my character walk around in a faux 3-d space using the arrow keys on the keyboard. When the character walks away it becomes smaller and when it walks closer it becomes larger. I have put together a script that pretty much does what I want - except the ratio of the height and width of the MovieClip do not stay the same. It becomes fatter as it walks away and skinner as it comes closer. Here is my main script:
[Code]...
I think the problem is with the operator here: ratio = this._height/this._width; The slash between "height" and "this" seems to be what is giving me trouble. Maybe I should be writing some other script entirely? I am not very good at script writing.
View 5 Replies
Jun 23, 2009
i'm trying to replace text in a dynamic text field within a movie clip, and it seems as if it's treating it like static text.
theBtn1.addEventListener(MouseEvent.CLICK, adjustText1);theBtn2.addEventListener(MouseEvent.CLICK, adjustText2);function adjustText1(e:MouseEvent):void{ textField1.text = "Foo"; // this works}function adjustText2(e:MouseEvent):void{ theMC.getChildByName("textField2").text = "Bar"; // this doesn't}
It throws this error:
1119: Access of possibly undefined property text through a reference with static type flash.display:DisplayObject.
View 2 Replies
Nov 4, 2009
Greetings! iam trying to change color of a movie clip in AS3 using transform command and the following code:
import flash.geom.ColorTransform;var newColorTransform:ColorTransform = box.transform.colorTransform;
newColorTransform.color = 34171200;box.transform.colorTransform = newColorTransform;
hw can i find the color number? newColorTransform.color = 34171200; previously i use in AS2 like 0xff0000 for red i will find it from the color palete..
View 1 Replies
Sep 25, 2009
I have movie clips which I made act as buttons, (Previous, Pause/Play, Next).[code]...
The button is a non-filled circle with the proper symbol in the center.
I am going to add themes to my application, where people can choose a pre-selected theme, which will load all info through a xml file (background-image, button colors, scrubber colors, etc).
How would I change the colors of the buttons in my movie clip? They are pre drawn images, that are stored in my library.
View 0 Replies
Jan 21, 2010
It it posible to change the movie clip name with code.Something likemc1._name = 'mc2';
View 2 Replies
Jul 8, 2010
i'm trying to replace text in a dynamic text field within a movie clip, and it seems as if it's treating it like static text. Is there a way around this?
theBtn1.addEventListener(MouseEvent.CLICK, adjustText1);theBtn2.addEventListener(MouseEvent.CLICK, adjustText2);function adjustText1(e:MouseEvent):void{ textField1.text = "Foo"; // this works}function
[code]......
View 9 Replies
Mar 30, 2011
I am creating a green circle with a white arrow inside it and want arrow to change from white to green and the circle to change from green to white when user mouses over it.My function is the following:
ActionScript Code:
private function DrawSliderPrevBtn():void
{
SliderPrevBtnMc.graphics.clear();[code].....
View 3 Replies
May 27, 2011
I am new to actionscript forums and also actionscript 3. I have some questions related to AS3.
I have made a simple square in flash cs4 converted it to a movieclip.Is it possible to fill the square using AS3 ?
I am making a program that tells the shortest value required from one end of a maze to the other. How can i animate this in flash using as3 ?
View 1 Replies
Aug 24, 2009
I am creating a flash presentation for school. I am unable to solve this problem, that keeps on pestering me.The problem is:I am trying to create a touch screen calibration movie clip. The only problem i keep running into is, when i click the calibration touch screen cross, what is the script that allows the change in position of the cross after it has been clicked on?Example:The original cross is orientated on the top left of the screen, after it has been clicked i need it to move to the top right of the screen, then clicked again - bottom right, and again bottom left and finally clicked again to be displayed in the centre
View 1 Replies
Feb 12, 2003
how I change the direction of a movie clip. And how to make it change in the same it's moving.
I have random movement code on the clip, I just want it to rotate, in the direction it goes.
View 2 Replies
Apr 11, 2003
I am about to go crazy trying to change the property of a movie clip. Could someone tell me why this doesn't work:
movieheight = _root._level1.project._height
_root._level1.mytext = movieheight
-movieheight is a variable in the movie which has been loaded into level1. -project is a movie clip (I made sure I named it properly). -mytext is a text box in the main timeline of the movie in level1. (I set the variable to mytext for this box too). I have tried to use eval("_root._level1.project.height"), but nothing works - the movie's height never shows up in the text box. Debug > List Variables tells me that movieheight is "undefined".
View 1 Replies
Dec 18, 2006
Here's the code from a button that controls a movie clip on the main page[code]...
The code works fine when the button is on the main timeline. However, I have a new complicated rollover button which is no longer on the main timeline. How do I change the path to the "container" movie clip?
View 3 Replies
May 31, 2007
just wondering if there is a script that could let me change the way that a movie clip behaves, for example, I have movie clip "a" and in a certain frame I have the function;
a.onRollOver = function (){
gotoAndPlay ("that");
}
can I later have a script that removes the onRollOver property so that the movie clip is once again JUST a movie clip and not a movie clip button?
View 1 Replies
Sep 3, 2007
I know when you assign an empty movieclip or a movieclip to the stage via actionscirpt you have to set a z depth on the layer.
Is it possible to change the depth of the movie clip? If so how?
View 1 Replies
Jul 1, 2008
How can I change what movie clip an object is contained in after it has been added to the stage? I want a movie clip to start out in the main stage but them move into another movie clip so that when I move the containing movie clip the sub clip moves as well.
View 1 Replies
Apr 9, 2009
This is probably super easy, but it's kind of hard to search for...Basically, I'm working on a site... http:[url]....
index.swf is the navigation, which by default calls forth index2.swf in the movie clip
var l = new Loader(); page.addChild(l); l.load(new URLRequest("index2.swf"));
I want to be able change what external swf is loaded in the movie clip via the URL.So index.swf?url=media would load index.swf with media.swf in the movie clip.
View 1 Replies
