i have a movie clip in my library and i would like to add to appear in the middle of the stage. However i also have a slider from components, and what i would love to happen is that as i slide the bar the movie clip that i want to appear on the stage to duplicate/copy.
View 6 Replies
I am trying to increase the speed of a movie clip by using a slider. Can someone point me to some information on how to do this? I found this but am not sure my version is picking up the change in frame rate accurately
View 1 RepliesI am attempting to attach a slider bar to a movie clip. The movie clip is of a face morphing from emotion to no emotion. My ultimate goal is to have the viewer choose when the emotion has disappeared by moving the slider bar.
View 1 RepliesI am trying to add action script 2.0 to a slider that i created using http://www.kirupa.com/developer/mx/slider.htm that slides a movie clip that is a timeline from left to right. In the timeline are (i)More... buttons that will reveal more information. I just need to know how to integrate the timeline into the code using as2 to make it slide when the slider is dragged..
This is the action script that I have on the slider movie clip as stated in the above tutorial. But this is ALL the action script I have on EVERYTHING..... I know I need more to make it pan the timeline but I dont know how to do it.
[Code]...
I really could just use a good tutorial that shows me how to link the image that im sliding to the slider bar. When the slider is moved to the right... the image flows left.... toward the end of the timeline. When the slider is all the way right. The end of the timeline is shown. The timeline is bigger than the stage so the slider is on a line with years on it.
iam trying to bulid a slider which will change the alpha of another movie clip named light.how do i do this. here is the actionscript i have so far:
Code:
onClipEvent (load) {
top = _y;
[code]....
I am trying to design a very basic flash game. The basis of which is that there is a slider at the bottom and objects fall from the top and you have to avoid them. However, if the object lands on the slider, it also has to become part of the slider and so the area of the slider increases. I am unsure of how to code this last bit as the properties of the slider must change.
View 1 RepliesonClipEvent (load) {
MinX = 0;
MaxX = 200;
this._x=100;
FRAME = _root.p1;
}
[Code]...
p1 is the instance of the movie which I am trying to move with slider. When I apply above code on the handle of the slider with instance name 'handle' everything works perfect. Slider moves and so do the movie. Now instead when I bring the same code to the main timeline to do the same, onClipEvent does not work, it gives error. So I replaced it with the code written below. Now I can move the handle but movie is not moving.
[Code]...
I am trying to create a slider that will move a series of images in a movie clip based on the location of the slider. The problem I have is that when you click and drag the scroller it will move the images once but after that the images will not move. I am guessing that the problem is with my code. I want to move the _x of the images movie clip based on the _x of the slider. Here is the code I am using which is placed in frame one of the "timelineSlider" MC:
[Code]...
If it will help I can send the the original .FLA file by email as it is too large (225kb) to post on the forum.
I would like to know if there is a way to update the position of the thumb on the Slider component when a movie clip plays. Currently I have a movie clip symbol on my stage with the instance name ShapeMC. It has about 10 frames or animation and two actions. the first frame has a stop action as does the last frame. The actions are on their own layer, separate from the actual animation. I also have the slider component in my library, but it is only there so I can reference it through AS3. My AS3 instantiates a variable of type Slider. I then define the properties, like the width, hieght, thumb size, minimum, maximum, as well as enabling livedragging. I did this so the user can drag the slider and move through the Movie Clip symbol. I added a button that allows the user to click it and autoplay the Movie Clip symbol (ShapeMC). All that works. What I would like to do is when I hit the play button, I would like to see the thumb on the slider move along the slider as the Movie Clip symbol (ShapeMC) plays. So if the Movie Clip symbol reaches frame 5, the slider thumb show be seen as being half way through the tread. I tried putting the currentFrame into the .value property of the slider, but that didn't do anything. No errors, but it didn't move the thumb at all.
View 3 RepliesI have a menu bar as a movie clip and another movie clip acting as a slider. I want to on pressing a button on the Manu bar movie clip get the slider to slide across with easing. however I don't want the easing to be infinite so can't use a this._x*=.9 or some decimal < 1. Loop function only acts on the sinle fram so it too quick to see.
View 1 RepliesI used this tut to create a menu. [URL] And my question is; Can I make the slider to move after a movie clip symbols instead of button symbols? That way my menu would be animated.
View 1 RepliesI am pretty new to ActionScript 3 and Flash. I don't want my movie clip to play unless the person's mouse curser is on the movie clip for more than a second. If the person just runs their curser over the movie clips really quickly, then it should do nothing. It must be more than a second. How do I code that?
[Code]...
Scene1->MovieClip1->Image1(as a button)Scene1->MovieClip2->MovieClip3->MovieClip4->frame1Now I want to call frame1 from Img1 have a parent Scene1 common.How can I do this.I have tried
on(release){
_parent.MovieClip2.MovieClip3.MovieClip4.gotoAndPl ay("frame1");
}
[code].....
I'd like to build image slider like Nivo slider with Adobe Flash Builder.
i'd like to have image controls, image titles displayed above the image(like layers in flash). i'd like to read the data from xml.
i'd like to have nice transitions between images.
mayebe u can provide tutorial or source code.
Im able to link to a movieclip inside a movieclipUnfortunately one of the movieclips now are a scrollbar and scroll. Now the actionscript isnt working?cal.onPress = function() {gotoAndPlay(2);message1.contentMain.message.total = unit1;
View 17 RepliesI'm creating a small drag & drop activity, and I want to be able to check and see if the dragged movie clip is completely within the bounds of another movie clip (or at least in the bounds of a certain x/y zone on the main stage. I can't use dropTest because it returns true if any tiny bit of the movie clip overlaps with the dropTest movie clip.
I also thought of something that just checks the x/y coordinates of the dragged movie clip, but I'd need this to reflect a range of values rather than one coordinate. For instance, I'd want to return true if the movie clip's x is between 50-60 AND the y is between 50-60. I'm attaching a small graphic to illustrate in case my explanation isn't clear enough [URL]
I have created a flash website, each button is a movie clip with an invisible button over it containing the following script
on (rollOver) {
_root.mouse_over_profile_btn = true;
}
on (rollOut) {
[Code]....
each page is also a movie clip and on release of a button its played. the problem is that when i press another button to play another movie clip 'page' the old content is still there.
Is there a way of reversing the page transition i have used to bring out the movie clip and then bring in the next movie clip.
i am making a pacman game, and i need to know how to make it go to a certain scence when a movie clip collides with another movie clip.
View 2 RepliesThere is a bad gap in my knowledge with Event Dispatch and Event architecture, and this problem proves it. I've been getting nowhere on this problem for two days, I've posted everything to my Flash site. Go here, please: [URL] Click on "Flash Banners" The two thumbnails represent two different classes. Each class is identical. Both are "extends Movie Clip" classes. Tweeners of various types control the hover and click methods. URL Loaders load the thumnails which I then wrap in MC's and make them buttonMode = true, etc. Hover and click to load the Banners on the thumbnails.
I can't send an event from the Eagle movie clip or the T2D movie clip to tell the other to fade out. Both Banner classes are instantiated through a separate Base class. I'm sure this has to be an Event Dispatch from one MC to another and that it can't be done by the Base class. how I can send an Event or Event Dispatch and what the code structure is so one movie clip can in one class can tell the other movie clip in the other class to disappear while it's neighbour is playing. I'm happy to post code or explain / clarify anything that's not clear.
I've got a main timeline .swf file called "blank.swf" which contains nothing but two blank movie clips one called called "pproduct", the other called "ppalette". In the script frame of this main timeline I use the simple "Loader = new Loader();" method to load a URL of an .swf file into the "ppalette" movie clip. The "ppalette" movie clip contains several color chip buttons, each of which use the same Loader method above to load an external .swf into a clip. Here's what I want to do: let those color chip buttons, when the "blank.swf" file loads, be used to load an .swf movie into the "pproduct" clip on the main timeline. I'm wanting to be able to swap depths with various movie clips which will take out the movie which has the palette, but I want whatever that palette has loaded in the original "pproduct" clip to stay there.
[Code]...
it seems simple enough but i have no idea on how i could get a movie clip to slowly move to the coordinates of another existing movie clip
View 5 RepliesI created a movie clip which plays ok. But when it ends there is a slight jump, if you will, when it goes back to frame 1 to begin playing again. Does anyone know how to make the transition unnoticeable from the last frame of a movie clip to the first frame of a movie clip?
View 4 Repliesiam tring to make a new project , i just wants to know how to make a movie clip ( constant speed ) follows anther movie clip <--- "which can be moved by the user "
<<<>>>> i believe that this idea is good , that i records the X and Y postion of the User's movie clip and just make the other movie clip points at this postion and move toward it ,
how to make the other Movie clip (( which is a car ! .. so it have acceleration , speed , steering , etc )) go to this position or let us say try to??
Q1) The registration point of a created clip is top left - my question is how can I dynamically change it's registration point - say to center center?
(I am trying to attach a movie clip to a created clip and I wanted it to be centered inside the container - a related sub-question, how can I find the x-y coordinates of the attached movie clip within the created movie clip?)
Q2)When I tried to create two different movie clips, I found I had to create them at different depths, else the first would load and the second would not. Why would that be so? I'm on MX 2004 Pro.
I have a very simple problem but I can't find the very simple solution to it. I've create an animated menu with animated movie clips inside to work as buttons. All the main buttons work perfectely but I've got just on button with a sub-menu. On this sub-menu I've placed an invisible hitarea button in order to place some gotoAndStop action. The thing is, it seems to me like this submenu hitarea are underneath something else (even though is the seccond layers right about the actions layers). I've placed a simple trace action whenever the mouse rolls over this area but I get nothing... Am I doing something really wrong? I'm losing all my hair already.
View 2 Repliesi am trying to use the Tween class to change the size of movie clip to certain height.the code works for me but when resizing the parent, it effects the child.i tried the height and scaleY property for the thum, but does not work.
ActionScript Code:
import fl.transitions.Tween;
import fl.transitions.easing.*;
import fl.transitions.TweenEvent;
[code]....
I have made a number of Flash banners and I save them and everything is good but when I open them, some of the movie clips have reverted to a previous state. So I need to resize and redo thsoe movieclips. I make one banner and then save as new file and resize it. It is really annoying.. I am on P.C. and have all the current updates installed.
View 5 Replieshow to stop a single movie clip in flash and other movie clips still looping. I tried stop(); and myclipname.stop(); both are not working. I attached a simple file,
View 0 RepliesI have some (Eg. 10) Movie Clips on bottom of the Stage (aligned horizontally) with different sizes (different width & height). I want them to align vertically on middle of the stage with same gap (irrespective of their sizes) in between 2 Movie Clips. Is it possible using AS3 code?
View 3 RepliesI've imported 9 .mov files in my flash presentation. Each lasts for about a minute, and the language is english. I have translation of each video clip in Serbian language as .txt files. And now i need that text to go below the movie clip simultaneosly with the voice in movie clip. And for example when i press pause,the text stops,and when i resume it,the text goes again.
View 1 Replies
