I'm having problems creating dynamic tabs here's my code:
mxml:
<s:TabBar x="1" y="1" height="32" width="100%" dataProvider="{tabHolder}" chromeColor="#EF8B01"/>
<mx:ViewStack x="2" y="34" id="tabHolder" width="100%" height="214" creationPolicy="all">
<s:NavigatorContent label="Home" width="100%" height="100%">
<mx:Image x="6" y="8" height="181" width="402"/>
[code]....
tab wasn't added, what is wrong?
I'm having problems creating dynamic tabs here's my code:
[Code]...
Suppose I have a ViewStack like this:
<mx:ViewStack id="s" left="5" right="5" bottom="5" top="0" width="100%" height="100%" creationPolicy="all" minHeight="0">
<mx:Repeater id="repeater" dataProvider="{dp}" height="100%" width="100%" minHeight="0">
<mx:Box id="bx" label="{repeater.currentItem.label}" width="100%" height="100%" minHeight="0">
<mx:Label minHeight="0" width="100%" height="100%" label="bob" />
</mx:Box></mx:Repeater></mx:ViewStack>
With a large number of items in the stack (each having a large number of panels, databinding, etc), this gets extremely slow. The Repeater seems to trigger creation of all children regardless of the creationPolicy of the viewStack itself.
I'm trying to create a wizard that will guide a user through a lot of individual containers I have built. I have a main page that has many checkboxes for the user, each checkbox ties to a container. What I would like to have happen is once a checkbox is clicked it makes that container visible, then the next and back buttons when clicked only go to the next visible container; thereby leaving off any containers from the wizard that were not checked on the main page.
View 1 RepliesI am building an app where the user can add tabs as needed. Each tab will have 4 panels insideit. I can't get my for loop to build the panels. It keeps erroring out.1) How do I create these with a loop and 2) I am wanting to put data from a data provider in here. How can I reference the panel in the vbox in the tab control in the future?
function addNewTab():void{
if(labelText.text!=""){
var newVbox:VBox=new VBox();
[code]....
I've been searching for the last couple days but can't seem to find a basic example of what I'm looking for. I'm developing a Flex 4.5 app and in it I have a viewstack of 2 components that use some of the same services. Currently the only way I can get the app to correctly use the web services is by defining 2 different web services that use the same PHP web service file. For example: I have an app, and within it I have a viewstack with tab navigation of 2 components: #1) retrieve a list of all Salary Employees, and #2) retrieve a list of all Contractors. Currently to get it working I am defining a UsersTableEmployees webservice within component #1 and a UsersTableContractors webservice within component #2, but they both point to the same PHP class, and only differ in the arugment value I pass to them. Ie, getUsers("employee") and getUsers ("contractors"). Of course this is not best practice.
Searching StackOverflow and Google gives me many results about ColdFusion and MVC (example What's the best way to share data between components in Flex?), but I'm still confused. Can anyone here point me to a basic example (even sample MVC) and source code of an app that uses Zend AMF and allows different components to call common web services?
I'm using a viewStack which have is property resizeToContent set to true. When I'm selecting a child higher than the viewStack, it's correctly resized, but when I'm selecting another child which is smaller, the viewStack isn't resized! What I want is that my viewStack get the height of the selectedChild each time.
though, the Adobe doc say :
If true, the ViewStack container automatically resizes to the size of its current child.
I've got a Flex 3 project.Does deep linking only work on viewStacks? (My project doesn't have any viewStacks). I'd like to use deeplinking based on what was selected in a comboBox. I'd like the user to be able to bookmark or use the back button based on what was selected in the comboBox.The comboBox selection determines which data is pulled from the database.Is this possible? I set-up deeplinking in another project, but it had viewStacks. And all of the deep linking examples that I've seen use viewStacks.
View 1 Repliesin main.mxml :
public function init():void
{
PopUpManager.createPopUp(this,login,true);
}
[Code]....
How can i selectchild of main.mxml's Viewstack from login.mxml ?
I have as good as finished a new project I'm working on now for a while, and I have this small problem coming up at the fine tuning.The area of concern is so I believe the ViewStack I'm using, but I'm not sure so here the details.I have several check boxes (4), and only one at all times can be selected to show off associated Radio Buttons as a Group of (6). No RBtn pre selected.With the selection of a check box I also make visible a new Radio Button Group of (4). No RBtn pre selected here either.Now if I select one of the RBtn (6 - each has a different Paper size measurement showing) then I can view through a external Xml data file details as Size, basePrice and the totalPrice which is in this case the same as the basePrice!
This totalPrice is located on the first Canvas/Label in the VStack!Selecting any of the first three (3) of the second RBtn Group (4) No RBtn pre selected either! - it will show me a Paper type description, and by selecting the fourth RBtn it will show me as well a field with the extra costs for a Canvas type, and it should select the second Canvas of the VStack with the totalPrice which is basePrice plus the extrasCost Canvas Price.Now the problem is that my second VStack Canvas/Label = totalPrice (basePrice +extraCost) is not showing up immediately! (It just shows blank canceling the basePrice out), and only if I select another of the six (6) RBtn! then it is showing the second vStack with the totalPrice (basePrice +extraCost). From here on everything works perfectly!I think that I have to mention that my RBtn Group are working in a function If / Else / If /Else configuration where both the Labels on both VStack Canvases are called up at the same time. So therefore both Labels should have data available which than should be viewed when the VStack changes?
I'm trying to figure out how to in as3 (not mxml) add views to a view stack.For example I have a view component like so[code]I've being trying to add it to a viewstack in the following way.[code]I'm aware I have to assign ID's but for now I just want to get the view in there
View 2 RepliesI want to know if I can use a tree and when and item in the tree is clicked the viewstack changes to that certain item?
View 1 RepliesMy Strucutre is like this.
<mx:ViewStack>
<mx:HBox>
<mx:Form>
[code]......
I have a ViewStack with 2 panels:
<mx:ViewStack id="viewstack1" height="243">
<mx:Panel id="gridPanel">
<mx:DataGrid id="grid" right="10" left="10" top="10" bottom="10" width="300" height="150" itemClick="showDetails(event)">
[Code]....
I want to have the user click a grid item in the first panel and then load the data in a panel in the second panel. I can grab the value of the index for the clicked item in the itemClicked handler, but how do I access the detailsPanel to set the values based on the row info from the Grid?
I want to add a component into a Viewstack dynamically in flex4. Like code below
[Code]....
But the code in comment doesn't play the effect. How can I implement it? Does the canvas have any hideffect or showeffect to Bind
Well the heading is basically what my question is:
How can I have different colors for different tabs in SuperTabNavigator.
Below is the code to my SuperTabNavigator with three tabs:
<containers:SuperTabNavigator x="0"
y="10"
width="100%"
[Code].....
I want to have different color for every different tab.
How should I do this.
I know there is a firstTabStyleName and lastTabStyleName: is there any way to have the secondTab or the middleTab
Im loading tabs for an accordion control at runtime. The number of tabs is determined by the role of the user. Each tab comes from a module so the load time is variable. As a result the list order changes every time the app is run.Is there a practical way to sort the tabs as each new tab is loaded?
View 1 RepliesI would like to have vertical tabs in Flex 4. I have started implementing this by having a vertical list down one side. On list selection I am updating the selection index of a view stack. This gives the functionality of vertical tabs.
My problem is the look and feel. How do I get the list to have a similar look and feel to the horizontal tab bar? Is it a case of overriding skins? I have found this post: Flex 4 vertical TabBar
which does implement vertical tabs. My problem with this is that I do not get any text in the tab. I think the problem is that this was originally written for flex 2. I am using flex 4 and am trying to put this component inside a
I am having a table at the backend, so when a query is asked at the frontend for an object, all the tabs in the front end should be populated with the details of the query object. I am able to pick the query object at the back end , but i dont know how to bind that object across all the tabs in flex. I am getting an error type coercion failed, cannot convert X to mx:Array collection
View 1 RepliesIn my flex project i used one option like Link button . If i like it will be open new page contain more information and components . Which container is suitable one ? Where is used viewstack and stages ?
View 2 RepliesWhat is the main difference Between ViewStack Container and Canvas?
View 1 RepliesI have a piece of software I'm working on that is using a viewstack with 3 canvases. With the change event I need to look for index 2 which is the last canvas when it changes to this canvas I need it to grab data from inputs from the previous two canvases.Within the viewstack events I've assigned the function change() to the event childIndexChange.
Here is the method:
private function change():void
{
[code].....
I have a viewstack with 3 items in it. Now my problem is that I want all these components to be of the same size. Its simply enough to do this manually but is there any other way of setting the size for all the components at once?
View 2 RepliesI have a viewstack with two tabs.In one of them there is a data grid shows a list of notes. The other one is includes a form that can edit notes or crates new note. I want the user to be able to add new note or edit existing note when clicks an item in data grid. I mean when user clicks an item the viewstack must become editor.
View 1 Replieshow I would pass a value to "SelectedChild" in ViewStack:
In the example below, I am trying to set a public property in a form called "register" after I have navigated there from another form called "login".
The result I get seems to be a compilation error:
Error: Access of possibly undefined property pagename through a reference
with static type mx.core:INavigatorContent.
vsMain.selectedChild.pagename = "register page";
[Code]....
I have a ViewStack, with a bunch of NavigatorContainers in. Each NavigatorContainer contains a different category of settings for the application.
I would like to be able to display a popup prompting the user if they try to leave the current NavigatorContainer without saving the changes they have made to the container's settings.
What would be ideal is something like the 'changing' event in the List component, whereby you are able to cancel or defer the event. Calling preventDefault() on the change event in ViewStack doesn't prevent the index change from happening.
I have been able to disable tabs in a tab bar using the following tutorial.
[URL]
This only works for mx tabbar. Does anyone know how to do this for a spark tabbar? I prefer the lnf of the spark one. When I try it with a spark tab bar it just disables the viewstack of the tab and not the actual tab. An alternative solution may just be to make the mx tab bar look like a spark toolbar with the rounded edges.
i am opening tabs with click event on tree list view. Problem is that i do not want open tab Pista as u can see in image again. i want to focus that open Pista tab.
View 1 RepliesIs there a way to set a common Backgroundcolor for all the tabs in a given TabBar? Rightnow I am able to set color only for selected tabs using
tabBar.getChildAt and setStyle
My problem: I have a tab navigator, with many forms in each tab. But I have a single global save button.Problem is, if I don't open a Tab, it doesn't get initialized and therefore the forms it contains do not exist..
How Can I make it as if the user had clicked on every tab?
