My problem is that the close button is going out of screen to somewhere after I made the gallery images fullscreen.It looked like this before they changed to fullscreen.. On right top corner you can see close and slideshow button etc...But after we made them fullsreen, the buttons are gone wide top right I guess. I can send the xml or .as files dont know which ones you need..
View 1 RepliesEverything I've read says they should be in the Options section of the tool bar when I have a brush selected. Well, they're not. And I can't put them there, even when I go in the Custimize Tools Panel. It's like the buttons do not exist in CS4. I did not have this issue in CS3.
why these buttons would not be showing up automatically along side the other brush modifers in the tool bar?
P.S. Adobe has been very difficult today. I haven't been able to chat with a rep, send in a iquiry because the function wasn't working, or get anyone on the phone.
I am trying to get the flash buttons for my website to work, but every time I do the getURL thing it keeps saying 'Cannot find(directory)'. The website is offline and I'm using Macromedia Flash MX 2004, I also might be able to use Flash 8 but these are the only two versions I have access to.The action script for the button is:
on(release){getURL("..********(Website directory)(sub directory)(Website page).html")}
I am making the website in Dreamweaver 8 and this is really holding me back as it's nearly finished but the buttons still don't work.
I must rejected all users outside Denmark from our live streaming (c-ip) and this is done in an access plug-insBut now I need to open up one of the streams, but I can't get the streaming name in the access-plug-ins only in the Auth-plug-ins.I cant use x-page-url or s-uri I need pStreamName. in access-plug-in like thissetStringField(m_pAev, IFmsAuthEvent::F_STREAM_NAME, pStreamName);but I cant get it inside the access-plug-in
View 1 RepliesI have a movie clip with 15 frames. Each frame has buttons on it (mc's)... I was going to put the actions on the main timeline/stage and navigate within the MC from the main timeline. Is that possible? I can get the buttons on the first frame of the MC to work, but I can't seem to figure out how to target/make the buttons on the other frames work? I was thinking I could identify the path of the MC with the frame labels, but that doesn't seem to work. like: _root.RMChanger.(frame label).buttonOnFrame = function
I have to move a text box in and out over the MC backgrounds on the main stage... which is why I was thinking to do it this way? I've been switching back and forth bwtween AS2.0 and 3.0
I am having trouble with a job I am doing at the moment which has an mc with buttons within it. I want it so that when I roll over the mc it tweens from a small version to a larger version, and on this mc there are some buttons. At the moment I can get the mc to move but the buttons remain inactive and also the rollover states on the buttons don't work. I have attached a simpler version of what I am trying to do to this post.
View 3 RepliesI'm working on a site and I have 2 movieClips/buttons that I would like to use as use as next frame/ previous frame triggers respectively. Is there a way to set the buttons up once and then access the functionality from the various levels of the site? Note that the prev/next buttons will not always be on the stage.
View 3 RepliesI am creating a navigation bar in Flash (which will then be used in Dreamweaver). When you mouse over each topic in menu (ex. Products), i want it play a movie clip (so it shoots out a sub-menu underneath). so far so good, but the only thing is, the sub-menu won't stay open in order for me to click on buttons in it. For each button, I assigned it the Behavior to go to a url. Also, I tested the buttons within the mc and they don't seem to direct me to url. do you think maybe it's because it's nested within the movie clip?? Is there an easier way to go about this?
[Code]....
im working on a zoom/pan gallery and i have a problem that i can't solve.URL...the pan buttons are not working but the zoom and reset buttons works. im working on movie the image using the mouse now, if you will hold the image and move it it will drag it on stage.the image is a loader the loads and image and placed on screen.there is a mask on top of it and a frame that indicates the size of the gallery.when the user pan the image loader content i want it to stop as soon as it gets to the gallery frame,but i cant seem to find the best way to do it.so basicly when the image is in 100% i dont want the user to be able to drag it but after you zoom the user will be able to drag it but only to the edge of the frame so there wont be any white spaces.i tried a lot of different ways to do it but all of them are complicated and not working the way that i want them to work.
View 2 RepliesI am using Flash CS4 with ActionScript 3 and I am fairly new at it. I am struggling with two things.
1. How can I start a movie clip while scrolling over a button? I know how to start a movie clip when a button is clicked.
2. How can I use multiple movie clips for seperate buttons?
[URL]
I'm trying to make a menu that has onRelease buttons on top of onRollover buttons (the onReleases are on a separate layer from the onRollovers). The onRelease buttons take the user to different urls, and the onRollover buttons are supposed to allow different parts of the menu to appear.
The onRelease buttons work fine, but I can't get the onRollover buttons to work consistently. Sometimes the onRollover buttons will correctly advance to a different frame, and sometimes they "stick" and do not advance. The script has no errors and I've tried changing the sizes of the onRollover buttons (in case they were too large and the cursor was hovering over more than 1 at the same time), changing the order of the code for the onRelease and onRollover commands (in case the onRollovers were being superseded by the onRelease commands), and countless variations of the layers and frames.
I'm sure that you'll want to see the script, but I don't think that pasting it all on this post would be reasonable? So I've put the .fla and the .swf on this page for reference: [URL]
I have 4 buttons , one container and one background movieClip as the attached file shows. Well.. at the Gallery movieclip displayList I add the other three BLACK buttons like this:
[Code]...
Everything I need consist on swap the buttons when i CLICK or ROLL_OVER those buttons, how do I do on thats circunstance? With a container and a background at the same displaylist.
I'm creating a menu system, the text buttons should, on rollover, move all buttons to the left (of the button currently rolled over) 100 pixels, in the gap created a sub menu running vertically will appear which will break into a 2nd horizontal submenu etc. I'm still in the early stages, and have hit a stumbling block, I placed a trace (this); cmd in root of the roll over function then again in each segement of the IF/ELSE loop inside that fuction. The trace CMD in the root of the rollover gives me the feed back _level0.btn1 or 2 or what ever button I have rolled over but the ones inside the IF/ELSE loop all say _level0.btn0 regardless of the button I roll over!
[Code]...
I have three buttons and when I click the second one, the first stops working (e.g. no trace event and it won't go back to the frame "tab1") but the third still works. Then when I press the third button both the first and second no longer work. If I take out the gotoAndStop lines, the buttons work fine. The subsequent frames simply have stops on them.
b1.addEventListener(MouseEvent.MOUSE_UP,b1Pressed);b2.addEventListener(MouseEvent.MOUSE_UP,b2Pressed);b3.addEventListener(MouseEvent.MOUSE_UP,b3Pressed);
function b1Pressed(event:MouseEvent){ trace("b1 pressed");
[Code]....
-Alright so I have made a next, and a prev button. That navigate the timeline inside an mc "tabs_mc." This mc ison the the main stage.-When the next and prev buttons are pressed they goto 1 of 4 frame labels on this timeline inside tabs_mc.-When one of these lables is reached an mc "thumbs" appears on the screen / stage.-These mc's "thumbs1, thumbs2, thumbs3, and thumbs4" contain buttons that SHOULD be clickable.-But are not after the prev, and next buttons are press. They are before the next, and prev button are press, but not after.
way this is or even better how to keep these buttons enabled after the next, prev buttons are clicked?I thought of making some sort of boolean to tell the each button that is needs to stay "true" after prev, and next are pressed.But I'm a beginner so I don't know where to start.Heres the next, and prev button code:
HTML Code:
//Button Listeners
/////next_mc.buttonMode = true;
[code].....
I'm having problems with the flash buttons on the flash website i made for a client. or some reason the buttons in the top and bottom menu work on some people's computers but on some they don't. I don't know what to do, i had this code for all the buttons,
on (release) {
getURL("http://legaldepartment.ca/","_self");
}
and they worked on my computer but on others the buttons didn't work at all so i added this code to each button also
on(press) {
_root.getURL("http://legaldepartment.ca/","self");
}
and they still work on my computer and some other people's computers but still some they don't work on some people's computers.
I got an error message, when trying to compile. At one point it was working, but maybe I screwed up one of the environment variables.
C:Documents and Settingsjm>mxmlc Error: could not find a JVM.
I have a SWF that works perfectly inside flash. once i export as SWF, it doesn't work anymore.
i can't use "trace"
i have tryed that function but it doesn't trigger it for some reason[code]...
how can I find the FPS of my SWF. It�s set to 12 but I can see that it�s not playing that.
View 1 RepliesI am making a banner with an animation (Image change into movie clip "3D Spiral") and added buttons but I cannot get the buttons to control the animation.
View 3 RepliesI have been using Flash since it was Flash 3 and AS2 for about 3 years now. I have never ever ever been a fan of buttons. I find them limiting and icky. I just moved to AS3 and OOP this week (it's about freakin time, I know). I am just wondering who here likes to use buttons and why? Is there a point to them? I mean, apparently with AS3, you just have to add "mc.buttonMode = true" and you are well on your way to having all the functionality you need without all the hassle or up states and all that.I am open to adopting new techniques and strategies if they are worthwhile so I am just curious as to what the community thinks. What are the pros and cons to using MovieClips as buttons instead of using an actual SimpleButton.
View 6 RepliesI've to do a presentation in flash. I need to create buttons that will interact with other buttons. An example:
I've an electronic circuit with 4switches (ON or OFF state). Each switch it's a button. I've to close 2 switches so that closes the circuit and then i want to show to where the current flows.
I'm trying to do something like this, but I think this isn't a good solution:
on (release) {
if(_root.btn1 == "btn1_on")
gotoAndStop(<number_of_a_frame>);
else
gotoAndStop(<another_frame_number>);
}
I think this is gonna take me an HUGE time to create all the possibilities. Because I can open the switch1 and close switch4, or open switch3 and close switch2... Do you know what i've mean?
I've got two different domains and both of them direct to the same website. This website has a menu on top made in Flash (the rest is HTML, so the page must be reloaded everytime I click on an option or I need new content).
But this Flash movie has to show a different animation depending on the URL.
What can I do to find out the current URL in ActionScript?
I have a fla that does a few things before loading in a .flv file and playing this. All this works fine, now comes the issue.
I have to find when the player stops.
I have tested around with cuepoints as well as many other options and found this code on these forums, where at least my flv file is played through, but the buffer throws an error[code]...
I have a number of different buttons which I have calledred, blue and green (instance name)I want a piece of code that recognises which of the button red, blue, yellow and green has been chosen.note these are buttons and not radiobuttons.
View 1 RepliesDoes anyone know the code to put to find out if a checkbox is checked or not. I need it to play a sound 99999 times if checked, and once if unchecked
EDIT: I need it to be checked when a button is pressed by using on(press)
I need to update the dynamic text in this flash file I have and export it to SWF. I've looked at the actionscript in all the frames and symbols but the only thing I've found so far are "stop();" 's
I tried exporting this to SWF to see if the file size was the same as the current working version on the site, and it was about 15kb smaller, and does not work at all.
How can I see all external file references in flash? I need to be able to tell my boss which files are needed or at least what is missing.
The only place where I used templet was in google, it was free, but not for commercial use, if someone know about a place where to find them, if they charge for one or for a year a don't know. and a good place.
View 1 RepliesI am trying to locate the letter at a certain number of characters after a word.For instance, in this sentence:"Hello, I really like dogs"I want to find the character of position 7 after the word "really", which in the above sentence would be the letter "d"
View 2 RepliesHow to find out whether camera is attached or not in AS3.0. It can be installed or not.