I'm trying to get my Flash application to connect via socket to my server, so I need to set up a socket policy file server. It seems like there are various roll-your-own implementations floating around out there, but is there any kind of standard or best practice with what to use?
As an aside, it seems strange that Adobe imposes this restriction but doesn't make something readily available to support it.
Actionscript Socket Policy File Server Problems Has anyone been able to successfully implement a service to serve the required socket policy file to FlashPlayer?
[Code]...
Has anyone been able to successfully implement a service to serve the required socket policy file to FlashPlayer?I am running the Python implementation of the service provided by Adobe at
[URL]
and using the following policy file:
<?xml version="1.0" encoding="UTF-8"?>
<cross-domain-policy>
<site-control permitted-cross-domain-policies="master-only"/>
<allow-access-from domain="*" to-ports="*" secure="false"/>
</cross-domain-policy>
[code]....
I am attempting to setup a binary socket connection between flash running on my desktop and a Rabbit RCM3800 Microcontroller providing the server on my home network, which has no file system and has a very basic http server on it. Due to limitations of the microC I cannot run Java/Perl/Python or any other server on it other than setting up a server using its own native Dynamic C language (essentially manually opening and controlling sockets in C). I am able to successfully connect to a socket on port 3333 of the server and transfer information between the server and the .swf file when it is the sandbox type "local-trusted" (while I'm debugging in Flash).
Because of this I'm fairly certain the code to setup the socket between the server and flash works fine. My problem occurs when I try to run the .swf file as "local-with-network" (such as running it after publishing on my desktop) or "remote" (accessing the .swf file when it is located on the server) and it then requires a socket policy server to host a socket policy file on the server. On my server I have code setup such that whenever a socket opens on port 843 or port 3333 (my data port) and sends a stream of raw data containing the request <policy-file-request/>, the server writes back in ASCII the below code and closes the socket.
Code:
Select all<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "[URL]">
<cross-domain-policy>
<site-control permitted-cross-domain-policies="all"/>
<allow-access-from domain="*" to-ports="*" />
</cross-domain-policy>
[Code] .....
So for some reason flash times out while waiting for the socket policy file. I have tested sending the <policy-request-file/> over telnet, and have received the above policy file. I have also sniffed using wireshark and saw that my desktop sent the policy request and received the policy file. I am guessing that Flash times out because it is waiting for some kind of terminating character that states the end of the policy file, and to that end I have tried sending. Interestingly, instead of sending the policy file I have tried sending random data from the server to flash, and flash displayed the Warning: Ignoring policy file at (URL) due to incorrect syntax. Because I don't receive this warning when I send my policy file I don't think it is formatted incorrectly.
I have also tried using the below flash code to hold the socket request open indefinitely, but it also errors after 20seconds.
Code: Select allSecurity.loadPolicyFile("xmlsocket://192.168.1.59:843");
The .swf file will eventually reside on the server itself at 192.168.1.59/myProg.html. I have only tested the flash file remotely on the server a couple times, and in addition to the previous warnings/errors, I received the warning: SWF from (URL) may not connect to a socket in its own domain without a policy file.
how to make a policy file for a socket server made on java with a client made on as2.
View 21 RepliesI'm trying to evaluate whether Flex can access binary sockets. Seems that there's a class calles Socket (flex.net package). The requirement is that Flex will connect to a server serving binary data. It will then subscribe to data and receive the feed which it will interpret and display as a chart. I've never worked with Flex, my experience lies with Java, so everything is new to me. So I'm trying to quickly set something simple up. The Java server expects the following:
DataInputStream in = .....
byte cmd = in.readByte();
int size = in.readByte();
byte[] buf = new byte[size];
in.readFully(buf);
[Code] .....
After that - EOFException happens on the server and that's it. So the question is, am I approaching whole streaming data issue wrong when it comes to Flex? Am I sending the policy file wrong? Unfortunately, I can't seem to find a good solid example of how to do it. It seems to me that Flex can do binary Client-Server application, but I personally lack some basic knowledge when doing it. I'm using Flex 3.5 in IntelliJ IDEA IDE.
I have created a flex app that uses sockets. I published the flex app in a web application that runs on glassfish server. Now from that flex app i create a socket connection to a C# server and start sending/receiving data.The problem is that after i create the socket connection to C# server the flex app first checks the policy file, and after it get's it, it closes the socket, without keep the connection alive.[code] Now after i create the connection and it gets the policy from server it closes this socket, so to be able to use this connection i have to call again [code]After i do this, i can use normally the connection
View 1 RepliesI have 2 applications which I wrote in ActionScript 3.0 as client and C#.net as server. These are basic chat applications. Also I have a test website which is running under the same machine with chat server application.
Server application is listening 289 port, flash application connecting to server with domain and 289 port, it can talk with server during working on Flash. But when I put the flash in a html page, the socket connection is breaking after a while because of security reasons.
I know that is necessary to put a crossdomain.xml file on target website's root folder. The problem is here: Yes, there is a crossdomain.xml file like this:[URL]...
Basically I'm using Flash to connect to a Java server.Despite my Java application replying to the <policy-file-request/>, in the Flash debug log it lists (not sure about the order as there are lots):
Security Sandbox Violation *
Connection to 192.168.1.86:4049 halted
Warning: Timeout on
[code].....
Running my Flash app from localhost (in debug) I can connect/contact the socket server just fine. Note: It doesn't seem as though the server detects any 843 connection (e.g. the policy file port) this way. However, when I move the app to the server itself and run it from there (i.e. from the website), it will send the policy file, get a disconnect (as it should), and then try to execute the regular port stuff but doesn't read anything from Flash. It seems like my Flash app isn't writing to the port as it should, or something else is going wrong. I did also notice that Flash seems to be trying to send the policy-file-request twice.My process right now is like this:
1) Flash tries to connect to port 843. The server responds to its <policy-file-request/> with the policy file.
2) Flash reads it, disconnects from 843
3) Server gets graceful disconnect, then gets another connection on 843.
4) Just after that, the server gets a connection on 2188, but reads another <policy-file-request/>, so sends the policy file again.
5) At this point, Flash SHOULD simply write the string "Test" to the socket (that's in my connect handler). However, my server doesn't seem to read anything on the socket after the second <policy-file-request/>.[code]
I have an application that connects to a binary socket server running on port 2234. I use the python policy file server, which I downloaded from [URL], which runs on port 843. If the client app is trying to connect to a socket I can see that the server is receivng the request for a policy file and that it sends it to the client. However, in the client, I get a security sandbox error. How is this possible? And is it possible to check whether the client really received the policy file? BTW, here is my policy file:
<?xml version="1.0"?><!DOCTYPE cross-domain-policy SYSTEM "/xml/dtds/cross-domain-policy.dtd"><cross-domain-policy><allow-access-from domain="*" to-ports="*" /></cross-domain-policy>
In my Flash app, I'm connecting to my server like this:
Security.loadPolicyFile("xmlsocket://example.com:12860");
socket = new Socket("example.com", 12869);
socket.writeByte(...);
socket.flush();
At port 12860 I'm running a socket policy server, which (according to this document) correctly serves up my policy like this:
[Code]...
I get no security warnings, which I used to get before the policy server was in place. Still, the connection to port 12869 doesn't work. It's made (I can see with Wireshark and on the server), but no data is sent by Flash. It might be worth knowing that the SWF itself is served from example.com as well.
So, this is a copy of another post I made, but I get a sneaking suspicion I put the post in the wrong forum:[URL]..The summary:
The Socket class in flash player sometimes, for some users (across all sorts of OS and Browsers) will not ask for the policy file from port 843 first, but instead will go straight to the port of the outgoing request, which in this case is our game server, who doesn't really understand the request.
In every case so far the user *is* using the latest version of flash too, so it's not an issue without outdated policy methods, which would have been my first guess.For most people it works just fine, but I posted a log in the thread for one of the non-working players. It's pretty mysterious, and I haven't found a fix yet... though I'm going to experiment with some work arounds.
I'm trying to talk to a fully RESTful api of my own creation. The api is up and running but flash does not support PUT and DELETE, and does not recieve http status codes properly, plus a whole load of other issues with flashes anaemic http support.
To get around this I am trying to use as3httpclientlib. A 3rd party as3 http library, that uses socket connections to access the whole http protocol properly. It's a great library, unfortunately because it uses sockets flash requires implementation of the socket policy file, even though the access is all via port 80, the standard http port.
[URL]
This has given me a real headache. I can't implement the port 843 policy server as the documentation suggests because it's out of my ability level i feel. Also when the client is running it may be behind a corporate firewall that doesn't allow 843 access, so serving the policy file via the standard port seems the way forward. This is where I am stuck.
The policy file documentation says this shouldn't matter as if you cant access 843 because of your firewall you'll be unable to access non standard ports anyway, but I am accessing standard ports, only via sockets instead of URLLoader.
In the root of my server I have placed the following policy file:
Code:
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
[code]....
I have created a socket server on port 6666 because port 843 is in use on my mac.So when flash player request "policy-file-request" I return to it the cross domain xml, but I keep getting the security error that "cannot load data from".[code]As you see I receive the cross domain from the socket server.But I don't understand why flash player doesn't accept that?xmlsocket.connect("localhost", "6666");Does anybody have any idea why it throws that error "cannot load data from" ?
View 0 Repliesfor a long time I could easily make socket connections from my swf files tom simples java servers on various ports (swfs embeded from activex, for example). I used the simple python server policy file provided at this article to open the needed tcp ports to my flash applications.
[Code]...
Last time I worked with flash sockets I knew that a policy file is required only if the swf file is embedded in a different domain from the one where the socket connection is about to be made. Did newer version of flash player changed this, so now they'll alk for a policy file no matter what?
View 1 RepliesI'm starting a Flex app on a pretty big reporting engine and want to know how best to connect to a Postgres Database. I'd like to create a REST API architecture so I can use the service for more than just the Flex app(mobile possibly).These are my options I've found:
Datatype: either XML, JSON or AMF
Flex Service: HTTPService or WebService
Server(using PHP): ZendAMF, custom json_encode implementation, Zend_Rest_Server
I've got my views all mapped out, and the api functions designed. Basically what I need is advice on which Flex / back-end service combo to provide.
I'm working on a Flash/Facebook game. My swf and socket server are on different domains, so I have to use a socket policy file. According to Adobe, they have "filed with IANA, the Internet Assigned Numbers Authority, to reserve port 843 for the purposes of serving socket policy files." Unfortunately, my server has port 843 closed. I asked my server guy to open the port. Here's his reply:
[quote]One of the points Matt mentioned is even if we open that particular port how would you ensure the scores of people accessing this game from their schools, libraries or even people internal to OurCompany will have connectivity on the port. Let me explain, in order for traffic to flow on port 843 from the browser to the smart fox server, the users ISP also has to allow for that traffic to pass outbound from the users browser. It is possible that several users would not be able to run it, is that risk acceptable ?[/quote]
How common is it for ISPs to block port 843? I assumed that, since this is an Adobe standard, that ISPs would now have it open by default. What's the scoop?
I'm loading in profile images from both facebook and twitter into a flex application. Based on the answer from this question, I'm loading the domain policy from the redirected url. However, now I'm seeing this error: Error: [strict] Ignoring policy file at [URL] The crossdomain.xml file from that URL looks like this:
[Code]...
The error states that there is a missing Content-Type. How do I get around this? I, obviously, can't update facebook's files.
First off: This is not another question about how to load a policy file.I have an app in development that connects to a socket server, gets the policy file and works just dandy.when the socket server is down for whatever reason, I need to gracefully fallback to an alternative method of getting messages from the server (polling,
[Code]...
I want to test a simple PHP socket server with Flex, server seems to work fine when trying to test using telnet, but Flex doesn't display any responses, here's my code:[code]
View 4 RepliesI'm building a Flex application, which is going to perform many server requests (let's say, that almost all interactions require an update from server). At the moment I'm using remote procedure calls for it. But I was wondering if using a socket would be better. In other terms, is maybe better to keep the connection alive rather then performing many calls in sequence? For my demo app I only have 1 client. Is the number of clients connecting to the server a factor for this choice?
View 1 RepliesI'm using as3httpclientlib to post data to my web service, but I'm continually getting the following security violation. Does anyone know how to resolve this? My crossdomain.xml file is below the security violation notice. NOTE: I'm using apache to proxy requests to the web service, therefore the target url/port and the url/port serving the applet are the same -- [URL] Also, the rossdomain.xml file is located in the root of the web app which serves the applet rather the web service; however, since the requests are proxied the url for the file is [URL]
[Code]...
I am writing a online game with flex and java server and I have a big problem. In normal case, my game run smoothly but some time the clients can't receive the command from server. I found that if server send message too fast or client is doing something when server send message, the game client can't detect for a new message so my game is freeze. I only tested with 4 clients and I don't know what happen when thousands clients online in the same time. So terrible :(. In the game client, I use one EventDispatcher class to dispatch any command from the server. Do you have any solution to warranty that client must receive any message from server when the connection is still alive or server must know if client received the message or not. I use flex 3 with Socket (binary) and Java QuickServer.
View 1 RepliesI'm trying to create an app that multiple users would log into a server hosted over the local network. When testing the app in Flash Builder it connects, but when I run it on my phone it does not. I'm using XMLSocket like so:
[Code]....
i want to know how to send data using the AMF format from my flex AIR project to a socket written in Java. I am getting CorruptedStreamException when sending data using writeUTFBytes() methods. Has anyone experienced similar problems? Also can AMF be used only if i am using LCDS only?
private SimpleServer(int port)
{
System.out.println(">> Starting SimpleServer on port " + port);
[code].....
Ok, basically my Flex app will open up a socket and listen on it. My java program will write some string to this port.
My AS3 code is
private function onRecvClick():void
{
var host:String = "localhost";
[Code]....
While trying to write to the socket, i am getting this java.net.ConnectException: Connection refused: connect. Funny thing is that the socket in Flex doesn't seem to dispatch any events, is it normal for that to happen?
Is there a good place that has an overview of how Flex layout stuff is managed? I'm trying to create some user-resizeable "windows" in Flex, but I'm having some trouble getting the layout calculations for the contents correct. Right now I'm just trying to get a good understanding of how Flex calculates its layouts, but I haven't found any good overview documentation. For instance, looking just at the width value there are the following:
[Code]....
and the same set for height. What's the meaning of each of these? How is each used? Is there any way using those to calculate some preferred size of a component (like getPreferredSize() in java)?
In Flex 3, MX effects could be triggered like this:
<mx:Resize id="myEffect" />
<mx:Button mouseDownEffect="{myEffect}" />
In Flex 4, Spark effects are triggered like this:
protected function onClick(event:MouseEvent):void {
resizeEffect.end();
resizeEffect.play();[code]....
There might be small differences between mouseDown trigger and the click event, please ignore that, it's just an example.I'm not sure whether triggers would or would not work reliably for Spark effects. Maybe they would but I guess there is a reason why this possibility is not even mentioned in the official docs.