Im guessing this is linked to actionscript,Ive made 2 buttons, One named Home, And another Exit,When home is clicked i want it to open a certain scene in this case called S Home,And when exit is clicked i want it to open the scene S Exit,How to do this?I will explain my problem more if needed,You could maybe call this linking a button,Only it opens a new scene rather than .html or an website
View 7 Repliesive made a button in the scene 1 which i have managed to navigate to scene 2 but when i click the button it goes to scene 2 but displays everthing that is in scene 1 in scene 2, how can sort this out so upon the button click in scene 1 it goes to scene 2 and only display content in scene2.
[Code]...
I want to make a button, when clicked, open a blank email in outlook express to an email, with a subject.i take it you would use:[code] just wanted to show you what i meant! that was just a random stab.
View 3 RepliesI have a movie with 4 or 5 scenes. How can i make the movie jump from scene 1 to another scene by clicking on a button?
View 5 RepliesCheck out this code:
[CODE]...
everything here is fine. It opens finely. But... i want to pass parameters where if i click a button in html page My.swf should open a particular scene called 'Scene 2' rather than scene 1. i tried
[CODE]...
on the attached fla I have an "invisible" button (button with 0 alpha). I copied a script from the tutes section that will allow me to open a new window when the button is clicked (another rip from a forum question). This works OK, but I also have a MC below the button layer and this MC has some AS attached to it which basically makes it fade out to the image on the bottom layer.
It seems to me that the button script makes the MC script stop working because it's above the MC layer (I've switched the button layer below the MC layer and the fade out then works, but the button doesn't ). How can I get both scripts working together? I know that MC's can't work like buttons, but is there a work around this?
I'm sorry to have to ask this as I know there are many tutorials out there on how to do this, but using as2 how can I open a new browser window when a button is clicked, that is sized to specific dimensions? The reason I ask is because every bit of code I tried to use did absolutely nothing, when I clicked on the button nothing happened. This is the code I'm trying to use at the moment
Code:
getURL ("javascript:NewWindow=window.open('master.html','Title','width=1024,height=614,left=0,top=0,toolbar=No,location=No,scrollbars=No,status=No,resizable=No,fullscreen=No'); NewWindow.focus(); void(0);");
I'm using flash CS4, flash player 10 and actionscript 2
how to make the individual icons open separate menu once clicked in the way the iPhone does i know i would have to use an eventListener and basic tweening to make the new screens appear in the iphone like way but i just don't know how i would use this:
import fl.transitions.Tween;
import fl.transitions.easing.*;
var sliderBind:Rectangle = new Rectangle(2.25, 1.20, 174, 0);
homeScreenInterface_mc.visible = false;
[code]....
if i wanted a flash button when clicked on to open a html page in a i-frame how would this be done? what would the script be for this particulare action?
View 6 RepliesI am trying to make a button in such a way so that after you clicked on it, the button will change colour, indicating that the link has been visited.
View 3 RepliesI want to make a button (or graphic) active and visible if another button is clicked. But it must be invisible and unclickable before the other button is clicked. (this is a "find the differences between the 2 pictures game" and I want circles to appear over the differences that the user finds but only after he clicks it)
The button (or graphic) I want to become active has instance name of "sockcircle_btn" The button you click to make it appear is called "sock_btn"
In the first frame of the sockcircle_btn layer, this is my code
sockcircle_btn.addEventListener(MouseEvent.CLICK,sockcircledisable);
function sockcircledisable(evt:MouseEvent):void{
sockcircle_btn.mouseEnabled = false;
}
In the sock_btn frame (frame 3) this is my code
sock_btn.addEventListener(MouseEvent.CLICK,sockcircleenable);
function sockcircleenable(evt:MouseEvent):void{
sockcircle_btn.mouseEnabled = true;
}
The file is setup to loop between frames 2-3. But the sockcircle_btn never enables even when sock_btn is clicked.
I have a simple question for someone --Im very new at Flash. I have a box and 3 different colored buttons at the left. When a person clicks the red button the box turns red, green button turns the box green, etc. My question is I would like the text color of the box to appear under the box according to what button they press. Here is my code to turn the box red. What line would i add to have the word Red show up under the box when the red button is clicked. Do I type the word Red and make it a movie clip? Then what?
[Code]...
I am a super noob at actionscript. And I want my button to open a movieclip and then close the movieclip when clicked on again. I have no idea what to add after that here is the code I have for the button so far.....this button opens it.
on(release){
this.linemc5.gotoAndPlay("ear");
}
and this is another button I made that can close it, but I want it to be in the same button rather than seperate.
on(release){
this.linemc5.gotoAndPlay("earclose");
}
I know how to make a button and all.. but what do I do to make it go to the next scene?
scene 1: Startsidan
scene 2: Sidan
I made a frontpage and when I click on the picture I want it to go to scene 2, where it enters the inside.the button is called PortalenKnappen, I want to be able to just press on it and it will go to the "sidan(scene 2)" that's empty at the moment.what would I have to write? I've tried "portalenKnappen.onPress nextScene("sidan", 1"); but it doesn't work.
I'm trying to link a button to the next scene. But the problem is that I can't give an action to the button in the scene, because in the action panel appears: 'Current selection cannot have actions applied to it.' So I have to make a framelabel I guess but doesn't work eather, what's the next step?
View 4 RepliesI have been searching other threads and found another similar question, but the code did not work in my animation.
I am trying to make a button disappear after it has been clicked so that the animation underneath of it will be viewable.
This is hard to explain. Basically the user needs to choose their sex and type in their name then press the continue button. The gender selection is a bathroom identificationesque picture of a girl and boy. The boy is blue and the girl is pink. When you roll over the boy, it becomes a lighter blue and when you roll over the girl it becomes a lighter boy.
What I don't know how to do is that when you click on the boy, it stays a lighter blue, and lighter pink for the girl. That way they can see what selection they made. Also, when you click the boy then click the girl, the girl will become highlighted and the boy no longer will be (so you can only choose one gender). How do I do this? And how do I tell the program to store the info for later use? (when gender is important). I know that this type of action is used often in games so hopefully someone can help me.
For my Prototyping class I have to make an interactive fast food ordering system. I have majority of frames made I just need to add the interactive part to it. I am using AS2 in Flash CS3. I have the picture and the text grouped and are classified as a button. I want to make it so that when the picture or text is clicked it will make a black box appear around it, making it 'selected'. I've tried to add an Event Listener but couldn't figure out how to make the box appear on it.
These pictures are basically what I'm trying to accomplish.
i have tried to make the message appear when the button is clicked on but in vain.my objectivity is to make the "sorry.try again" message appear if the wrong button is clicked. 2 last tries will be given a chance. if stilll the third attempt is wrong, the answer message will appear.i think that i write wrong conditions so can u take a look at my file? what conditions to write after u take a look at my file.
View 4 RepliesHow to make a button stay down state after been clicked?
stop();
var ldr:Loader = new Loader();
ldr.x = 300;
[Code].....
For my newspaper i am creating each page has a next button and a previous button. I have assigned the previous button on one page to attach the movie of the page previous to it and then tested my movie. However when i click the previous button the movieclip does load but loads behind the starting moveiclip. So what i want to do is when the previous button is cliked, that page (movieclip) with the previous button on its dissappears and the previous page loads.
View 21 Repliesis there anyway to make the last 5 frames keep repeating unless the button is clicked??
View 2 RepliesI Want to have a button info_btn. Now i know how to make a button and link it to a scene/frame.
But what im asking is, i want the button to display something (text field or movieclip(doesn't matter )) but I do not want it to go to another scene or frame if you know what i mean ? i want it to display there and then on the same scene and frame with a button to close it.. Is this possible?
how do you make a button use the gotoandplay action to go to another scene? Its scene 420 i need to get to
View 3 RepliesHow do you make a button change the scene of the movie? I simply need to make a button change my movie to a different scene
View 5 Repliesi have a menu, that works with a xml file.the xml has the specific code that triggers the .as file:[code]when i press the button home for example, the home will load...then i press the button about, and it loads as well, but the home still playing on the back.how do i make the content for home to disapear when another button is clicked? because the code works for all the buttons, it has to be something generic that would work for the event of anybutton being clicked.
View 23 RepliesI have a tall web site that requires browser scrolling.When a button is clicked, the main movie is replaced by another, and unfortunately, the viewer isn't brought back to the top of the page.Here's the site: http:[url].....Scroll down, and click on the purple box that says "Knowledge & Experience."You will see my dilemma.how to make the browser scroll back to the top when a button is clicked?
View 9 Replieshow to make a button stay in the down position in CS3, Actionscript 3.0?
I have 3 buttons, each with the same roll over state. What I'd like to do is when the button is clicked, it remains in the roll over state until something else happens.
I have a button that when clicked starts a movie clip(a box enlarges from very tiny to large).That works fine. How do I make the same button reverse the movie clip when clicked again?
View 13 RepliesI'm aware this sounds quite involved, but would it be possible to make a Flash button counter that would store the number of clicks (that it displays) on a remote server; so even if the page was closed and re-opened it would still show "2" or "11" for example. In addition to that, would it be possible to only allow one click per IP address? So for example, one specific IP address (user) couldn't keep clicking it over and over and increasing the number.
The reason I wanted to use a Flash object as opposed to something like jQuery was because I want to embed it on a forum that isn't mine. Obviously I don't have access to the site's files/modules etc. Essentially it's almost like the Facebook "like button." It displays the number of likes, as well is storing the value on a remote server.