On the site we need to implement a mark on the photograph. By type as in facebook. It is desirable but not necessary that the selection of the object was not the rectangle, and polygon. There is a ready-realization? It does not matter what technology to use php, flash, and other, exotic but not necessary:)
View 3 RepliesI am using CS4 with AS 3.0... I want to implement both a freeware photo flash gallery and mp3 audio player that I found into my all-Flash website. Both of these require reading from an xml file to get their content. They both come with html embedding instructions, but I don't know about actionscript.
View 14 RepliesI have an array that basically calls out numbers for a gotoAndStop action. We have external swfs that get loaded in. Each slide is its own frame in the external swf and they want the flexibility to remove slides at the last minute so my array looks like this:
Code:
var myDocs:Array = ["1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12", "13", "14", "15", "16", "17", "18", "19", "20", "21", "22"];
var i:Number = 0;
There are going to be a lot of sections with a varied number of slides and I am looking for a simple code I can attach to the navigation that basically says:
Code:
on (release) {
if (you have not reached the end of the array);{
++i;
gotoAndStop(myDocs[i]);}
}
Is there a code out there that doesn't require you to put specific number values in? like "if (i<22)"?
ive been trying to get swfaddress working. And everything works fine ( the getValue function shows the right content, setTitle does its job etc ) except for setValue. When i set it to for instance setValue("news"), the url in the browser is updated to index.html?#news
that question mark shouldn't be there i guess... it also reloads my page every time. I have no idea where to start looking as i dont know what's causing it. anyone else had this issue before ?
its for a photo gallery that I downlowded,the images fades in and out, but only start that when you click a button(timer).I'm trying to founf out where in the script I can change this, so that the photo's start automatically,rather than, on a button click.I have pasted the script below, is that ok, or would people rather a zip file of the files?
// (c) Copyright by Andrew DiFiore. All rights reserved. DO NOT REMOVE.
fscommand("allowscale", "false");
Stage.scaleMode = "noScale";[code]......
How do we make an entire block of code (maybe 10 lines) as comment.
Maybe just to deactivate a code block when trouble shooting AS code.
There are 3 flv movie in my flash page. Is there a way to indicate in my flash page if the flv movie is already viewed on user's browser? I need to put a mark on the movie if one of them is already viewed? Am I to use Shared Object?
View 4 RepliesSee [URL] looking carefully, youll see this code is supose to add two check marks, both of which are in the libary. they are supose to appear at seprate places.
View 4 Replies[code]...
above im using that regular expression to escape the " in the string. however it only does it for the first "
is it possible to mark parameters as private, only accessible/useful for the class that owns the function?
example:
//PRIVATE CLASS (.SWC)
public function set AutoBounce(value:Boolean):void
{
if (value)
[Code].....
rather than redirecting, is there any better way to dealing with this issue? maybe "better way" is a poor choice of words. is there a way to refactor this code without using a forwarding function or having to force the user to include the event parameter.
I am fairly new to flash and are trying to create an imagegallery from an xml file. The galleri menu is coming from xmlList.length. Now i want to mark the menuitem that is currently active (as in the picture is beeing shown) but i really cant accomplish this (Googling intense and trial end error).
[Code]....
i'm doing a multiple choice quiz. i've got a problem in load the mark from other .swf file.
[URL]
1stly i need to run the Game01.fla to loadMovie of quiz.01.swf. thing that ive problem is,the main file(Game01) doesn't detect the the page of quiz01 loaded. ive no idea what to do.hope any pros of flash can give me hand.. when user insert their name,their need to answer all the question. i do by loadMovie of the question in mc_loader01. after they done the quiz, all the mark must pass to main page(Game01), but isn't happen..
I want to mark a movieclip after xx seconds when the mouse is over it, like a rollover.
I use a tooltip script to test it.
Code:
tooltip._visible = false;
var tipInt;
// Define the function
[Code].....
I've made a .swf object in flash and I've used dynamic text and embedded all the english characters. However, when the .swf is viewed on a web page, the does not show up.It is there though, because if you select all the text and paste it elsewhere, it is there.
Here's the page I'm referring to: www.chaseproducts.com/news/H1N1_master_ad/
I want to get the � mark showing up in the text on the arrow...
How can I make a quotation mark show up inside a string? [code]
View 2 RepliesI found the tutorial by Kirupa
[Code]...
I have had a website that has been up and successfully running for about a year now. Admittedly, it's a little buggy here and there, however - I have not had too many issues with it to date. Recently, however, I updated the main / root .swf slightly - just changed some copy, and added a slide or two throughout. When visiting the site, this main .swf dynamically loads any content .swfs required - the html, and these .swfs were not touched.
Upon uploading the new main .swf only - everything works fun, until it loads one of the content .swfs - this always loads in the top left of the browser, rather than the center top of the browser.
[Code]...
I am using a php mp3 handler script that I use as a parameter,but it seems to mess everything up just because there is a question mark after .php for my get variables. If I remove the question mark (mp3_handler.php?), the player appears, but with the question mark, it shows up as a text box. The first player works fine. The second just appears as a textbox in IE.The second however works in every other browser!!!
UPDATE: IT SEEMS TO BE THE second QUESTION MARK, but I do not see a way around this.. Oddly enough, the first question mark does not make a difference
<object width="165" height="37" id="niftyPlayer1" align="">
<param name=movie value="nifty/niftyplayer.swf?file=song.mp3&as=0">
<param name="wmode" value="transparent">[code].....
i build a context menu and i want when user click on contextmenuitem then check mark tick is visible with contextmenuitem and when again user click on the same contextmenu item then check mark tick is visible off
View 1 RepliesI have built a pre-loader from tutorials that seems to work well except that you can't see it until it hits about 8o% loaded.
this is the code for frame 1 of my movie. (loading is a text box that shows the percentage as it loads)
ActionScript Code:
stop();
onEnterFrame = function(){
var percentLoaded = _root.getBytesLoaded()/_root.getBytesTotal();
[Code].....
why the screen stays blank up until until that 8o% mark when it seems like the whole frame(preloader) loads?
It seems like everytime I get comfortable with some aspect of programming, I attempt another one that makes me wonder why I program in the first place! My mac is lucky I can't afford to throw it out the window.
I've got a SWF that calls up external swfs via XML. Users are able to navigate to each external swf using a next button. When a user views the external swf, I need to mark it as 'viewed'. This way, if the user leaves the site prior to seeing all swfs, they can come back and start where they left off and view only the swfs they haven't seen.
What is the best method for setting this up? Array? Somehow parsing the XML file?
I'm making a blog/journal in flash that I will manually update, and there will be a list of entries in a menu. I would like the newer entries tinted red so they are obviously new at a glance. I would like them to stay red for a week, then automatically remove the tint.
So I'm guessing that when I manually update the entry, I could just plug in the current date into a field in the AS, and it would use the computers clock to find out if a week had passed or not.
I am trying to user getURL with a question mark in it... ie getURL("default.html?something_here=1"); but it ignores everything after the question mark.
View 3 RepliesThe image describes my issue, I am trying to find the vector of the question mark, which should describe the objects new vector for velocity.
vector (7,2) is my objects current velocity.
If I know the new angle, how can I get the new vector?
I am trying to use the getURL function to open a new window with a variable URL, but it doesn't seem to be doing what I want it to. Here is the code i am using:
on (release) {
getURL("popup.htm?/projects/"+_root.foldername+"/"+_root.projname+"_1highres.jpg", "_blank")
}
The problem appears to be the question mark. If I remove the question mark it works fine.. but I need to use the question mark because the rest of the info is just information I am having popup.htm interpret
Actionsctipt code:
on(press)
{
getURL(escape("address.html?0"));
}
This works absolutely fine in Internet Explorer but in Chrome in the question mark is obviously made into "%3F". how I can stop this from happening and still keep it compatible with IE and other popular browsers?
import org.papervision3d.scenes.*;
import org.papervision3d.cameras.*;
import org.papervision3d.objects.*;
[Code].....
[URL]
From this picture example, how do you assign a command to a column for it to respond based upon a value you give it. For example, if I click on the lease tab, how do I set to respond after clicking once where everything in the colum shows at the top from smallest # to greatest. Then if I hit the tab again, it will do the opposite.
Another example, lets stay I click on the word name I would like the columns under it to display in alphabetical order .
Additionally I would like to include a check marker that displaced the price upon which item you select and then set that for purchaes.
Is there possibility to mark options in right click context menu ?
For example, if you right click on Windows bar, Lock the Taskbar is checked (marked).
I have an XML file which contains some texts, let's say testimonials or something like that. It contains characters like commas, inverted commas, question marks, periods etc. But it does have exclamation marks too.. I think exclamation mark is an invalid character in XML. Anyway, how to display this exclamation mark in dynamic text in AS3? The XML is modifying by a third person. So it will be difficult if we say type this pattern to replace it for exclamation mark....
View 5 Replies