[URL] Looks like MVC to me,but I'm not sure if that's the exact framework used. UPDATE Now I know it's using the Cairngorm framework,and I've downloaded all the source files,how can I generate a .swf file? UPDATE 2 How can I know the exact version of Cairngorm used?
View 3 Replieswhat's the size of the bootstrap code for cairngorm framework which is based on flex?
View 1 RepliesWhat is the use to event extend the cairngorm event in cairngorm framework.?
View 1 RepliesFrom what I understand a framework reduces complexity in areas that are common, like a log-in system. I use ASP.NET MVC at work and have done some work in Zend Framework but do not get how a framework helps with client side development. The reason ASP.NET MVC is used at work is for Unit Testing - does a Flex framework help with this too? why I should or should not use a framework with Flex?
View 4 RepliesI wish to do my project in mvc pattern. so I chose cairngorm framework and just read some of the document about this framework.But I cant understand deeply to do project using this framework. Have any methods or examples to study doing project in cairngorm framework??
View 1 RepliesI was wondering if Parsley framework is compatible for Flex Hero Mobile 4.5? I seem to get a warning saying it's not compatible.
View 2 RepliesI am not using FlexBuilder, I'm using the free Flex SDK with TextMate. I'm having some trouble figuring out what this FlexBuilder process actually does behind all the nice dialogs and things, so that I can do the same thing by tweaking whatever the relevant file is, but Googling just points me at similar instructions telling me to use FlexBuilder.
View 1 Replieswhich is the best flash swf file decompiler which will generate an fla file and actionscript code from an swf file
View 2 RepliesI have an actionscript file which is displaying a button. I want to remove the button from my display. So i need to make changes to the actionscript code and generate a new SWF file after doin the changes.
how to generate an SWF file from an actionscript file.
I'm using a compination of actionscript's getPixel and php's imagecreatetruecolor and imagesetpixel to generate a png image of an swf movie inside a browser. At the moment it will output a 72 dpi image at the same resolution as the swf movie, but I've been asked about the possibility of generating a 300 dpi image instead.
View 4 RepliesI'm working on Flash ActionScript.My Movie Load some data like photo, sounds and photo to the Movie Stage. Each of loaded MovieClip have own animation.Is it possible to generate (record) FLV or other Movie file from ActionScript with ActionScript?
View 3 RepliesI can create SWC files. I can create ASDOCs.
Is there any way of combining this in Flash IDE or FlashDevelop? I would like the ASDOCs to "live" in the SWC.
The bitmap resource, It's usually make the bitmap generate the SWF file ,and use Loader class to load into the application. I search some answers from google, find two ways to generate SWF File, one. use mxmlc tool. and another, use jsfl. I know we can embed the bitmap or swf file into As code. and use mxmlc command like this: the as file is Vip.as , and the code :
package
{
public class Vip
{
[Code]....
I don't know how to use mxmlc generate swf file . And no error when debug the code.
Another way is that use JSFL to generate SWF in flash cs5, But I don't know how to use this. Ah, very pain.
I am trying to generate XML file in Adobe Flex 4.6. This is my code.
public var prefsFile:File;
[Bindable] public var prefsXML:XML;
public var stream:FileStream;
[code].....
is there any sample on using array bitmapdata to record video from webcam and generate flash movieclip file? i want to record sound as well without using red5/flash streaming server
View 3 RepliesI can't seem to generate any output when including the "link-report" compiler commands in Flash Builder 4.5. I've tried several different syntaxes that I've seen online:
-linkreport filename.xml
-link-report=filename.xml
-link-report C:fullpathfilename.xml
-link_report filename.xml
But absolutely nothing gets created when I run, build, or debug the project. Other application settings perhaps? The project is relatively young and doesn't have many custom settings so I'm thinking it is maybe application or config related?
The site appears to be loading on some machines, and not on others I can't determine a common theme. In this instance, loading = Splash screen appears, user makes language selection, main site then pre-loads. On a successful load it gets to 100% and displays the website, on a failed load it stalls at 99%.
Tests currently show:
Primary test computer (with problem)
OS: Windows 7
Browsers:Chrome 12
Internet Explorer 8
Firefox 3.6.13
Flash version: Chrome: 10,3,181,35
Internet Explorer: 10,2,159,1 and 10,3,181,34
Firefox: 10,3,181,34
On other machines, it works with Flash versions:
Chrome, Flash version: 10,33,181,35
Internet Explorer, Flash version 10,3,181,34
Since these tests, I've also tried it on a number of other Mac/PC's and haven't found any problems. Steps I have taken so far to try and troubleshoot: Cleared Flash cache and browser cache on machine where site works, and also on machine where site doesn't work. There is a file that doesn't appear to be load (this is showed in Safari on Mac) - framework_3.1.0.2710.swz - initially I thought this to be the problem, but yet the site works on some machines still without this file.
I've been reading up on the Cairngorm architecture that Adobe recommends as best practice for devevloping RIA's in Flex.http:[url].....I recently purchased Flash CS3 and want to find a way to implement Cairngorm in my upcomming RIAs that will be built in Flash instead of Flex. I've created my own version of Cairngorm that uses almost all of the features and classes described in the Cairngorm architecture.
The biggest challenge for developing a Cairngorm architecture in Flash is that the architecturerelies heavily on Flex data binding to update the view when there are changes in the model. As far as I can find, there are no such capabilities built into AS3. This leaves me with a few not-so-desirable options.I could write my own data binding classes, or try to migrate the data binding classes from Flex.
each view class that can respond to changes in the model implements an "IBinded" interface that contains one function called modelUpdated. These classes register with a 'bind list' when they are instantiated, and any command that causes a change in the model also calls a function cycles through each registered view class, calling the 'modelUpdated' function to signify that the model has updated.This is a reasonable solution for a very simple application with very little model data, but as the application increases in complexity, it does not scale, because there is no way for a view class that is binded to an object in the model to know whether or not that object has changed - instead, EVERY view class that responds to changes in the model must check the current value of whatever objects they bind to and see if there has been an update.
How can I generate a swf file output from another swf file?
View 5 RepliesHow to generate mxml(flex code) from excel file.how to Create flex code from xls file.
View 1 RepliesI'm just beginning to learn to generate xml with actionscript here's what I have so far:
var xml:XML = <ErikPhotos> </ErikPhotos>; while (xml.photo.length() < 20){ var item:XML = <photo /> var photoIndex = xml.photo.length() + 10001;
item.@name =
[code].....
I wan to generate an xml file with AS 3.0[code]...
why do I get < and /> instead of chars < and >? What should I do to get < and > chars?
how put images and text to a new pdf file by flex? I think I should use an opensource to put images and text to pdf file but I don't still find it.
View 2 RepliesA friend of mine has a Flash Action script running on a LAMP server that currently reads an xml config file. He's asked me if it's possible to remove the xml file, and replace it somehow with a system (lets call it an 'auto xml generator') that intercepts the request to read that file and generates an output, so it appears to all intents and purposes as if the file still exists and contains the contents that has actually been returned from our auto xml generator'
View 3 Repliesit's possible to have a user generate a file (.txt is fine), using a flash module i created, and based on their answers to certain questions within my flash module, all created in flash cs3.
View 18 RepliesIs it possible to create a program using AS3 that would allow the user to download a copy of a dynamic, self generated video into an AVI, MOV or MP4 format?
View 1 RepliesI'm developing a small flash application which needs to generate a DXF file as an output. The flash app has other elements which the user can manipulate, eventually producing a simple 2D image. I need this image to be outputted for use with CAD software. I've found a few solutions which involve using PHP to create a PDF file from the SWF.
I can then use a file converter program to convert from PDF to DXF. But ideally I'd like to do it all within the SWF, or at least eliminate the file conversion step.
I am trying to generate a play list from my XML file. In the function videoList produces a list of url for specified node, the trace(vidSource) shows:
Top level: Our Services [URLs]
How can I loop thru these urls and pass them into my stream_ns.play(vidSource); ?
Code:
function videoList(categoryName:String, loadUrls:XMLList):void {
//trace(categoryName);
if (categoryName=="Our Services") {
trace("Top level:", categoryName);
for (var i:int = 0; i < loadUrls.length(); i++) {
[Code] .....
Feel a little stupid to ask this question. I have searched the forum for answers, but I havn't found any.I have a developer certificate from apple, and I need to convert it to a .p12 file.I double clicked the "developer_identity.cer" file and it gets imported into keychain access.The file does NOT show up in the "my certificates" or "keys" categori, but it is listed in the "certificates" categori.When trying to export I can not choose .p12 as format.
View 2 RepliesI would like create a application that can can create folders and short cuts to folders in the file system. The user will click a button and it will put a folder on there desktop that has short cuts to files like //server/folder1/folder2 Can you create a desktop shortcut with code in adobe air? How would you do that? How do you create a folder? I keep thinking this should be easy but i keep missing it.
View 2 Replies