ActionScript 2.0 :: Make The Movie Jump From Scene 1 To Another Scene By Clicking On A Button?
Apr 17, 2004I have a movie with 4 or 5 scenes. How can i make the movie jump from scene 1 to another scene by clicking on a button?
View 5 RepliesI have a movie with 4 or 5 scenes. How can i make the movie jump from scene 1 to another scene by clicking on a button?
View 5 Repliesive made a button in the scene 1 which i have managed to navigate to scene 2 but when i click the button it goes to scene 2 but displays everthing that is in scene 1 in scene 2, how can sort this out so upon the button click in scene 1 it goes to scene 2 and only display content in scene2.
[Code]...
I'm making a Jeopardy game. When someone clicks on the button with the dollar amount on it, I have it reset to a different scene on the button so the players know it has been used. When another button is clicked, the first button resets back to its original dollar amount, rather than the blank scene it was reset to.
View 10 RepliesI am making an online portfolio and I have created the following scenes:homeaboutontactright now, I have three movie clips on the home screen that I have created into buttons.
on (press) {
go to Scene 2, frame 25 ?????????????????????
}
What I would like to do is after someone clicks on the button, it should then jump to another scene's specific frame number. So for example when you press the "about" button, the playhead goes to the "about" scene to 25th frame. Same thing for each button
I made movie, which has TWO Scene. In Scene 1 I placed link in 4th level of the movie like
Main Movie >
sub movie 1 >
sub movie 2 >
sub movie 3 >
sub movie 4 > (here is the link on movie)
Now I want to jump on Scene 2 frame 1. How can I do this?
I'm using Adobe Flash CS4 and ActionScript 2, And I need to go to the next scene buy clicking on a button. Instead it stays in the same scene. And this is the code I use:
on(release) {
gotoAndPlay("Scene 2",1)
}
How do you make a button change the scene of the movie? I simply need to make a button change my movie to a different scene
View 5 RepliesI have a movie clip on a scene with a button inside. How can I make this button to go to play frames on the scene but not inside the movie clip in AS3.0?
View 7 RepliesI'm getting this error in the OUTPUT window, when I PREVIEW (COMMAND + RETURN) my SWF:
ArgumentError: Error #2109: Frame label nGallery_btn not found in scene Scene 1.
at flash.display::MovieClip/gotoAndStop()
at BrookBrovazMusic004_fla::MainTimeline/pageSelect()
- The funny thing is that the SWF works the way I want it to. You can view it here: http://brookbrovaz.com
- I just don't like the idea that something's wrong, according to the OUTPUT window anyway.
[Code]...
Check out this code:
[CODE]...
everything here is fine. It opens finely. But... i want to pass parameters where if i click a button in html page My.swf should open a particular scene called 'Scene 2' rather than scene 1. i tried
[CODE]...
No..not that type of parenting ;DOK,I have a main scene, then sitting in the root scene I have 2 movie clips.1)centro2)fotoIn the first movie "centro" there is a menu btnI want this menu btn to call up mclarge + its frame (1) thats housed 3 levels inside the foto mc in root.
Main scene - (1) centro (banner which houses menu btn)
(2) foto_mc
- Main_boy_mc (<---works if menu btn houses in here)
[code].....
I believe I'm not alone in this problem but I don't see any answers in any of the forums.I have a movie clip that has a button that I wish to take me and play my first scene at frame 1.I labeled my the 1st frame "startLabel" and my scene is named "mainScene", and that's where I want to go from my "button" that is placed in my "movie clip symbol scene".
[Code]...
is at all possible to load a movie at a particular scene rather than it launching into the first scene automatically? Or is this impossible?
View 1 RepliesI have four scenes, it loads on the first scene. I click the button which sould go to scene four but it goes to scene 2.
View 2 RepliesI can get by and make nice flash sites, but I'm still learning what goes where and am still borrowing code to get by.I've laid the problem out in some detail as I am sure that will save a lot of questions later on, but feel free to ask if you want more info.Problem is as follows: I've built a two scene flash site using open source code for the preloader scene:[code]The main scrolling menu scene works great when it's a one scene movie and the preloader code works fine with a load of other sites I've built, but when I put them together on this site (the code for the scrolling menu precludes the addition of a preloader directly into that scene so separate scenes are a necessity) everything goes to pot.When testing the site (both as a standalone SWF file and when embedded in an HTML file) the preloader works fine and the main scene appears correctly, but when you click on any button to move back or forth along the menu/timeline it jumps and jerks along very roughly and stops short of its designated point.
This causes the whole scene to fail as the designated timeframe for each button contains a movie instance that won't function until the specific timeframe is reached.It's odd behavior and I'm stumped as both chunks of code work fine separately.I've even tried a much simpler preloader that doesn't display percentage or anything, it just cycles between frame one and two until the movie loads and then plays it (just like this one, but with no bells or whistles).Unfortunately my lack of actionscript knowledge prevents me from even finding a simple term to sum up the problem so I've failed to find any similar issues on any forums or Google.
i'm new on flash proffecional cs5 and i have made two scnes and i will link a few words from scne 1 to sne 2. If i select words will come a question to what i will link that words and i think that that only is for a url from the web. Q:How to link a few words from scne 1 to sne 2?
View 3 Replieshow can i load a movie scene per scene.I dont want to load the hole movie at the beginning
View 1 RepliesI have a movie clip with a button, clicking on it goes to another scene. When in the other scene, i want to be able to click another button and go back to the original scene and have the movie clip be at the frame where I left it, or any other that I specify.
View 2 RepliesI have a movieclip in my main scene. Inside the movieclip, there's a button. I wanted to so if I click on the button, it takes me out of the movieclip's timeline and play on the main scene's timeline. I tried gotoAndPlay("Scene 1", 1), but it just take my back to the first frame of the movieclip, not first frame of the main scene (scene 1)
View 4 Replieswhat the script to jump to another Scene, randomly... im using AS2
View 9 RepliesI am making a small website out of flash and I have a photo gallery in a separate scene. I have five photo galleries and so I have five buttons that will lead to those five galleries.
The code of one of the five buttons is
on (release) {
_root.gotoAndPlay("Content_Photography");
}
Works great, but the first 10 frames of this new scene "Content_Photography" is an intro and then I would like that it would jump to the corresponding gallery that these galleries will be laid out on the timeline.
What would i put after _root.gotoAndPlay("Content_Photography");?
When I click a button, it opens a window with buttons in it..My aim is, after an amount of time, I want it to dissappear...I want to accomplish it by setting a counter ...for example... When I click to a button 1
{
when click "button1"
jump to "scene1"; set counter=0;
[code].....
I've been doing an active net connection checking for my project, once it loads it should jump to my other scene which contains datagrid populated by an xml(php) from a mysql server, but when i run it the data grid remains empty. I've tried it before with out the jumping to another scene and the datagrid is ok..
View 0 RepliesI know how to make a button and all.. but what do I do to make it go to the next scene?
scene 1: Startsidan
scene 2: Sidan
I made a frontpage and when I click on the picture I want it to go to scene 2, where it enters the inside.the button is called PortalenKnappen, I want to be able to just press on it and it will go to the "sidan(scene 2)" that's empty at the moment.what would I have to write? I've tried "portalenKnappen.onPress nextScene("sidan", 1"); but it doesn't work.
I'm trying to link a button to the next scene. But the problem is that I can't give an action to the button in the scene, because in the action panel appears: 'Current selection cannot have actions applied to it.' So I have to make a framelabel I guess but doesn't work eather, what's the next step?
View 4 RepliesWhat is the command to jump to the last frame of the previous scene.E.g.: I have three scenes: sceneA, sceneB and sceneC. An element of the last frame of each scene links to sceneZ. Now I want a button in sceneZ that links either to sceneA, sceneB or sceneC depending on where I came from. prevScene() or prevFrame() doesn't work. I jump to another Scene and I don't know why.
View 8 RepliesI am trying to jump from one scene called main to other named tutorial 1-6 here is my code to jump to tutorial 2 as an example
on (release) {
_root.gotoAndPlay("Tutorial2");
}
I've tried every variation that I can think of, no _root gotoAndStop and also putting in _root.gotoAndStop("Tutorial 2", 1);
i dont know if it makes a difference but the navigation buttons are on a movie clip which pops up over the main stage...if that makes sense, that flash file is huge i didnt want to attach the whole thing...
Im guessing this is linked to actionscript,Ive made 2 buttons, One named Home, And another Exit,When home is clicked i want it to open a certain scene in this case called S Home,And when exit is clicked i want it to open the scene S Exit,How to do this?I will explain my problem more if needed,You could maybe call this linking a button,Only it opens a new scene rather than .html or an website
View 7 RepliesI Want to have a button info_btn. Now i know how to make a button and link it to a scene/frame.
But what im asking is, i want the button to display something (text field or movieclip(doesn't matter )) but I do not want it to go to another scene or frame if you know what i mean ? i want it to display there and then on the same scene and frame with a button to close it.. Is this possible?
how do you make a button use the gotoandplay action to go to another scene? Its scene 420 i need to get to
View 3 Replies