I am trying to increase the speed of a movie clip by using a slider. Can someone point me to some information on how to do this? I found this but am not sure my version is picking up the change in frame rate accurately
View 1 RepliesI have a movie clip on my scene which has a speed applied to it making it move across the screen. This is duplicated when it reaches the other end of the screen.On my scene I have some action script which is acting as a timer. After a set time I want it to increase the speed of the movie clips, making the game become "harder". I seem to be able to manipulate the alpha of my movie clips but can't seem to trigger the speed increase.If i use a setInterval it seems to trigger the speed increase but it does it each time the movie clip is duplicated (so the delay resets, it does not change once and apply throughout)However, where I am changing the alpha I cannot seem to change the speed.
View 2 RepliesI've been working on a flash animation that has been set to 12frames per second, but now my boss has told me it needs to be 25fps - but when i change the frame rate in 'modify>document' the whole thing just speeds up. Is there a way to increase the fps whilst retaining the original speed?
View 1 RepliesThe Loaded Swf File Inherits the Frame Rate speed of the Main TimeLine,
Is there a way to control the frame rate of the loaded Swf File.
If I have loaded a Swf File to a Movie Clip container, How can I control the speed of Movie_ClipInstance.CurrentFrame .
As part of a preloader I have a 19 frame movieclip of a 3d star rotating created in swift 3D, it rotates above a normal load bar that shows progress. Currently the star is a separate clip from the loadbar and just rotates as the movie loads, how can I tie the two in together so that the rotation speed of the star gets faster as the movie loads. I have an idea how to do this using tweens but because the star is not animated using tweens, swift generates 19 different frames I'm a bit stuck
View 6 RepliesI'm developing a touch-screen Flash application for a shoe store, and it runs fine initially, but slows down toward the end of the day. I've been diligent with removing event listeners and so on. I've now narrowed the problem to be very specific - it's one section of the application causing the problem, and one part of that section:
- I have a main movie clip which contains the animation, which itself contains 5 nested movie clips, each with their own timeline. All movie clips have a stop action on the final frame. images are transparent PNGs with outer glow "filter" - the issue is not with performance as such, but with CPU increasing over time. Each time you play the clip, there is a small amount of CPU usage that 'sticks' and doesn't get freed up. What happens is that if you play the movie clip many (MANY MANY) times, then eventually it starts to slow down. Mac's Activity Monitor shows that the idle CPU usage is increasing slowly, over many times of playing the clip. It's insignificant with each play, but adds up over time.
You may be inclined to say: oh filters effect CPU, so it will be slow - but it isn't slow until it plays many, many times. Initially it's fast. I've uploaded a .zip with .app and .exe versions of my problem section. There are two files of each type: AutoPlay.app (& .exe): plays the problem clip repeatedly (I've just removed the final 'stop();' frame), so you can leave it open and come back in half an hour to see it slowing down.
ClickToPlay.app (& .exe): Plays the problem clip once when you click the 'play' button, so you can click several times, let it return to idle, and verify that the idle CPU usage is in fact increasing.
[Code]...
I have 60 frames I want to increase the fps value for frames from 20 to 30, and the remaining frames fps value should remain the same Using Action Script 3 or Action Script 2
View 10 RepliesI'm trying to increase the speed of a single movieclip. The frame rate of my movie is 12, and I don't want to increase the frame rate of the entire movie just to speed up one movieclip.
I've seen tutorials all over the web, and all the actionscript controlled speeds of movieclip tutorials are for more interactive animations, such as mouse movements and rollovers.
I'm looking for something that simply plays a movieclip faster on the timeline and I'm sure there is a simple code for this.
I'm working on this "game" and I currently have a ball that increases in speed as you hold down the arrow key. What I am now trying to accomplish is I want the ball to ease to a stop when the user let's go of the keyboard key (onKeyUp). Here's the File. <---Link
Here is my code so far:
var speed = 10;
ball_mc.onEnterFrame = function (){
if(Key.isDown(Key.RIGHT)){
this._x += speed += 1;
} if(Key.isDown(Key.UP)){
[Code] .....
So once you let go of the Keyboard Key I want the ball to slow down to a stop.
I am trying to make a simple game where there are five balls that bounce around the screen and speed up at set intervals. You have to dodge them for as long as possible. Right now I have the game set up so that you dodge for 15 seconds and you win - but I can't delete the balls that are bouncing around, and I don't know how to put in a reset button. I have also tried increasing the variable this.speed inside my interval statements but it doesn't work.
View 3 RepliesIs there a way I can speed up one particular movie clip in my project? I've tried changing the frame rate, but obviously this changes the frame rate for the whole project which isn't what I want.The current project frame rate is 20fps, and I need this one movie clip to be running faster at say 30fps.Is there a way I can perhaps achieve this using Actionscript 2.0?
View 4 RepliesI have a looping movie clip and want it to speed up when the mouse rolls over one of the ends. Is there and action script that will do this? Or a different way to get it done? I faked it by making two movies with different number of frames but when you load that movie it starts over and it looks stupid. I have the scrolling animation on the site but want to put that effect on it. Click the first box after the intro to see the animation at the bottom(line of trucks) http:[url].....
View 1 RepliesI'm trying to control the exponential speed of the attached movie clip with AS but don't know where to start.I want the words to scroll through slowly at first and over 4 seconds the speed increases until they are all a blur.
View 2 RepliesI am attempting to attach a slider bar to a movie clip. The movie clip is of a face morphing from emotion to no emotion. My ultimate goal is to have the viewer choose when the emotion has disappeared by moving the slider bar.
View 1 Repliesi have a movie clip in my library and i would like to add to appear in the middle of the stage. However i also have a slider from components, and what i would love to happen is that as i slide the bar the movie clip that i want to appear on the stage to duplicate/copy.
View 6 RepliesIn my document I have my actionscript on Layer 1. In this I duplicate an enemy movie clip.The controls for moving the enemy are inside the enemy movie clip, so setting speed, where to start from etc.On the Layer 1, I also run a script which acts as a timer, and when it reaches set values (eg. 10 seconds) it "levels up" (basically just changes background colour). I wand this to increase the speed of the enemy movie clips so that they get faster. I have this code:
Actionscript Code:
for(i=1;i<=enemies;i++){ _root["enemyRight"].duplicateMovieClip("enemyRight"+i,i+1000,enemyRight);
[code].....
When a movie clip is clicked on, another movie clip will fade out.The problem is that the clip that needs to fade out just disapears in a second, is there a way to controll the speed.I read a lot of info about this for complicated setups, is there a simple fix for this.I was hoping I could just do this designR_mc._alpha = 0/4;But that does not work.HERE IS THE CODE
design_mc.onRelease = function()
{ designR_mc._alpha =0;
}
[code].....
I am trying to add action script 2.0 to a slider that i created using http://www.kirupa.com/developer/mx/slider.htm that slides a movie clip that is a timeline from left to right. In the timeline are (i)More... buttons that will reveal more information. I just need to know how to integrate the timeline into the code using as2 to make it slide when the slider is dragged..
This is the action script that I have on the slider movie clip as stated in the above tutorial. But this is ALL the action script I have on EVERYTHING..... I know I need more to make it pan the timeline but I dont know how to do it.
[Code]...
I really could just use a good tutorial that shows me how to link the image that im sliding to the slider bar. When the slider is moved to the right... the image flows left.... toward the end of the timeline. When the slider is all the way right. The end of the timeline is shown. The timeline is bigger than the stage so the slider is on a line with years on it.
iam trying to bulid a slider which will change the alpha of another movie clip named light.how do i do this. here is the actionscript i have so far:
Code:
onClipEvent (load) {
top = _y;
[code]....
Does anyone know whether it would be possible to set a motion path for a movie clip and to have the speed of the tween set as a variable which can be increased or decreased by the user during the movie?
View 3 RepliesI am trying to design a very basic flash game. The basis of which is that there is a slider at the bottom and objects fall from the top and you have to avoid them. However, if the object lands on the slider, it also has to become part of the slider and so the area of the slider increases. I am unsure of how to code this last bit as the properties of the slider must change.
View 1 RepliesonClipEvent (load) {
MinX = 0;
MaxX = 200;
this._x=100;
FRAME = _root.p1;
}
[Code]...
p1 is the instance of the movie which I am trying to move with slider. When I apply above code on the handle of the slider with instance name 'handle' everything works perfect. Slider moves and so do the movie. Now instead when I bring the same code to the main timeline to do the same, onClipEvent does not work, it gives error. So I replaced it with the code written below. Now I can move the handle but movie is not moving.
[Code]...
I am trying to create a slider that will move a series of images in a movie clip based on the location of the slider. The problem I have is that when you click and drag the scroller it will move the images once but after that the images will not move. I am guessing that the problem is with my code. I want to move the _x of the images movie clip based on the _x of the slider. Here is the code I am using which is placed in frame one of the "timelineSlider" MC:
[Code]...
If it will help I can send the the original .FLA file by email as it is too large (225kb) to post on the forum.
I would like to know if there is a way to update the position of the thumb on the Slider component when a movie clip plays. Currently I have a movie clip symbol on my stage with the instance name ShapeMC. It has about 10 frames or animation and two actions. the first frame has a stop action as does the last frame. The actions are on their own layer, separate from the actual animation. I also have the slider component in my library, but it is only there so I can reference it through AS3. My AS3 instantiates a variable of type Slider. I then define the properties, like the width, hieght, thumb size, minimum, maximum, as well as enabling livedragging. I did this so the user can drag the slider and move through the Movie Clip symbol. I added a button that allows the user to click it and autoplay the Movie Clip symbol (ShapeMC). All that works. What I would like to do is when I hit the play button, I would like to see the thumb on the slider move along the slider as the Movie Clip symbol (ShapeMC) plays. So if the Movie Clip symbol reaches frame 5, the slider thumb show be seen as being half way through the tread. I tried putting the currentFrame into the .value property of the slider, but that didn't do anything. No errors, but it didn't move the thumb at all.
View 3 RepliesI have a menu bar as a movie clip and another movie clip acting as a slider. I want to on pressing a button on the Manu bar movie clip get the slider to slide across with easing. however I don't want the easing to be infinite so can't use a this._x*=.9 or some decimal < 1. Loop function only acts on the sinle fram so it too quick to see.
View 1 RepliesI am hoping to create a nav device similar to that on the ite. Find the circular nav thingy and move it left and right to move the environment in the background. See how it speeds up the further it gets away from the centre and slows down to a stop when gets back to the centre. I am not worried about the zoom effect butcreating the left and right movement. I am not much of a coder as I am graphic designer.
View 2 RepliesI've been following/combining a few tutorials across the Internet. I'm looking at controlling the speed of a video with a slider. I've currently got the slider working and the video on stage but I'm a little unsure as to the algorithm required to make such a slider work. The video I want to control needs to move from half speed, 0.5-1 on left half of the bar and to double speed 1-2 on the right hand side of the bar.
The below is my code so far.
Code:
import flash.events.MouseEvent;import flash.events.Event;
import fl.transitions.Tween;
import fl.transitions.TweenEvent;
[Code].....
I'm looking for 1) an algorithm to slow/increase the speed and 2) a way to use the videoSpeed var to control the speed of a Movie Clip.
Is it possible to control Speed of timeline with button or Slider?
View 2 RepliesI want to add an animated .gif file to my movie. So I created a new symbol and then imported the .gif file to the stage. This created the symbol containing the animated .gif.I dragged the symbol onto the scene where I want it. However, the animation seems to play at a different speed (fps) than normal. So I changed the fps of the symbol (at bottom of Timeline where it says "fps"). But for some reason this changes the fps of the rest of the entire movie.
View 3 RepliesI used this tut to create a menu. [URL] And my question is; Can I make the slider to move after a movie clip symbols instead of button symbols? That way my menu would be animated.
View 1 Replies