I cant pass the query string while using the debugger or else i cant debug when there is a query string. how to use the bothAm using a web application in flex using php for ex : [URL]
View 2 RepliesI have a Facebook application that has a picture gallery. It's build in Flex 4. I want to allow users to link to a specific image. How can that be done?
The only way I see this being done is adding a GET var like &my_picture=asd.jpg in the Facebook page URL, but I don't know how to read that from the iFrame.
How do you pass Query String in AS3 in FLASh CS4?
View 1 RepliesI've been searching ferociously and can't seem to find a solution that works for me. I am trying to pass variables via query string on a PHP page to Flash, and then have the swf add movie clips to the stage depending on the information it receives. Here is what the PHP outputs:
[Code]...
I am asking this question as a complete Flash novice, so please do point out if I'm doing anything wrong here (I suspect I am). I have a Flash MPU size animation with a link in it which has been created by using a full sized transparent layer as a button (is that the correct way) with the following ActionScript:
[Code]...
I am successfully Passing HTTP Query String to Flash Query String.
Resuming:
inside html
Code:
' <EMBED src="Film1.swf'+document.location.search+'"
'+
inside as3
[Code].....
Then Film1.swf can't grab no more the userName parameter.
I am successfully Passing HTTP Query String to Flash Query String.Resuming:inside html
HTML Code:
' <EMBED src="Film1.swf'+document.location.search+'"
'+
[code].....
I want to be able to do something like
var XMLquerry:String = "a1.a2.a3";
var parserVal:XML = parserMethod(XMLquerry);
// or
var parserVal:XMLList = parserMethod(XMLquerry);`
[Code]....
I am working on adding functionality to where the URL takes in a parameter as defined by an MVC style looking way.eg. (URL... )where 12345 is the corresponding Id number that I want to get.I have this functionality working.I am using Internet Explorer 7.My issue is that when a user attempts to enter a new query string id into the URL, the page doesn't refresh when the user hits enter or the refresh button. (The user can navigate to the url/#/Id/12345 only when opening a new window/tab)Does anyone know if this is a feature that doesn't work in Flex or if there is some code or configuration needed to allow this?
View 1 RepliesI really don't understand why this won't work? I've made a test which sends some POST data to a script on my page which works fine.[code]
View 14 RepliesError: Error #2101: The String passed to URLVariables.decode() must be a URL-encoded query string containing name/value pairs. at Error$/throwError() at flash.net::URLVariables/decode() at flash.net::URLVariables() at flash.net::URLLoader/onComplete()
[Code]...
I get following Error when trying to pass variables via URLRequestMethod.POST;
Error: Error #2101: The String passed to URLVariables.decode() must be a URL-encoded query string containing name/value pairs.
Is there a method for string URL Encoding?
I am trying to make a contact form. When I test the form, I get the following error message in the Output:
[Code]....
Error: Error #2101: The String passed to URLVariables.decode() must be a URL-encoded query string containing name/value pairs. at Error$/throwError() at flash.net::URLVariables/decode() at flash.net::URLVariables() at flash.net::URLLoader/onComplete() _____________________________________________________________________ ________________________________ stop(); var DepartVars:URLVariables = new URLVariables(); var DepartURL:URLRequest = new
[code]....
Error: Error #2101: The String passed to URLVariables.decode() must be a URL-encoded query string containing name/value pairs.
[Code]...
I'm not where error exactly the error happen so I post the whole thing. As far I know bottom code that relate to send_loc.php works fine, get_loc.php is having a problem. The output from get_loc.php is
[Code]...
I need to be able to pass some variables FROM flash and append it to the end of my address. I assumed that if I used LoadVars, I can append the vars to the end of the string like this:
ActionScript Code:
send_btn.onRelease = function ()
{
var my_lv:LoadVars = new LoadVars();
[Code].....
I'm trying to run a sqlite query in flex to count the total number of records I believe its working fine but I just can't figure out how to display the results - all I get back is [object Object].
private function overviewOne():void{
var stmt:SQLStatement = new SQLStatement();
stmt.sqlConnection = sqlConn;
stmt.text = "SELECT COUNT(user_id) FROM tbl_user WHERE status_status ='Away'";
[code]....
So how do I make a reference to the COUNT(user_id)?
(flash.data::SQLResult)#0
complete = true
data = (Array)#1
[code]....
I'm trying to pass a variable (an mp3 URL) generated from a SQL query with PHP to a small flash mp3 player embedded in the page. I am using FlashVars and its not receiving the .swf is not receiving the variable.
Here is the embed code:
[Code]...
i'm a newbie in Flex/Air. I'm developing an AIR web browser and i want to use a virtual keyboard to write in the HTML pages.it works well when i try to write in a text area, but i don't know how to write in the html page.EXAMPLE:To write in textarea, i just have to call this:textarea.text = event.keyLabel;
View 1 RepliesI want to pass variables to php, then the php runs a query from the mysql database, and then sends back the new variable... I looked for tutorial, but nothin' seemed to work.
[Code]....
I'm using Actionscript 2.0, and I'm trying to pass a query parameter in the url portion of MovieClipLoader.loadClip, e.g. mcLoader.loadClip("movie1.swf?param=1234", blahblah);
but got the error "URLNotfound". If I omit "?param=1234", then it works. I need to put clip loading inside a class definition, so when I tried to use MovieClip.loadMovie, I find difficult to correctly setup the event handlers "onClipEvent(load)" or even worse with "onLoad".
How to get query string from URL? The characters past the ? in IE. [URL]
View 1 RepliesHow to get the query string in AS2.0.
View 2 RepliesI've looked up quite a few tutorials, how-to's, etc. on how to pass a query string into my SWF, but it isn't working. The page where the SWF resides is an ASPX page, and this is the code I used:
Code:
Select all <object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="[URL]"
width="756" height="433" id="gallery" align="middle">
<param name="allowScriptAccess" value="sameDomain" />
<param name="allowFullScreen" value="false" />
<param name="movie" value="gallery.swf?ProjID=<%=Request.QueryString["ProjID"]%>" />
<param name="quality" value="high" />
[Code] .....
As you can see, it pulls the "ProjID" querystring and is supposed to pass it into Flash. I have executed the page and viewed the source to make sure it is pulling the querystring appropriately, as shown below:
Code:
Select all<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="[URL]"
width="756" height="433" id="gallery" align="middle">
<param name="allowScriptAccess" value="sameDomain" />
<param name="allowFullScreen" value="false" />
<param name="movie" value="gallery.swf?ProjID=1" />
[Code] .....
I used "1" for the value, and "1" was what is in the page source, so I know it's at least getting that far. As for what is in the ActionScript, here it is:
Code:
Select allvar myProj = root.loaderInfo.parameters.ProjID;
var myGalleryXML2 = new XML();
myGalleryXML2.ignoreWhite = true;
myGalleryXML2.load("[URL]"+myProj);
myGalleryXML2.onLoad = function(success) {
if(success){
_root.myImages = myGalleryXML2.firstChild.childNodes;
_root.myImagesTotal = myImages.length;
It is supposed to load XML from an ASPX page that builds the XML from a database depending on the project ID (ProjID). If I hardcode the variable to "1" (or whatever other ProjID), it works and the correct images are shown for the respective ID. However, I can not get it to pass the ID from the URL to the Flash file. I've even tried "_root.ProjID", and a QueryString class I found through Google, as well as passing the ProjID through Param tags as FlashVars with no luck.
I have an array of objects which uses a delimited string as the keys. When examined in the FB4 debugger, the keys look like this:[code]The first two items are numeric (cast to string) but the third item in the multi-part delimited key is naturally a string -- it's like an alphanumeric library shelf reference. As expected, when you click on the [+] icon in the debugger, you can view the object associated with that string key. So far so good.The debugger shows the keys in the (pre-sorted) order in which they were added to the array. However, when iterating the object array so:[code]the keys are returned in some other order --internal hash? My question is, how does the debugger know the order the keys were added in, and can I access that knowledge at runtime when iterating the array? I want to iterate the objects in the order in which they were added. Or do I need to maintain my own index of these keys showing the order they were added to the associative array?
View 1 RepliesI have a form that sends data to a results page. I would like the results to manipulate a SWF file through the actionscripts.
EXAMPLE:
Form uses 3 radio button submissions.
Upon SUBMIT it sends data to results page creating a string seen below
Results page receives data (form_record.php?Q1=Q1D&Q2=Q2D&Q3=Q3A)
Results page houses SWF
SWF uses the string to control the action of the Flash.
Can be a simple as if "Q1=Q1D&Q2=Q2D&Q3=Q3A" is recognized it does a gotoAndPlay
Im building this AIR app on Flash CS5, and I have this TileList that loads its data (images and names) from a database. I want to do a query with the name any item of the Tilelist when its clicked, so i need to send the name of that item to a PHP file that will execute the query. I am thinking of a function that loads the item name to a variable when the item is clicked. How can I send it to the PHP file and how would I load it to the query? The query I want on the php file goes something like this: Select lat, lon from mapdata where name=theVariable;
View 3 RepliesWhen we reference a SWF file from our ASP.NET page we append the version number to the SWF url, like App.swf?1.1.0.0. In a recent update, Firefox has continued to use a cached swf even when the version number changed, App.swf?1.2.0.0. We haven't noticed this behavior in other browsers.
Has anyone else seen this behavior? We don't want to disable caching completely. At this point we're probably going to change the name of the swf for each version, like App.1.2.0.0.swf, which seems a bit excessive.
how I could remove anything after a prefix in this string... [URL] so need to end up with [URL] The query string may change so need a way of telling it to remove anything after .flv
View 5 RepliesI need the simplest way to get the query string from the URL address.
Nothing with variables, only the string that comes after "?"[url]...