I have an LCDS server sitting behind a corporate proxy/firewall. I need to use a configured HTTPProxyService on the LCDS server to make requests out to beyond the firewall (can't go directly from the client because of crossdomain.xml issues) How do I configure LCDS to use the corporate proxy on it's outbound requests?
View 2 Replies
I'm trying to find the IP address of a client when they make a particular LCDS service call. Understanding all the issues of getting a "real" IP address and privacy concerns and so on, it is possible to find the client's IP address?
View 3 RepliesI'm developing a Flex application using RobotLegs, LiveCycle DS & Java.I'm trying to implement an update function, using LCDS, but I'm running into some strange behaviour:This is the ActionScript code within a RobotLegs' execute command, used to perform the update:
var token:AsyncToken = services.requestService.commit(new Array(model.currentRequestDetail));
responder = new AsyncResponder(resultHandler, faultHandler, token);
[code].....
I have my stuff set up and everything works fine except for a very strange glitch.When I use the internal IP address (192.168.###.###) from a machine on the internal network, it works fine.When I use the external IP address (209.###.###.### which eventually maps to that internal IP address) from a machine out in the world, like at home or a hotel or a clients site, it works fine.But, when I use the external IP address from a machine on the internal network, everything works except the flv file doesn't stream. The HTML page displays, the swf player displays, but the flv file doesn't stream; the swf player displays the message "Connection Error. Please press Play to try again."
What could possibly make this happen? To me, it seems impossible. Could there be a setting in FMS that would cause this sort of thing? I very much doubt it is a firewall issue, because if it were, then the file wouldn't stream from outside the firewall.
I'm trying to create a Flex based internet application with an EJB layer in the server. This layer provides the XML used by the flex application. It uses the Cairngorm architecture.Currently, on an error I call the handler function defined in all the command files. How can I centralize this?My idea is to create a XML file that contains all the error messages and the types of error message eg:- Warning, Error etc. In the error handler, I will call the error handling function and pass a unique id which in turn will display the error message defined in the xml config file. Do I need to load this XML file in the Model layer of the application itself and store them as say global variables?
View 3 RepliesI use wamp server and Propel.I have written my service using Propel but when I want to connect the data returned from the service Flex cannot recognize the return type.This is the php code that I wrote
<?php
// Include the main Propel script
require_once 'C:/wamp/propel/runtime/lib/Propel.php';
[code].....
Just want to clear a very basic doubt am having for quite some time.
Is LCDS and FDS the same
What material did you use to learn Flex/Air itself, and with ColdFusion + BlazeDS/LCDS?
View 7 RepliesI've heard somewhere that LCDS is no longer baked in into CF9, and LCDS Express will be phased out, is that true?
If I were to start a new CF8.01 + LCDS Express 2.6 project, what are the risks? Should I abandon that plan and go for BlazeDS instead?
In my project, I use LCDS to define a holiday table which contain holidayId, countryCode and companyCode. LCDS generated all the getBy which are very handy. However, I need to get the records which are having countryCode = US AND companyCode = ABC. Surely I cannot use any of those generated getBy (each of them deals with a single field only). Can you suggest me how to modify the code in generated services (in my case, it is _Super_HolidayService.as) to handle multi-key data retrieval
View 1 RepliesI am experiencing a strange problem when I want to bind a service to a button or something else:
[Code]...
I can add the services to the Data Services panel but I have two strange things:
1) when I want to configure the return type he doesn't let me create a new ValueObject type, I only get the bottom datagrid which states: Properties returned by the operation: Property: country_Id, provence_Id, city_Id, id_cdpc, district_Id with the related values on the right side. Why can't I create a new data type on the top?
2) When I accept this and want to add the service call to a button (drag&drop) I get the following error: Error occurred while generating code. Make sure that there are no compiler eroors and try again after reopening the file. Componentn type services.cdpc.CDPC not found... (ps: When I perform a Test Operation everything seems to be ok, I get the expected output values)
I have a POJO which declares a collection of List<Long>.
We're currently sending an ArrayCollection of Number, and it's arriving at the client as an ArrayCollection, populated with IntegersGiven the issues with Type Erasure & generics I understand how this is happening. How do I fix it?
Unfortunately because of some internal limitations, the model cannot be changed. Ie - we can't use a subtype, and we can't implement IExternalizable.Are there other options for registering custom type converters in LCDS, other than IExternalizable? Alternatively, are there any annotations we can use that indicate the type to be used for a collection?
I'm trying to serialize an object which has an InputStream. I need it to arrive on the flex client as a ByteArray.
[Code]...
I've set breakpoints in this code, and I see it being called as expected. However when the object arrives on the client, the input stream is typed as Object, and it contains no properties. What am I doing wrong?
I'm trying to take advantage of 'Path Variables' (or Linked Resources), in my teams FlashBuilder4 project properties, so that its not such a bear to get a new project out of SVN, and up and running. I'm all done with that, except that I can't figure out what I'm supposed to do for the "Web application URL". It doesn't allow me to create a "Path Variable" for http:// type items, only files and folders. Short of saying that all developers need to configure their servers exactly thus, how can I configure this property so that individual team-members settings don't interfere with other team-members ?
View 2 Replieshow to configure OUTLOOK express to my flash menu/button.graphic/mc
View 2 RepliesI have configured FMS 4.0 to do RTMPS on port 443. To test it, I created a self-signed certificate and then imported the certificate as an authority in my browser (Firefox). I don't want to go and get a real certificate until I can verify that FMS is able to do what I want it to.I included the path to the certificate and the private key in Adaptor.xml in <install dir>/conf/_defaultRoot_/That's the only file I have modified.[code]In the NET_STATUS handler I always get the following error: NetConnection.Connect.CertificateUntrustedSigner.
View 1 RepliesI try to use Security.loadPolicyFile() and Flash Player goes on error because my firewall stop it. It's ok.
But, when I put the method into the Try{} Catch{} statement, I can not intercept the error.
[Code]...
I just wrote a P2P video chat similiar to the Cirrus example application on my web site. It works great, as long as both users manually open the ports required for RTMFP. Naturally this is a deal breaker for me - since no one will use it. What is the standard solution in this case? Should I publish the instructions of how to open the ports on different firewalls? Should I write a small batch file to be downloaded that programmatically opens the ports? Is there a different (commercial) tool that allows me to bypass it in any other way?
View 1 RepliesI'm new to Flash and AS3, but with the help of many examples I have managed to created a scripted movie using some time lapse photography. I load the images from an XML file and use an event listener to add each image as a child of a movie clip. As the number of children grew, it caused the frame rate to slow, so I figured out that I could remove them after they were viewed and just keep looping through the array.
This works great on the local machine and when served up from the web server behind the firewall. However, if I try to access the file from outside the firewall, it loads the first image or two very slowly (if at all) then hangs. I've performed a net stat from the server and noticed that it is opening an inordinate number of connections to the remote client on various client ports (from 6 to 60+).
[Code]...
recently been dealing with a problem where outsiders have been able to hijack our Windows 2003 server based Flash Media Server 4 default livestream access point and bounce pirated television content over it. Currently am running this on a campus network and thought I had it locked down so that all incoming port 1935 requests must originate from campus and outgoing streams are served everywhere. This is sort of working, but it is also stopping legitimate traffic from streaming video to off campus visitors. If anyone can shed a light on how to setup my firewall rules that would be great, as I am stumped. Here is the list of how I've setup the rules (not using our real IP's for protection):
Campus is a class B network, everything is based off of 123.123.X.X
Server sits on 123.123.1.2
Port/rulename Rule Local Port Local IP Remote IP Remote Port
Port 80 Allow TCP/UDP 80 ANY ANY ANY
Streaming out Allow TCP/UDP OUT 1935 ANY ANY ANY <--this rule is supposed to allow all
[code]....
I've tried swf verify but thats easy to circumvent, nor can I get the allowhttpdomains options to work properly as it wants real names and not IP numbers.
How can i settings crossdomain.xml my flex project.* this is my crossdomain.xml.
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<site-control permitted-cross-domain-policies="all"/>
[code].....
I've tried lots of different methods but my project send error message "Security error accessing url Unable to load WSDL. If currently online, please verify the URI and/or format of the WSDL [URL]"
put the file in different places
C:wampwwwMYPROJECTin-debugcrossdomain.xml
(my swf url : http://localhost/bin-debug/test.html checked http://localhost/bin-debug/crossdomain.xml its ok)
C:wampwwwcrossdomain.xml
I added the load line of the project
protected function application1_initializeHandler(event:FlexEvent):void
{
Security.loadPolicyFile("http://localhost/MYPROJECT/bin-debug/crossdomain.xml");
}
if flex server type select none everythings ok. but server type select PHP need crossdomain.xml how can i fix.
I am trying to access a .Net service which requires an authentication header. If WebService is used it works fine. But when it is accessed using HTTPService it throws error. The project is already done by somebody else using HTTPService. Now changing to webService requires some time since there needs to be modification in a lot of files.
Below is the SOAP envelop required by the service.
[Code]...
I'm looking to bone up my LCDS knowledge, but find that resources for anything beyond simple examples is lacking.
NIO configuration on LCDS
Configuring LCDS as an Edge server
Configuring LCDS in a cluster, and appropriate fail-over strategies
Advanced assemblers
Strategies for managing high-throughput applications
Advanced JMS integration
Is there some sort of configuration settings in FlashBuilder 4.5 where you can easily switch between webservice urls? Right now I have to delete and recreate the web service every time I switch from local to production and vice versa.
View 2 RepliesI have a grails application that will be rendering an html page into a pdf file and I have a flex application sitting on a server that is going to accept REST parameters and construct a graph based on the parameters (which will be formatted in JSON). What I want to do is make a call to the flex app with my parameters and have the flex app create the graph, render a JPEG of the graph, then send an image back to grails. In other words, I want to put an HTML img src=that will render the image directly to the page so that my PDF Plugin in grails will render it into the PDF.
View 1 RepliesIs it possible to develop flex/Air application as a service. The application doesn't require any GUI it should run as service in embedded Linux/Linux/Windows.
View 1 RepliesI have an iterator service that works fine already and returns a correctly structured values to my flex application through my Zend Amf server
$contacts = array();
mysql_connect( 'localhost', 'root', 'test' );
mysql_select_db( 'test' );
[code].....
determine what is preventing my web service from being called. We have a working application in production and the developer who wrote it has left. am trying to build it on my machine and I can see a web service call in fiddler being made with the URL "/Services.asmx/MethodName" (as a GET request).I have set my break point in the asmx web service and it is not being hit. All I get in the flex front end is a pop up with " The remote server failed to respond and may be offline. he web service is in the same application as the web app that hosts the SWF file.I have the cross domain policy file in place.
View 1 Repliesis it possible to stop a web service from executing?
I have a flex web application that searches clients with both full name and client id, when searching by name sometimes the usuer just types the last name and it takes a long time.
Since the app is used when clients are waiting in line, I would like to be able to stop the search and use their full name or id instead, and avoid waiting for the results and then having to search the user manually within the results.
I meant "web service" I actually meant mx.rpc.soap.mxml.WebService, I want to stop it from waiting for the result event and the fault event.
How can I use a .NET service object in an Adobe Flex application? Is it even possible? Do I have to use some third-party tool?
View 3 Replies
