I am making this flash induction demo but i can't link the buttons to a new scene so the user can click on a button and see information relating to that topic.My flash skills are OK but dont use it often enough to keep my memory uptodate.
View 3 RepliesI am working on a project which is basically a virtual tour of a house. Each room I have made on seperate scenes, some rooms are on more than one scene (diff view points) and some room have a panoramic effect (these are the ones causing the problems). To accheive the panoramic scrolling I have made the room as a mC. Inside the mC I have buttons which should link to other scenes... 'enter the problem'. how do I link to another scene from in there? I have tried :
[Code]...
With the options I haev tried I keep getting different error mistakes and I can't really figure out whats wrong. I have been trying for a week and a half and I'm just not getting any positive results.
How would I link a swf to another swf's scene and frame?
View 2 Replieshow to link the button I made to say Scene 2 of my flash project. I'm not sure the actionscript required or where I put the action script.
Here is the file I'm using, trying to simply figure out how to make the open button go to scene 2. [URL]
So I have 3 buttons. One button links to an animation, the second button links to a different animation, and the third one shows the links. The first button works properly, but when I click on the second button, it goes back to the animation that is shown at the first button. How do I fix this? Here is my code for the first button:
button2.addEventListener(MouseEvent.MOUSE_DOWN,mou seDownHandler);
function mouseDownHandler1(event:MouseEvent):void {
gotoAndPlay(1, "random");
}
I have made sure that the button's instance name is button2, and that the scene name is "random".
Here is my code for the second button:
button3.addEventListener(MouseEvent.MOUSE_DOWN,mou seDownHandler);
function mouseDownHandler2(event:MouseEvent):void {
gotoAndPlay(1, "random1");
}
I've converted a graphic that i imported into a button. And put this action script on it to go to a certain scene.
on (press) {
gotoAndPlay("2,1");
}
This button should make the movie go to scene 2, frame 1, but its just not workinBackground info:The first scene is jsut a short intro where a couple buttons finally come up in a keyframe. In the keyframe itself, I have a stop action so the main scene doesnt loop. And on each button I have the action that i wrote above, to go to certain scenes depending on which button i click. Am i totally setting this up wrong structurally? Do i need to put any kind of "Reset" action if i want to go back to a previous scene. Also, in each scene, I have a mouse hide and replace action, could this have anything to do with it?
I am trying to link to scene two. Action script three. from what I have read this is the code needed, doesn't work though
[Code]...
I do have a mc with a dynamic text box in it, this dynamic text box is linked to an texternal text file where I have the text I wanted to be shown in my mc when I publish the movie.
When you see the text in the movie I want to be able to use part of the text as a button to redirect the timeline to another scene and exact frame. For the moment I try everything I could but no luck.
This is the script I have in the text file for the monent and is redirecting to frame 11 in the same mc.
myHTMLdata=<p><font color="#999999">.................................. .................................................. .............................................</font></p><p><i><a href='asfunction:gotoAndPlay,11'>Tower Ultramort</a>
My question is what is missing in my script if a want to link the text Tower Ultramort to and scene call spultramort frame 11.
This is very important because I do have the website with dynamic text boxes all over it and I need to link them to different scenes.
Here is the link for the website: [URL]
I've got a dropdown menu in which i need to link to another scene on my site. The actionscript on the button i'm using is working if i put the link on the button on the main timeline, but when i nest the button inside the movieclip dropdown menu the actionscript on the button doesn't seem to work.url...The dropdown menu is on the left side, (actually a drop right menu,lol).And, also, the rest of the site still needs a lot of work so please don't comment on that.
View 14 RepliesI am working on a project which is basically a virtual tour of a house. Each room I have made on separate scenes, some rooms are on more than one scene (diff view points) and some room have a panoramic effect (these are the ones causing the problems). To achieve the panoramic scrolling I have made the room as a mC. Inside the mC I have buttons which should link to other scenes... 'enter the problem'. How do I link to another scene from in there? I have tried :
Code:
on (press){
gotoAndPlay("SceneName",frame);
}
and this
Code:
on(press){
gotoAndPlay(this."sceneName",frame);
}
[Code] ......
I have a text input that will link to a given basic frame, but I want it to link to a specific frame inside a Movie Clip. Code for going to basic frame is below:
ActionScript Code:
stop();
if (Key.isDown(Key.ENTER)){
if (textinput.text == "word"){
gotoAndStop(2);
}}
ive made a button in the scene 1 which i have managed to navigate to scene 2 but when i click the button it goes to scene 2 but displays everthing that is in scene 1 in scene 2, how can sort this out so upon the button click in scene 1 it goes to scene 2 and only display content in scene2.
[Code]...
Check out this code:
[CODE]...
everything here is fine. It opens finely. But... i want to pass parameters where if i click a button in html page My.swf should open a particular scene called 'Scene 2' rather than scene 1. i tried
[CODE]...
the project im working on is all database driven, there are no html files and all coding that is created is made by php then stored within a db to be called later on. now because of this i can't use relative links at all with anything i.e. images, videos and swf files.
so.....i am using swfobject to link to a swf file using absolute linking as shown in the coding below. but what i need to do now is link an .as file in my swf using absolute linking so i can call some arrays from the file.i have doubled checked to make sure my vars can be passed by local testing and it works but now i need it as absolute....is this possible?
so I have some buttons that, as of right now, simply trigger the scene to move on while at the same time killing some particle effect animations I have spawning when the animation is idle. What I now need to do is make these events move on to a specific scene AFTER the rest of the scene's animation has played out (about 400 more frames) I'm figuring that the gotoAndPlay command has to be tied to some sort of timer variable that I would have to figure out based on my fps. Or maybe there is a way to set up a timer directly tied to a certain amount of frames allowed to go by. I'm pretty noob at actionscript, so keep that in mind. Here is the script at the point where the animation pauses to await user input on the buttons:
[Code]....
No..not that type of parenting ;DOK,I have a main scene, then sitting in the root scene I have 2 movie clips.1)centro2)fotoIn the first movie "centro" there is a menu btnI want this menu btn to call up mclarge + its frame (1) thats housed 3 levels inside the foto mc in root.
Main scene - (1) centro (banner which houses menu btn)
(2) foto_mc
- Main_boy_mc (<---works if menu btn houses in here)
[code].....
I have a movie with 4 or 5 scenes. How can i make the movie jump from scene 1 to another scene by clicking on a button?
View 5 RepliesArgumentError: Error #2109: Frame label null not found in scene Scene 1. at flash.display::MovieClip/gotoAndPlay() at intro_fla::MainTimeline/intro_fla::frame606()[intro_fla.MainTimeline: :frame606:3]
View 3 RepliesI'm trying break down a large Flash project into smaller swf's using a Loader :
stop();
var reqA:URLRequest = new URLRequest("New_Inro.swf");var loaderA:Loader = new Loader();
function imageLoadedA(event:Event):void { addChild(loaderA);} loaderA.contentLoaderInfo.addEventListener(Event.COMPLETE, imageLoadedA);loaderA.load(reqA);
Some of these swf files are animations which have code that states :
MovieClip(parent).gotoAndStop("frameThree");
The first loader works but I cannot get that swf to move on to the next frame(frameThree) to load the next swf file
Instead I get this message
ArgumentError: Error #2109: Frame label frameThree not found in scene Scene 1. at flash.display::MovieClip/gotoAndStop() at New_Inro_fla::MainGuy_1/frame146()[New_Inro_fla.MainGuy_1::frame146:2 ]
I'm getting this error in the OUTPUT window, when I PREVIEW (COMMAND + RETURN) my SWF:
ArgumentError: Error #2109: Frame label nGallery_btn not found in scene Scene 1.
at flash.display::MovieClip/gotoAndStop()
at BrookBrovazMusic004_fla::MainTimeline/pageSelect()
- The funny thing is that the SWF works the way I want it to. You can view it here: http://brookbrovaz.com
- I just don't like the idea that something's wrong, according to the OUTPUT window anyway.
[Code]...
the error is:
ArgumentError: Error #2109: Frame label instance121 not found in scene Scene 1.
at flash.display::MovieClip/gotoAndStop()
at Untitled_fla::MainTimeline/goLabel()
this is my code:
stop();
function goLabel(e:MouseEvent):void
{
[code]....
i am using a movie clip button to open a swf with a loader. hope i m not missing any information/other coding....
I've created a class which simulates an action for example a ball bouncing about a screen thus I'd create it like so:
Code:
var Ball1:ball = new ball(x,y);
How would I go about adding this to a loop, in a sense of every frame add another ball till you reach the maximum balls
currently after looking in help, google and forums this is all I could find
Code:
var ["Ball"+currentball]:ball = new ball(x,y);
but this doesn't seem to work and just causes
"**Error** Scene=Scene 1, layer=balls, frame=1:Line 15: Identifier expected"
I have created a new Flash file using A3.It has a menu system which all works, I have included trace code that outputs button pressed.So the next step is when the right button is clicked it takes them to the next scene. Please note I have coded it in AS3. When I compile it returns no error however at run time when I click on the buttomit returns the following error:
Menu 1, button 1
ArgumentError: Error #2109: Frame label contact not found in scene Scene 1.
at flash.display::MovieClip/gotoAndStop()
at menuformason_fla::MainTimeline/itemButtons()
[code]....
The code below works fine in CS3. But I get the following code when I try to run it in CS4:
ArgumentError: Error #2108: Scene Scene 2 was not found.
at flash.display::MovieClip/gotoAndStop()
at
introActionscriptWorkFile_Scene1_fla::MainTimeline/gotoScene2()
Here is the code: (Note: "scene2Frame1" is a frame label).
When I place a FLVPlayback Object on scene 3 I get the following errorTypeError: Error #1009: Cannot access a property or method of a null object reference.atUntitled_fla::MainTimeline/__setProp_flv_promo1_Scene3_Layer1_0()atUntitled_fla::MainTimeline/frame1()
View 11 RepliesI have an eventListener on a particular movieClip that triggers the timeline to play when clicked. This should play through a short tween, then hit another piece of actionscript in the last frame of that scene, which should take you to the next scene. I also have an audio file loaded into a soundChannel, as well as a few timers that operate a click prompt over the movieClip already mentioned. My bug is that if you click on said movieClip before the soundChannel is finished playing, all functions properly. However, if you wait for the sound to finish, this initiates a few timers that cause a prompt to fade in, telling you to click on the movieClip. If you click on it, still, everything works fine. But once the timers complete their work, and the click prompt fades back out, the tweens do not operate properly. If you then click on the movieClip, the timeline seems to play doubletime until coming to a stop() action in the next scene.
[URL]
jumping from from scene to scene once the play head reaches the end in AS3? Scenes do not play one after another like they used to. Below is some code I found that works with errors, however I'm not using a MC like the code displays "mc1". Not really sure on how the MC fits in? import flash.display.Scene; var scene:Scene = mc1.currentScene;trace(scene.name + ": " + scene.numFrames + " frames");
View 4 RepliesI believe I'm not alone in this problem but I don't see any answers in any of the forums.I have a movie clip that has a button that I wish to take me and play my first scene at frame 1.I labeled my the 1st frame "startLabel" and my scene is named "mainScene", and that's where I want to go from my "button" that is placed in my "movie clip symbol scene".
[Code]...
I made a scene with movement and everything, but when I convert it to a symbol I lose the movement frames. I want to be able to import it as an object so that the animation loops for as long as I need it to in the other project.
View 1 Repliesis at all possible to load a movie at a particular scene rather than it launching into the first scene automatically? Or is this impossible?
View 1 Replies